lp:cura

Owned by Ultimaker
Get this repository:
git clone https://git.launchpad.net/cura

Import details

Import Status: Reviewed

This repository is an import of the Git repository at https://github.com/Ultimaker/Cura.git.

The next import is scheduled to run .

Last successful import was .

Import started on juju-98ee42-prod-launchpad-codeimport-5 and finished taking 3 minutes — see the log
Import started on juju-98ee42-prod-launchpad-codeimport-5 and finished taking 3 minutes — see the log
Import started on juju-98ee42-prod-launchpad-codeimport-0 and finished taking 3 minutes — see the log
Import started on juju-98ee42-prod-launchpad-codeimport-1 and finished taking 4 minutes — see the log
Import started on juju-98ee42-prod-launchpad-codeimport-5 and finished taking 2 minutes — see the log
Import started on juju-98ee42-prod-launchpad-codeimport-4 and finished taking 3 minutes — see the log
Import started on juju-98ee42-prod-launchpad-codeimport-0 and finished taking 2 minutes — see the log
Import started on juju-98ee42-prod-launchpad-codeimport-5 and finished taking 5 minutes — see the log
Import started on juju-98ee42-prod-launchpad-codeimport-4 and finished taking 4 minutes — see the log
Import started on juju-98ee42-prod-launchpad-codeimport-4 and finished taking 2 minutes — see the log

Updating repository...

Launchpad is processing new changes to this repository which will be available shortly. Reload to see the changes.

Branches

Name Last Modified Last Commit
PP-485-0.15mm-profiles-PVA-and-BAM 2024-05-24 09:54:38 UTC
New 0.15mm mode for the factor 4 for PVA and BAM.

Author: Paul Kuiper
Author Date: 2024-05-24 09:54:38 UTC

New 0.15mm mode for the factor 4 for PVA and BAM.
Needed by 0.15mm 3rd party material profiles that require support.

PP-485

PP-371-Prevent-wrong-temperature-with-support-materials 2024-05-24 08:52:06 UTC
Preventing PVA and BAM to interfer with the build plate and build volume temp...

Author: Paul Kuiper
Author Date: 2024-05-24 08:52:06 UTC

Preventing PVA and BAM to interfer with the build plate and build volume temperature settings of the model material.

PP-371

CURA-11830_smart_seam_unretract 2024-05-24 08:21:36 UTC
Merge remote-tracking branch 'origin/main' into CURA-11830_smart_seam_unretract

Author: Erwan MATHIEU
Author Date: 2024-05-24 08:21:36 UTC

Merge remote-tracking branch 'origin/main' into CURA-11830_smart_seam_unretract

PP-480-Fix-generic-profiles-factor-4 2024-05-23 12:51:27 UTC
Merge branch 'main' into PP-480-Fix-generic-profiles-factor-4

Author: Erwan MATHIEU
Author Date: 2024-05-23 12:51:27 UTC

Merge branch 'main' into PP-480-Fix-generic-profiles-factor-4

5.7 2024-05-23 12:45:56 UTC
Set version 5.7.2

Author: Erwan MATHIEU
Author Date: 2024-05-23 12:45:56 UTC

Set version 5.7.2

main 2024-05-23 12:21:59 UTC
Merge pull request #19124 from Ultimaker/reduce-printer-linter-access-rights

Author: Jelle Spijker
Author Date: 2024-05-23 12:21:59 UTC

Merge pull request #19124 from Ultimaker/reduce-printer-linter-access-rights

Reduce permissions on printer-linter GitHub actions

reduce-printer-linter-access-rights 2024-05-23 09:49:35 UTC
Reduce permissions on printer-linter GitHub actions

Author: Erwan MATHIEU
Author Date: 2024-05-23 09:49:35 UTC

Reduce permissions on printer-linter GitHub actions

Previously they had no permission set, so by default all write access. We now specify only the required permissions for each of them.

