netplan should not try to unbind brcmfmac (like brcmfmac-sdio)

debdiff to also prevent plain brcmfmac from unbinding

a package with this fix is in https://launchpad.net/~snappy-dev/+archive/ubuntu/image/+packages?field.name_filter=&field.status_filter=published&field.series_filter=xenial

(and thus in the Ubuntu Core core snap in the edge channel)

This bug was fixed in the package nplan - 0.26

---------------
nplan (0.26) artful; urgency=medium

  * Bonding:
    - Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
    - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
      rebind. (LP: #1712224)
  * Autopkgtests:
    - Add allow-stderr. Systemd now bleats about a the networkd socket still
      being around and enabled when we restart the service; but we don't need
      to care since we're /restarting/ the service to load the new config.
    - Fix the autostart package to be more sensible: we don't really care if
      networkd autostarts or not, but we need to make sure that our generator
      will run at boot, so instead check the state, but only assert it once
      we've added a config file and before checking the state of our dummy
      device.
    - Do a bit more to make sure "mix" tests which stack virtual devices are
      as reliable as possible; by setting saner defaults.

 -- Mathieu Trudel-Lapierre <email address hidden> Wed, 23 Aug 2017 19:32:33 -0400

Thanks ! though sorry, I forgot to open a xenial task for the SRU (since we need the fix in Ubuntu Core), i did that now...

Hello Oliver, or anyone else affected,

Accepted nplan into zesty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.29~17.04.1 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-zesty to verification-done-zesty. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-zesty. In either case, details of your testing will help us make a better decision.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance!

Hello Oliver, or anyone else affected,

Accepted nplan into xenial-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.29~16.04.1 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-xenial to verification-done-xenial. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-xenial. In either case, details of your testing will help us make a better decision.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance!

Hello Oliver, or anyone else affected,

Accepted nplan into zesty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.32~17.04.1 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-zesty to verification-done-zesty. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-zesty. In either case, details of your testing will help us make a better decision.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance!

Hello Oliver, or anyone else affected,

Accepted nplan into xenial-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.1 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-xenial to verification-done-xenial. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-xenial. In either case, details of your testing will help us make a better decision.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance!

nplan 0.32~16.04.2 fails to build because I mismerged 0.32 and broke the code skipping the test_routes_v6 test in the NetworkManager case. Therefore, it can't possibly pass SRU verification.

note that i tested 0.29~16.04.1 from xenial-proposed before you uploaded 0.32~16.04.2

Hello Oliver, or anyone else affected,

Accepted nplan into xenial-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.2 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-xenial to verification-done-xenial. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-xenial. In either case, details of your testing will help us make a better decision.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance!

Autopktests still failing for xenial; the test is still not being skipped (we know it won't work on Xenial due to the version of NM shipped there). Marking verification-failed-xenial.

Hello Oliver, or anyone else affected,

Accepted nplan into xenial-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.3 in a few hours, and then in the -proposed repository.

Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-xenial to verification-done-xenial. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-xenial. In either case, details of your testing will help us make a better decision.

Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance!

Verification-done for xenial 0.32~16.04.3, and zesty 0.32~17.04.1:

Both are now skipping brcmfmac drivers ('if brcmfmac in driver_name').

This bug was fixed in the package nplan - 0.32~16.04.3

---------------
nplan (0.32~16.04.3) xenial; urgency=medium

  * tests/integration.py: Really fix skipping test_routes_v6 for the NM
    backend.

nplan (0.32~16.04.2) xenial; urgency=medium

  * tests/integration.py: Fix test_routes_v6 that I clobbered when I re-applied
    the skip rules for 16.04 after merging in 0.32.

nplan (0.32~16.04.1) xenial; urgency=medium

  * Backport netplan 0.32 to 16.04. (LP: #1713142)
  * debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
    feature backported in that revision.
  * tests/integration.py: Skip tests that are still not yet supported in xenial

nplan (0.32) bionic; urgency=medium

  * src/nm.c: better handle the UUID generation; the order of iterating
    through interaces may affect things here. Also make sure the tests catch
    a null UUID.

