Get this repository:
git clone https://git.launchpad.net/cura

Branches

Name Last Modified Last Commit
master 2020-10-27 13:42:38 UTC 4 hours ago
Merge branch '4.8'

Author: Kostas Karmas
Author Date: 2020-10-27 13:42:38 UTC

Merge branch '4.8'

4.8 2020-10-27 13:40:34 UTC 4 hours ago
Merge pull request #8633 from Ultimaker/CURA-7796_fix_merge_models

Author: Konstantinos Karmas
Author Date: 2020-10-27 13:40:34 UTC

Merge pull request #8633 from Ultimaker/CURA-7796_fix_merge_models

Reset the entire transformation when merging

libArachne_rebased 2020-10-26 15:24:52 UTC 2020-10-26
Reduce minimum value and default value for minimum line width

Author: Ruben D
Author Date: 2020-10-26 15:24:52 UTC

Reduce minimum value and default value for minimum line width

The previous minimum value was based on anecdotal experience about what the minimum width is that a printer can normally print. That's better as a default value and shouldn't be used as a minimum value.
The minimum value should be based on what the technical or physical limitations are. There are no real technical or physical limitations other than that you can't have 0-width lines. So the minimum is just-above-0.

Contributes to issue CURA-7682.

CURA-7682_Print_thin_walls_in_libArachne 2020-10-26 14:39:47 UTC 2020-10-26
Merge branch 'libArachne_rebased' into CURA-7682_Print_thin_walls_in_libArachne

Author: Ruben D
Author Date: 2020-10-26 14:39:47 UTC

Merge branch 'libArachne_rebased' into CURA-7682_Print_thin_walls_in_libArachne

CURA-7795_Up_SDK_Version_to_7.4.0 2020-10-22 09:29:25 UTC 2020-10-22
Up the SDK version to 7.4.0

Author: Kostas Karmas
Author Date: 2020-10-22 09:29:25 UTC

Up the SDK version to 7.4.0

In preparation for release of the 4.8.

CURA-7795

version_upgrade_4.9 2020-10-20 15:34:11 UTC 2020-10-20
Bump setting_version to 17

Author: Ruben D
Author Date: 2020-10-20 15:34:11 UTC

Bump setting_version to 17

This is a necessary evil to be able to upgrade people's global stacks with the updates to the DisplayProgressOnLCD post-processing script.

Contributes to issue CURA-7787.

CURA-7501_no_double_adding_extruders 2020-10-16 14:09:37 UTC 2020-10-16
Prevent duplicate adding of extruders

Author: Ruben D
Author Date: 2020-10-16 14:09:37 UTC

Prevent duplicate adding of extruders

The addMachineExtruders function assumes that this is a new printer (first time the printer is activated since a restart of Cura) and it needs to add the extruder stacks to it. However most of the time when we're switching, it's not to a new printer. If it's not a new printer, this function would get called anyway and we'd be adding the extruders multiple times. This then does a lot of unnecessary work and eventually fails a couple of calls deep.
This change prevents it from adding the extruders if there are already extruders associated with the printer, thus preventing this unnecessary work (switch is faster) and preventing the error from happening.

Discovered during work on CURA-7501.

CURA-7501_fix_warning_preloaded_plugins 2020-10-16 11:09:41 UTC 2020-10-16
Add ConsoleLogger as pre-loaded plug-in

Author: Ruben D
Author Date: 2020-10-16 11:09:41 UTC

Add ConsoleLogger as pre-loaded plug-in

This way it gets loaded only once on start-up, which prevents errors that the plug-in was already loaded.

Contributes to issue CURA-7501.