CURA-11547_linux_self_hosted_runner 2024-05-22 13:36:15 UTC
Update linux.yml

Author: HellAholic
Author Date: 2024-05-22 13:36:15 UTC

Update linux.yml

printer_extruder_reference_test 2024-05-07 09:50:38 UTC
Create TestPrinterExtruderTrains.py

Author: HellAholic
Author Date: 2024-05-07 09:50:38 UTC

Create TestPrinterExtruderTrains.py

CURA-11079_update_cpython 2024-05-03 11:55:44 UTC
Update cpython dependency to generic version

Author: Jelle Spijker
Author Date: 2024-05-03 11:55:44 UTC

Update cpython dependency to generic version

The cpython dependency in both Uranium and conanfile.py has been updated from a specific version "cpython/3.12.2@ultimaker/cura_11079" to a more generic version "cpython/3.12.2". This will help with compatibility and dependency management in the future.

Contribute to CURA-11079

PP-476-Make-PPS-CF-a-bundled-package 2024-05-02 16:59:48 UTC
Added PPS-CF as bundled package.

Author: Paul Kuiper
Author Date: 2024-05-02 16:59:48 UTC

Added PPS-CF as bundled package.

PP-476

CURA-11658-memory-leak 2024-05-01 08:00:05 UTC
Merge branch 'main' into CURA-11658-memory-leak

Author: HellAholic
Author Date: 2024-05-01 08:00:05 UTC

Merge branch 'main' into CURA-11658-memory-leak

CURA-11696-spiral-z-hop 2024-04-30 08:32:47 UTC
Applied printer-linter format

Author: saumyaj3
Author Date: 2024-04-30 08:32:47 UTC

Applied printer-linter format

template_update_5.7 2024-04-28 14:31:22 UTC
Update SlicingCrash.yaml

Author: HellAholic
Author Date: 2024-04-28 14:31:22 UTC

Update SlicingCrash.yaml

CURA-11834-ambient-occlusion 2024-04-24 16:31:33 UTC
Add "Z seam in least visible areas" option to fdmprinter settings

Author: Saumya Jain
Author Date: 2024-04-24 16:31:33 UTC

Add "Z seam in least visible areas" option to fdmprinter settings

CURA-11834

PP-470-Release-Factor-4-profiles 2024-04-22 08:48:23 UTC
Updating name translation tables for Factor 4.

Author: Paul Kuiper
Author Date: 2024-04-22 08:48:23 UTC

Updating name translation tables for Factor 4.

PP-470

GRID_DEBUG_SVG 2024-04-13 06:47:17 UTC
Example debug svg output

Author: c.lamboo
Author Date: 2024-04-13 06:47:17 UTC

Example debug svg output

master 2024-04-12 09:08:35 UTC
Made printprocess reporting settings not settable per mesh

Author: Jaime van Kessel
Author Date: 2024-04-12 09:08:35 UTC

Made printprocess reporting settings not settable per mesh

yttr 2024-04-10 12:54:11 UTC
Merge branch 'CURA-10901-warn-if-formulas-are-NOK' into yttr

Author: Saumya Jain
Author Date: 2024-04-10 12:54:11 UTC

Merge branch 'CURA-10901-warn-if-formulas-are-NOK' into yttr

PP-449-Improve-seam-position 2024-03-25 18:47:36 UTC
Enable smart seam position for all UltiMaker machines.

Author: Paul Kuiper
Author Date: 2024-03-25 18:47:36 UTC

Enable smart seam position for all UltiMaker machines.

PP-449

CUR-11720-ucp-correct-ovverrides-ii 2024-03-18 14:45:11 UTC
Merge branch '5.7' into CUR-11720-ucp-correct-ovverrides-ii

Author: Saumya Jain
Author Date: 2024-03-18 14:45:11 UTC

Merge branch '5.7' into CUR-11720-ucp-correct-ovverrides-ii

CUR-11720-ucp-correct-ovverrides 2024-03-14 16:09:11 UTC
Apparantly the first time override is written it is not overriden by next upl...

