Bond interfaces stuck at 1500 MTU on Bionic

Output of dmesg on Bionic - note interface MTU being changed from 9000 to 1500.

Looking at the MAAS curtin configuration, I see the following:

  - bond_interfaces:
    - enp5s0f0
    - enp5s0f1
    - enp6s0f0
    - enp6s0f1
    id: eth1
    mac_address: 00:1b:21:4a:99:50
    mtu: 9000
    name: eth1
    params:
      bond-downdelay: 0
      bond-lacp-rate: fast
      bond-miimon: 100
      bond-mode: 802.3ad
      bond-updelay: 0
      bond-xmit-hash-policy: encap3+4
    subnets:
    - type: manual
    type: bond

The resulting netplan configuration, however, doesn't include an MTU. On the other hand, the Xenial configuration does correctly have the MTU for the bond.

As such, this seems like an issue in cloud-init to me.

Can you manually change the mtu in the netplan yaml under eth1? If you do so, is the MTU then set correctly?

@cyphermox I'm deploying the machine back to Bionic to try this now. Can you confirm where exactly in the netplan config I need to set this? (e.g. in the bonds section, or add a new eth1 definition to the ethernets section?)

In the existing bonds section, for the interface that is your bond (eth1)

I've added "mtu: 9000" to the bonds section, which now reads as follows;

    bonds:
        eth1:
            mtu: 9000
            interfaces:
            - enp5s0f0
            - enp5s0f1
            - enp6s0f0
            - enp6s0f1
            parameters:
                down-delay: 0
                lacp-rate: fast
                mii-monitor-interval: 100
                mode: 802.3ad
                transmit-hash-policy: encap3+4
                up-delay: 0

I re-ran netplan apply, but the bond had the same MTU as before. I also tried restarting systemd-networkd as I could see that the relevant .netdev files in /run/systemd/network/ had MTUBytes set to 9000. However, the interface remained at 1500 bytes.

After a system restart however, the bond interface is now running at a MTU of 9000. dmesg now only has messages for the member interfaces being increased from 1500 to 9000 MTU - the messages regarding the MTU being lowered from 9000 to 1500 when the bond was being configured are no longer present.

Status changed to 'Confirmed' because the bug affects multiple users.

We are seeing this in our test runs as well.

This is causing test failures for us, because containers deployed by juju that are bound to a space that sits on top of the bond have the corrent mtu (9000) but the bond's mtu is stuck at (1500), so packets are being dropped.

curtin config for the machine:
http://paste.ubuntu.com/p/8tMR2YBGYm/

cloud-init netplan yaml (50-cloud-init.yaml.bak.1528231254):
http://paste.ubuntu.com/p/Vkq77KqwBp/

juju netplan yaml:
http://paste.ubuntu.com/p/wf9F2xzCy6/

Subscribed to Canonical Field High SLA.

An upstream commit landed for this bug.

To view that commit see the following URL:
https://git.launchpad.net/cloud-init/commit/?id=c3f1ad9a

hrm, didn't intend to nominate netplan.io for xenial, artful, bionic, cosmic; only cloud-init. Not sure how to revoke the netplan.io nomination

Somehow the netplan.io and cloud-init tasks are linked in terms of those nominations. If I approve the cloud-init ones, netplan's also get approved.

This is a cloud-init issue only. Once cloud-init is SRU'd netplan will properly set mtu.

Setting netplan series tasks as invalid as this is a cloud-init bug, netplan on artful++ will do as cloud-init tells it, but we need an SRU for cloud-init into artful/bionic to fix things. (and a new cloud-init devel release is cosmic this week to fix behavior).

This bug was fixed in the package cloud-init - 18.2-77-g4ce67201-0ubuntu1

---------------
cloud-init (18.2-77-g4ce67201-0ubuntu1) cosmic; urgency=medium

  * New upstream snapshot.
    - lxd: Delete default network and detach device if lxd-init created them.
      (LP: #1776958)
    - openstack: avoid unneeded metadata probe on non-openstack platforms
      (LP: #1776701)
    - stages: fix tracebacks if a module stage is undefined or empty
      [Robert Schweikert] (LP: #1770462)
    - Be more safe on string/bytes when writing multipart user-data to disk.
      (LP: #1768600)
    - Fix get_proc_env for pids that have non-utf8 content in environment.
      (LP: #1775371)
    - tests: fix salt_minion integration test on bionic and later
    - tests: provide human-readable integration test summary when --verbose
    - tests: skip chrony integration tests on lxd running artful or older
    - test: add optional --preserve-instance arg to integraiton tests
    - netplan: fix mtu if provided by network config for all rendered types
      (LP: #1774666)
    - tests: remove pip install workarounds for pylxd, take upstream fix.
    - subp: support combine_capture argument.
    - tests: ordered tox dependencies for pylxd install

 -- Chad Smith <email address hidden> Fri, 15 Jun 2018 20:05:07 -0600

This bug is believed to be fixed in cloud-init in version 18.3. If this is still a problem for you, please make a comment and set the state back to New

Thank you.

Status changed to 'Confirmed' because the bug affects multiple users.

FWIW, we squarely hit this while redeploying our dev cloud (serverstack) on bionic, which uses bonds and jumbo frames.

Hi,
This bug is belived to be fixed in the version of cloud-init in -proposed of 16.04, 17.10 and 18.04 under SRU bug 1777912.

It would be good if someone could report back on that bug as to whether or not this is now working for them.

Marked as Fix Released on Bionic/Xenial because the SRU for bug 1777912 is done. I can't make Artful "Won't Fix", but it should be.

Tracked in Github Issues as https://github.com/canonical/cloud-init/issues/3190