CURA-7776_Slicing_not_possible_when_objects_overlap_outside_buildplate_in_oneAtATime 2020-10-14 15:14:38 UTC 2020-10-14
Exclude objects outside buildplate from OneAtATimeIterator

Author: Kostas Karmas
Author Date: 2020-10-14 15:14:38 UTC

Exclude objects outside buildplate from OneAtATimeIterator

CURA-7776

CURA-7745-fix-montior-page-hacks 2020-10-12 09:06:49 UTC 2020-10-12
Simplify the printer state display

Author: Jaime van Kessel
Author Date: 2020-10-12 09:06:49 UTC

Simplify the printer state display

CURA-7745

4.6 2020-10-06 12:47:34 UTC 2020-10-06
Merge pull request #8499 from Ultimaker/CURA-7735_Disable_symlink_following_f...

Author: Remco Burema
Author Date: 2020-10-06 12:47:34 UTC

Merge pull request #8499 from Ultimaker/CURA-7735_Disable_symlink_following_for_non_debug_mode_in_Trust

CURA-7735: Make symlink following optional when checking the plugin signatures

CURA-7735_Disable_symlink_following_for_non_debug_mode_in_Trust 2020-10-05 14:34:20 UTC 2020-10-05
Follow symlinks when checking plugin signatures only in DEBUG mode

Author: Kostas Karmas
Author Date: 2020-10-05 14:34:20 UTC

Follow symlinks when checking plugin signatures only in DEBUG mode

CURA-7735

CURA-7644_Refactor_ThreeMFWorkspaceReader 2020-10-02 14:57:21 UTC 2020-10-02
Check for updatable machines after the machine_definition_id changes

Author: Kostas Karmas
Author Date: 2020-10-02 14:57:21 UTC

Check for updatable machines after the machine_definition_id changes

So that we can account for the issue with the Dagoma printers (CURA-7517), which when they were
updated, the dagoma_discoeasy200 (dual extruder) was renamed to dagoma_discoeasy200_bicolor
and the dagoma_discoeasy200 became single extrusion. In this case, the project files created
before 4.6 should look for the dual extrusion dagomas (dagoma_discoeasy200_bicolor).

CURA-7644

fix_filtering_output_mimetypes 2020-09-28 09:56:54 UTC 2020-09-28
Use canonical MIME type for STL files

Author: Ruben D
Author Date: 2020-09-28 09:56:54 UTC

Use canonical MIME type for STL files

This is the canonical MIME type for STL files since March 2018: https://www.iana.org/assignments/media-types/model/stl
There is no longer a difference between the MIME type of binary vs. ASCII STL files now.

CURA-7691_Unclear_why_imported_profile_is_not_immediately_visible 2020-09-16 06:26:41 UTC 2020-09-16
Show warning icon on import non-visible profile.

Author: Remco Burema
Author Date: 2020-09-16 06:26:41 UTC

Show warning icon on import non-visible profile.

part of CURA-7691

CURA-7716_DigitalFactoryURL_option 2020-09-14 14:03:46 UTC 2020-09-14
Remove the opening of the digital factory URL in cases where the user has alr...

Author: Evangelos Trantos
Author Date: 2020-09-14 14:03:46 UTC

Remove the opening of the digital factory URL in cases where the user has already signed in.

This will eliminate confusion whenever a staging environment will be used.

CURA-7676_reenable_outer_inner_wall_widths 2020-09-11 14:48:46 UTC 2020-09-11
Set inward-distributed to be the default arachne strategy.

Author: Remco Burema
Author Date: 2020-09-11 14:48:46 UTC

Set inward-distributed to be the default arachne strategy.

part of CURA-7676

CURA-7118_shrinkage_compensation 2020-09-09 07:51:45 UTC 2020-09-09
Fix failing tests

Author: Kostas Karmas
Author Date: 2020-09-09 07:51:45 UTC

Fix failing tests

A printer was added in the meantime that had setting_version = 15, which was leading to failing
tests, considering that this PR has changed the setting version to 16.

CURA-7118

fix_pause_for_relative 2020-09-06 20:11:18 UTC 2020-09-06
Don't use full-width unicode percent as placeholder in zh_CN locale.

Author: Remco Burema
Author Date: 2020-09-06 20:11:18 UTC

Don't use full-width unicode percent as placeholder in zh_CN locale.