Author: Saumya Jain
Author Date: 2024-03-14 16:09:11 UTC

Apparantly the first time override is written it is not overriden by next upload.
Now, it does

CURA-11720

um-cloud-plugin-cleanup 2024-03-14 15:54:16 UTC
Only load machine_id_to_name.json when it's needed for the first time

Author: Frederic Meeuwissen
Author Date: 2024-03-14 15:54:16 UTC

Only load machine_id_to_name.json when it's needed for the first time

CURA-11640 2024-03-12 08:24:55 UTC
Apply some defensive programming

Author: c.lamboo
Author Date: 2024-03-12 08:24:55 UTC

Apply some defensive programming

We have logs that retrieving the `accessToken` would crash Cura. By adding some defensive programming, in combination with proper error logging the crash no longer happens, and as programmers we have proper logging where the error occurred.

CURA-11640

CURA-11710-names-in-method-materials 2024-03-11 12:04:26 UTC
Add missing ABS-CF material to material map

Author: c.lamboo
Author Date: 2024-03-11 12:04:26 UTC

Add missing ABS-CF material to material map

CURA-11710

PP-428-Improve-TPU-top-surface 2024-03-11 11:39:55 UTC
Sync with main.

Author: Paul Kuiper
Author Date: 2024-03-11 11:39:55 UTC

Sync with main.

PP-428

CURA-11705-updating-strings-in-CURA 2024-03-08 13:46:04 UTC
Merge branch 'main' into CURA-11705-updating-strings-in-CURA

Author: Saumya Jain
Author Date: 2024-03-08 13:46:04 UTC

Merge branch 'main' into CURA-11705-updating-strings-in-CURA

PP-428-2-Improve-TPU-top-surface 2024-03-07 16:27:07 UTC
Improve top layer quality of TPU

Author: Frederic Meeuwissen
Author Date: 2024-03-07 16:27:07 UTC

Improve top layer quality of TPU

Recommited from Paul's changes to resolve conflicts

use-proper-gradualflow_version 2024-03-07 10:51:55 UTC
Merge branch 'main' into use-proper-gradualflow_version

Author: Erwan MATHIEU
Author Date: 2024-03-07 10:51:55 UTC

Merge branch 'main' into use-proper-gradualflow_version

CURA-11657_fix_usb_print_crash 2024-03-07 10:15:48 UTC
Merge branch 'main' into CURA-11657_fix_usb_print_crash

Author: Saumya Jain
Author Date: 2024-03-07 10:15:48 UTC

Merge branch 'main' into CURA-11657_fix_usb_print_crash

CURA-11556-proof-of-concept 2024-02-27 20:20:29 UTC
Test if we can differentiate between makerbotfile types based on mime types

Author: c.lamboo
Author Date: 2024-02-27 20:20:29 UTC

Test if we can differentiate between makerbotfile types based on mime types

CURA-11556

CURA-11356 2024-02-26 17:17:54 UTC
Refactor plugin start process in BackendPlugin

Author: Jelle Spijker
Author Date: 2024-02-26 17:17:54 UTC

Refactor plugin start process in BackendPlugin

This commit simplifies the process of starting plugins in BackendPlugin.py. The changes include removal of unnecessary code for setting LD_LIBRARY_PATH and converting the assigned environment to a dictionary. This leads to cleaner, more maintainable code.

Contribute to CURA-11356

restore_geeetech_A20_1_extruder_definition 2024-02-19 10:39:20 UTC
Applied printer-linter format

Author: HellAholic
Author Date: 2024-02-19 10:39:20 UTC

Applied printer-linter format

PP-433_Any-Color 2024-02-16 13:04:54 UTC
Convert machine definition exclude_materials

Author: Frederic Meeuwissen
Author Date: 2024-02-16 13:04:54 UTC

Convert machine definition exclude_materials

Automatically converted to use a regex instead of python's `str.__contains__`.