nplan (0.31) bionic; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * src/nm.c: generate a UUID for a connection only as needed; when we're
    dealing with NM VLANs. (LP: #1712921)
  * debian/tests/autostart: Make the autostart test more verbose and avoid
    failing right from the start when systemd-networkd is disabled.
    (LP: #1699371)
  * tests/integration.py: bump the NetworkManager timeout for settling to
    120 seconds, autopkgtest infrastructure tends to be a little slow for the
    network device configuration to be applied and noticed by NM.
    (LP: #1699371)

  [ Dimitri John Ledkov ]
  * Reload udevd to invalidate configuration cache of .rules/.link files
    as generate step may have changed them. LP: #1669564

  [ Dan Streetman ]
  * Add another interface driver exception to netplan replug to prevent unbind
    of the Xen VIF interfaces. (LP: #1729573)

nplan (0.30) artful; urgency=medium

  * Add an "optional" syntax node for now to all devices. This is unimplemented
    for now, but intended to allow users to mark some devices as optional: to
    make sure they do not delay boot when configured. (LP: #1664844)

nplan (0.29) artful; urgency=medium

  * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
    exists. nplan is enabled by default, so it might well have the directory
    already created on the filesystem.

nplan (0.28) artful; urgency=medium

  * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
    broke default network config in LXD and was contrary to the defaults used
    by the kernel. Reopens LP: 1655440. (LP: #1717404)
  * Add "accept-ra:" key for all device types; this will default to OFF but
    allow users to disable processing Router Advertisements when required by
    their network setup. (LP: #1655440)

nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
    (LP: #1717471)
  * tests/integration.py: fix resolved detection.

nplan (0.26) artful; urgency=medium

 ...

The verification of the Stable Release Update for nplan has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions.

This bug was fixed in the package nplan - 0.32~17.04.1

---------------
nplan (0.32~17.04.1) zesty; urgency=medium

  * Backport 0.32 to 17.04. (LP: #1713142)

nplan (0.32) bionic; urgency=medium

  * src/nm.c: better handle the UUID generation; the order of iterating
    through interaces may affect things here. Also make sure the tests catch
    a null UUID.

nplan (0.31) bionic; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * src/nm.c: generate a UUID for a connection only as needed; when we're
    dealing with NM VLANs. (LP: #1712921)
  * debian/tests/autostart: Make the autostart test more verbose and avoid
    failing right from the start when systemd-networkd is disabled.
    (LP: #1699371)
  * tests/integration.py: bump the NetworkManager timeout for settling to
    120 seconds, autopkgtest infrastructure tends to be a little slow for the
    network device configuration to be applied and noticed by NM.
    (LP: #1699371)

  [ Dimitri John Ledkov ]
  * Reload udevd to invalidate configuration cache of .rules/.link files
    as generate step may have changed them. LP: #1669564

  [ Dan Streetman ]
  * Add another interface driver exception to netplan replug to prevent unbind
    of the Xen VIF interfaces. (LP: #1729573)

nplan (0.30) artful; urgency=medium

  * Add an "optional" syntax node for now to all devices. This is unimplemented
    for now, but intended to allow users to mark some devices as optional: to
    make sure they do not delay boot when configured. (LP: #1664844)

nplan (0.29) artful; urgency=medium

  * Fix autopkgtests in a world where /run/NetworkManager/conf.d already
    exists. nplan is enabled by default, so it might well have the directory
    already created on the filesystem.

nplan (0.28) artful; urgency=medium

  * Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
    broke default network config in LXD and was contrary to the defaults used
    by the kernel. Reopens LP: 1655440. (LP: #1717404)
  * Add "accept-ra:" key for all device types; this will default to OFF but
    allow users to disable processing Router Advertisements when required by
    their network setup. (LP: #1655440)

nplan (0.27) artful; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * Fix crash in systemd generator if called by an user on the command-line
  * coverage: fix exclusions to properly not cover our "never reached defaults"

  [ Dimitri John Ledkov ]
  * tests/integration.py: In teardown, stop systemd-networkd.socket.
  * src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
    (LP: #1717471)
  * tests/integration.py: fix resolved detection.

nplan (0.26) artful; urgency=medium

  * Bonding:
    - Add support for specifying a primary slave. (LP: #1709135)
  * Rebind:
    - Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
      rebind. (LP: #1712224)
  * Autopkgtests:
    - Add allow-stderr. Systemd now bleats about a the networkd socket still
      being around and enabled when we restart the service; but we don't need
      to care since we're /restarting/ the service to load the new config.
    - Fix the autostart package to be more sensible: we don't really care if
 ...