CURA-11561_mockup_pap 2024-02-16 10:47:32 UTC
Merge branch 'main' into CURA-11561_mockup_pap

Author: Saumya Jain
Author Date: 2024-02-16 10:47:32 UTC

Merge branch 'main' into CURA-11561_mockup_pap

CURA-7834 2024-02-15 14:59:36 UTC
Merge branch 'main' into CURA-7834

Author: c.lamboo
Author Date: 2024-02-15 14:59:36 UTC

Merge branch 'main' into CURA-7834

mac-file-association 2024-02-08 15:14:27 UTC
Add file association for mac

Author: c.lamboo
Author Date: 2024-02-08 15:14:27 UTC

Add file association for mac

5.6E 2024-01-25 09:40:18 UTC
languages missing in Enterprise release

Author: saumya.jain
Author Date: 2024-01-25 09:40:18 UTC

languages missing in Enterprise release

flag enable_i18n was not to true anywhere

CURA-11564

process-pull-request_Add_label_permissions 2024-01-22 15:26:04 UTC
Update process-pull-request.yml

Author: HellAholic
Author Date: 2024-01-22 15:26:04 UTC

Update process-pull-request.yml

CURA-11483_mac_crash 2024-01-19 11:00:08 UTC
Make sure that Qt6 libs on Mac are in the root

Author: Jelle Spijker
Author Date: 2024-01-19 11:00:08 UTC

Make sure that Qt6 libs on Mac are in the root

Contribute to CURA-11483

5.7alpha 2024-01-19 10:46:48 UTC
Add arcus requirement

Author: c.lamboo
Author Date: 2024-01-19 10:46:48 UTC

Add arcus requirement

CURA-11544_self_hosted_windows_runner 2024-01-17 11:06:05 UTC
Merge branch 'main' into CURA-11544_self_hosted_windows_runner

Author: Jelle Spijker
Author Date: 2024-01-17 11:06:05 UTC

Merge branch 'main' into CURA-11544_self_hosted_windows_runner

CURA-11441_fix_fan_speed_range 2024-01-16 15:54:19 UTC
Fix method printers fan range

Author: Erwan MATHIEU
Author Date: 2024-01-16 15:54:19 UTC

Fix method printers fan range

CURA-11441

PP-423-Small-top/bottom-width-and-wipe-distance 2024-01-16 15:08:02 UTC
Improve seam quality by increasing the wip distance and the small top/bottom ...

Author: Paul Kuiper
Author Date: 2024-01-16 15:08:02 UTC

Improve seam quality by increasing the wip distance and the small top/bottom distance.

PP-423

fix_material_name_crash 2024-01-16 09:01:26 UTC
change label to name to align with items in global_container_stack check

Author: HellAholic
Author Date: 2024-01-16 09:01:26 UTC

change label to name to align with items in global_container_stack check

CURA-7812-decrease-Qml-singletons 2024-01-12 10:13:42 UTC
fixing deprecated warning message

Author: saumya.jain
Author Date: 2024-01-12 10:13:42 UTC

fixing deprecated warning message

CURA-7812

PP-421-Decrease-initial-layer-speed 2024-01-03 16:54:36 UTC
Decrease initial layer speed for S3 and S5 machine for the high speed print m...

Author: Paul Kuiper
Author Date: 2024-01-03 16:54:36 UTC

Decrease initial layer speed for S3 and S5 machine for the high speed print modes to improve robustness (esp. when no glue is used).

PP-421

5.6 2023-12-21 09:44:23 UTC
Drop resoources folder from cura-binary data

Author: c.lamboo
Author Date: 2023-12-21 09:44:23 UTC

Drop resoources folder from cura-binary data

CURA-7647-small-proof-of-concept 2023-12-18 09:38:57 UTC
proof of concept simulation animation

Author: c.lamboo
Author Date: 2023-12-17 08:48:30 UTC

proof of concept simulation animation

CURA-11464_update_sentry_sdk_python 2023-12-15 11:04:39 UTC
Revert "Revert "Update Sentry to `1.39.1`""

Author: Jelle Spijker
Author Date: 2023-12-15 11:04:39 UTC

Revert "Revert "Update Sentry to `1.39.1`""

This reverts commit 64cb060bd1c2ec23d498c81ea50a55957dfad3e6.

CURA-11440 2023-12-15 07:33:35 UTC
Only copy datas if installed

Author: Jelle Spijker
Author Date: 2023-12-15 07:33:35 UTC

Only copy datas if installed

Contribute to CURA-11440

dependabot/pip/cryptography-41.0.6 2023-12-14 11:15:49 UTC
Bump cryptography from 41.0.1 to 41.0.6

Author: dependabot[bot]
Author Date: 2023-12-14 11:15:49 UTC

Bump cryptography from 41.0.1 to 41.0.6

Bumps [cryptography](https://github.com/pyca/cryptography) from 41.0.1 to 41.0.6.
- [Changelog](https://github.com/pyca/cryptography/blob/main/CHANGELOG.rst)
- [Commits](https://github.com/pyca/cryptography/compare/41.0.1...41.0.6)

---
updated-dependencies:
- dependency-name: cryptography
  dependency-type: direct:production
...

Signed-off-by: dependabot[bot] <support@github.com>

CURA-11080_openssl3 2023-12-14 06:48:47 UTC
Update PyQt6-Network

Author: Jelle Spijker
Author Date: 2023-12-14 06:48:47 UTC

Update PyQt6-Network

PyQt6 <= 6.4 is build and linked against openSSL 1.1.1

Contributes to CURA-11080

CURA-7647-play-simulation-time-dependent 2023-12-12 15:53:34 UTC
removal of magic number

Author: saumya.jain
Author Date: 2023-12-12 15:53:34 UTC

removal of magic number

CURA-7647

dependabot/pip/pyinstaller-5.13.1 2023-12-09 00:48:14 UTC
Bump pyinstaller from 5.8.0 to 5.13.1

Author: dependabot[bot]
Author Date: 2023-12-09 00:48:14 UTC

Bump pyinstaller from 5.8.0 to 5.13.1

Bumps [pyinstaller](https://github.com/pyinstaller/pyinstaller) from 5.8.0 to 5.13.1.
- [Release notes](https://github.com/pyinstaller/pyinstaller/releases)
- [Changelog](https://github.com/pyinstaller/pyinstaller/blob/develop/doc/CHANGES.rst)
- [Commits](https://github.com/pyinstaller/pyinstaller/compare/v5.8.0...v5.13.1)

---
updated-dependencies:
- dependency-name: pyinstaller
  dependency-type: direct:development
...

Signed-off-by: dependabot[bot] <support@github.com>

CURA-11279_fix_arrange_grid 2023-12-06 11:18:22 UTC
Merge branch 'main' into CURA-11279_fix_arrange_grid

Author: Casper Lamboo
Author Date: 2023-12-06 11:18:22 UTC

Merge branch 'main' into CURA-11279_fix_arrange_grid

CURA-11365_fix_msvc_template_fail 2023-12-01 09:49:26 UTC
Fix + unpin dulcificum.

Author: Remco Burema
Author Date: 2023-12-01 09:49:26 UTC

Fix + unpin dulcificum.

part of CURA-11365

PP-363_Fix_broken_definitions 2023-11-29 12:46:32 UTC
Remove redundant overrides

Author: Jaime van Kessel
Author Date: 2023-11-29 12:46:32 UTC

Remove redundant overrides

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>

remove-luts 2023-11-29 11:30:15 UTC
Merge branch 'main' into remove-luts

Author: Casper Lamboo
Author Date: 2023-11-29 11:30:15 UTC

Merge branch 'main' into remove-luts

CURA-11391_Changelog_5.6_Stable 2023-11-28 09:36:45 UTC
Apply suggestions from code review

Author: Mariska
Author Date: 2023-11-28 09:36:45 UTC

Apply suggestions from code review

Based on codereview

Co-authored-by: Casper Lamboo <c.lamboo@ultimaker.com>

PP-395-auto-enable-interlocking 2023-11-22 07:31:01 UTC
Applied printer-linter format

Author: Frederic98
Author Date: 2023-11-22 07:31:01 UTC

Applied printer-linter format

CURA-11077_with_to_hoops 2023-11-17 16:34:59 UTC
CAD files are now uploaded and conversion is started

Author: Erwan MATHIEU
Author Date: 2023-11-17 16:34:59 UTC

CAD files are now uploaded and conversion is started

CURA-11077

PP-399-Shrinkage-compensation-Method-materials 2023-11-14 13:32:42 UTC
- Removed step correction from z shrinkage compensation for the Method X

Author: Paul Kuiper
Author Date: 2023-11-14 13:32:42 UTC

- Removed step correction from z shrinkage compensation for the Method X
- Changed step size tfrom 0.2mm to 0.203mm for Method X
- Added material compensations for ABS-R and ABS-CF
- New resolve formula in fdmprinter.def.json to not use the shrinkage factors of support materials

CURA-11299 2023-11-10 14:21:18 UTC
Fix nozzle selection checkmark

Author: c.lamboo
Author Date: 2023-11-10 14:21:18 UTC

Fix nozzle selection checkmark

CURA-11299

CURA-4666_fix_python_install_info 2023-11-07 16:32:25 UTC
Use `soure_folder` instead of `source_path`

Author: Jelle Spijker
Author Date: 2023-11-07 16:32:25 UTC

Use `soure_folder` instead of `source_path`

`source_path` is `None` at the time we generate the file

CURA-11221-intent-naming-not-consistant 2023-11-06 07:42:47 UTC
intent name translated from intent_translations

Author: saumya.jain
Author Date: 2023-11-06 07:42:47 UTC

intent name translated from intent_translations

CURA-11221

CURA-11225-url-scheme 2023-11-04 11:10:16 UTC
Log on incoming url schemes

Author: c.lamboo
Author Date: 2023-11-03 18:44:52 UTC

Log on incoming url schemes

CURA-11225

Update_Method 2023-11-03 12:32:18 UTC
Merge branch '5.6' into Update_Method

Author: Casper Lamboo
Author Date: 2023-11-03 12:32:18 UTC

Merge branch '5.6' into Update_Method

Makerbot-profiles-update 2023-11-03 10:09:21 UTC
- Disable fan for RapidRinse

Author: Paul Kuiper
Author Date: 2023-11-03 10:09:21 UTC

- Disable fan for RapidRinse
- Set small layer temperature equal to print temperature
- Increased size of the prime tower foot

CURA-11259_improve_prime_tower_settings_desc 2023-11-03 09:56:59 UTC
Refine prime tower new settings descriptions

Author: Erwan MATHIEU
Author Date: 2023-11-03 09:56:59 UTC

Refine prime tower new settings descriptions

CURA-11259

CURA-10561-makerbot-python 2023-10-27 13:40:55 UTC
Merge branch 'main' into CURA-10561-makerbot-python

Author: Remco Burema
Author Date: 2023-10-27 13:40:55 UTC

Merge branch 'main' into CURA-10561-makerbot-python

dependabot/pip/twisted-23.8.0 2023-10-25 21:45:55 UTC
Bump twisted from 21.2.0 to 23.8.0

Author: dependabot[bot]
Author Date: 2023-10-25 21:45:55 UTC

Bump twisted from 21.2.0 to 23.8.0

Bumps [twisted](https://github.com/twisted/twisted) from 21.2.0 to 23.8.0.
- [Release notes](https://github.com/twisted/twisted/releases)
- [Changelog](https://github.com/twisted/twisted/blob/trunk/NEWS.rst)
- [Commits](https://github.com/twisted/twisted/compare/twisted-21.2.0...twisted-23.8.0)

---
updated-dependencies:
- dependency-name: twisted
  dependency-type: direct:production
...

Signed-off-by: dependabot[bot] <support@github.com>

5.5 2023-10-25 09:50:37 UTC
pin fdm_materials to 5.5.0

Author: Jelle Spijker
Author Date: 2023-10-25 09:50:37 UTC

pin fdm_materials to 5.5.0

Contributes to CURA-11218

makerbot-iso-view-renderer 2023-10-23 09:19:28 UTC
Reuse `node_bounds` utility function

Author: c.lamboo
Author Date: 2023-10-23 09:19:28 UTC

Reuse `node_bounds` utility function

CURA-11189-reset-intents 2023-10-20 13:10:39 UTC
Boyscouting

Author: c.lamboo
Author Date: 2023-10-20 13:10:39 UTC

Boyscouting

CURA-11189

CURA-10994_translations_v5p5 2023-10-18 14:46:43 UTC
Fix misplaced translations

Author: Erwan MATHIEU
Author Date: 2023-10-18 14:46:43 UTC

Fix misplaced translations

CURA-10994

dependabot/pip/urllib3-1.26.18 2023-10-17 22:18:19 UTC
Bump urllib3 from 1.25.9 to 1.26.18

Author: dependabot[bot]
Author Date: 2023-10-17 22:18:19 UTC

Bump urllib3 from 1.25.9 to 1.26.18

Bumps [urllib3](https://github.com/urllib3/urllib3) from 1.25.9 to 1.26.18.
- [Release notes](https://github.com/urllib3/urllib3/releases)
- [Changelog](https://github.com/urllib3/urllib3/blob/main/CHANGES.rst)
- [Commits](https://github.com/urllib3/urllib3/compare/1.25.9...1.26.18)

---
updated-dependencies:
- dependency-name: urllib3
  dependency-type: direct:production
...

Signed-off-by: dependabot[bot] <support@github.com>

PPM-profile-updates-petg-abs 2023-10-06 08:35:22 UTC
Merge branch '5.5' into PPM-profile-updates-petg-abs

Author: Saumya Jain
Author Date: 2023-10-06 08:35:22 UTC

Merge branch '5.5' into PPM-profile-updates-petg-abs

CURA-10254-disable-interface-extruders 2023-10-04 11:31:41 UTC
Merge branch '5.5' into CURA-10254-disable-interface-extruders

Author: c.lamboo
Author Date: 2023-10-04 11:31:41 UTC

Merge branch '5.5' into CURA-10254-disable-interface-extruders

# Conflicts:
# resources/definitions/fdmprinter.def.json

CURA-11002_multiplication_tool_tip 2023-09-25 14:39:37 UTC
affects and affected by list fixing

Author: saumya.jain
Author Date: 2023-09-25 14:39:37 UTC

affects and affected by list fixing

CURA-11002

CURA-11051-fix-cura-recommended-mode-crashing 2023-09-25 11:36:36 UTC
Fix cura recommended mode crashing

Author: c.lamboo
Author Date: 2023-09-25 11:36:36 UTC

Fix cura recommended mode crashing

CURA-11051

CURA-11050_switching_printers_for_first_time 2023-09-21 11:59:36 UTC
Merge pull request #16780 from Ultimaker/PP-245-profile-tweaks

Author: Jelle Spijker
Author Date: 2023-09-21 11:59:36 UTC

Merge pull request #16780 from Ultimaker/PP-245-profile-tweaks

Bug fixes profiles

CURA-10993_simple_prime_tower_raft 2023-09-20 16:40:29 UTC
Merge pull request #16776 from Ultimaker/CURA-11038_bundled_plugin_executable...

Author: Casper Lamboo
Author Date: 2023-09-20 16:40:29 UTC

Merge pull request #16776 from Ultimaker/CURA-11038_bundled_plugin_executable_macos

CURA 11038 bundled plugin executable macos

CURA-11029_appimage_include_bundled_plugins 2023-09-15 11:13:23 UTC
Get abstract color property from metadata not from properties

Author: Jaime van Kessel
Author Date: 2023-09-15 11:13:23 UTC

Get abstract color property from metadata not from properties

Otherwise all the abstract profiles are visible

CURA-10953

revert-15943-PP-350_cleanup_print_temperature 2023-09-12 10:52:11 UTC
Revert "PP-350 cleanup print temperature"

Author: Saumya Jain
Author Date: 2023-09-12 10:52:11 UTC

Revert "PP-350 cleanup print temperature"

CURA-10870_multimonitor_workarounds 2023-09-07 08:51:34 UTC
Prevent non-'hard' crashes from re-setting the window-positions.

Author: Remco Burema
Author Date: 2023-09-07 08:51:34 UTC

Prevent non-'hard' crashes from re-setting the window-positions.

part of CURA-10870

CURA-10942_postp_limit_xy_jerk 2023-09-06 19:17:15 UTC
Pass 'all' exceptions.

Author: Remco Burema
Author Date: 2023-09-06 19:17:15 UTC

Pass 'all' exceptions.

part of CURA-10942

PP-245-high-speed-profiles 2023-09-01 18:32:43 UTC
Added extra speeds and accelerations for prime towers, irioning and self supp...

Author: Paul Kuiper
Author Date: 2023-09-01 18:32:43 UTC

Added extra speeds and accelerations for prime towers, irioning and self support interface layer.

PP-245

CURA-10835_make_setting_hidden_icon 2023-09-01 09:12:50 UTC
Few minor fixes

Author: saumya.jain
Author Date: 2023-09-01 09:12:50 UTC

Few minor fixes

CURA-10835

fill_ipv6_local_printer 2023-08-31 11:11:08 UTC
Aparently IPv6 needs more than just ':'

Author: Remco Burema
Author Date: 2023-08-31 11:11:08 UTC

Aparently IPv6 needs more than just ':'

part of the IPv6 'epic'.

detached 2023-08-24 09:38:28 UTC
ctrl+z for grid

Author: saumya.jain
Author Date: 2023-08-24 09:38:28 UTC

ctrl+z for grid

CURA-7951

support_brand_specific_generic 2023-08-15 11:11:00 UTC
Insert "generic color same brand" logic for qualities

Author: Jaime van Kessel
Author Date: 2023-08-15 11:11:00 UTC

Insert "generic color same brand" logic for qualities

So instead of always falling back to generic brand and generic color,
we first try to fall back to generic color with the same brand for qualities

CURA-10581 2023-08-10 14:55:41 UTC
Change workspace dialog so it has an enormous amount of icons

Author: c.lamboo
Author Date: 2023-08-10 14:55:41 UTC

Change workspace dialog so it has an enormous amount of icons

CURA-10581

CURA-10670_reenable_small_skin_area 2023-08-10 08:07:17 UTC
Applied printer-linter format

Author: saumyaj3
Author Date: 2023-08-10 08:07:17 UTC

Applied printer-linter format

engi 2023-08-09 21:46:01 UTC
Update README.md

Author: Jelle Spijker
Author Date: 2023-08-09 21:46:01 UTC

Update README.md

10770 2023-08-08 11:54:17 UTC
Merge pull request #16423 from Ultimaker/CURA-10770_Developer_about_dialog

Author: Saumya Jain
Author Date: 2023-08-08 11:54:17 UTC

Merge pull request #16423 from Ultimaker/CURA-10770_Developer_about_dialog

from deploy field.

revert-15470-main 2023-08-02 14:21:19 UTC
Revert " Creat new machine named Renkforce 10+"

Author: Mariska
Author Date: 2023-08-02 14:21:19 UTC

Revert " Creat new machine named Renkforce 10+"

CURA-10778_Add_Support_Type_To_Basic 2023-07-18 10:06:26 UTC
Add Support Structure to Basic

Author: MariMakes
Author Date: 2023-07-18 10:06:26 UTC

Add Support Structure to Basic

We show this setting in recommended, so it's safe to say we can show it in basic.

exception_handler_scroll_to_end 2023-07-17 10:55:52 UTC
Automatically scroll down in crash handler

Author: Jaime van Kessel
Author Date: 2023-07-17 10:55:52 UTC

Automatically scroll down in crash handler

It was reaaaaaly annoying me that people would post screenshots all the time.
Those screenshots would never include the info you need, because it would only
capture the top of the exception / logs.

PP-356_Create_material-max-flowrate_setting 2023-07-13 10:58:42 UTC
Use material_max_flowrate for speed_print value warning

Author: Frederic Meeuwissen
Author Date: 2023-07-13 10:58:42 UTC

Use material_max_flowrate for speed_print value warning

1100 of 229 results
This repository contains Public information 
Everyone can see this information.

Subscribers

No subscribers.