Fixes #8322

fix_grouping_below_build_plate 2020-09-02 12:19:38 UTC 2020-09-02
Don't mark children nodes in a group below the buildplate

Author: Jaime van Kessel
Author Date: 2020-09-02 12:19:38 UTC

Don't mark children nodes in a group below the buildplate

Fixes #8268

4.7 2020-09-01 11:01:45 UTC 2020-09-01
Add change log entry for Cura 4.7.1

Author: Ruben D
Author Date: 2020-09-01 11:01:45 UTC

Add change log entry for Cura 4.7.1

And make links clickable there.

Contributes to issue CURA-7658.

CURA-7376_full_of_spiders 2020-08-13 14:53:17 UTC 2020-08-13
Merge branch 'master' into CURA-7376_full_of_spiders

Author: Kostas Karmas
Author Date: 2020-08-13 14:53:17 UTC

Merge branch 'master' into CURA-7376_full_of_spiders

alternate_wall_direction 2020-08-12 07:30:50 UTC 2020-08-12
setting alternate_wall_direction

Author: Tim Kuipers
Author Date: 2020-05-04 10:02:21 UTC

setting alternate_wall_direction

CURA-7646_Settings_not_applied_when_creating_new_CFFF_from_project_file 2020-08-11 10:37:34 UTC 2020-08-11
Document possible theoretical issue when loading a project file

Author: Kostas Karmas
Author Date: 2020-08-11 10:37:34 UTC

Document possible theoretical issue when loading a project file

The issue will happen only if the machine_extruder_count is a formula.
In this case, the project loading will not work properly if "Create new" printer is selected,
as the settings of all extruders but the first one will not be applied.
Workaround in this case will be to load the project again and select to update the existing
printer, in which case all settings will load properly.

CURA-7646

CURA-6684_Ignore_extra_skin_wall_count_in_concentric 2020-07-13 11:41:11 UTC 2020-07-13
Hide "Extra Skin Wall Count" if roofing pattern is also concentric

Author: Kostas Karmas
Author Date: 2020-07-13 11:41:11 UTC

Hide "Extra Skin Wall Count" if roofing pattern is also concentric

Now the ESWC will disappear if:
 * the "Top/Bottom Pattern" is Concentric
 * AND the "Bottom Pattern Initial Layer" is Concentric
 * AND there are top surface skin layers and the roofing pattern is Concentric

CURA-6684

experiment_monitor_in_browser 2020-06-22 14:10:27 UTC 2020-06-22
Use Digital Factory root URL from environment

Author: ChrisTerBeke
Author Date: 2020-06-22 14:10:27 UTC

Use Digital Factory root URL from environment

CURA-7509_plugin_versions_on_crash 2020-06-18 07:13:28 UTC 2020-06-18
Merge branch 'master' into CURA-7509_plugin_versions_on_crash

Author: Kostas Karmas
Author Date: 2020-06-18 07:13:28 UTC

Merge branch 'master' into CURA-7509_plugin_versions_on_crash

CURA-7418-update-profile-window 2020-06-17 13:34:13 UTC 2020-06-17
Change copy of "Your are in sync with your account"

Author: Nino van Hooff
Author Date: 2020-06-17 13:34:13 UTC

Change copy of "Your are in sync with your account"
to "Account synced"

Don't think the duplication I found is necessary, but I don't dare to
deduplicate it as I found some logic inconsistencies

CURA-7418

CURA-7437_no_internet_cloud_bugs 2020-06-10 07:53:00 UTC 2020-06-10
Restore lost comment

Author: Nino van Hooff
Author Date: 2020-06-10 07:53:00 UTC

Restore lost comment

CURA-7437

feat_min_supporting_model_area 2020-05-29 13:36:40 UTC 2020-05-29
Add Minimum Supporting Part Area to expert-level settings

Author: Ruben D
Author Date: 2020-05-29 13:36:40 UTC

Add Minimum Supporting Part Area to expert-level settings

Contributes to issue CURA-7475.

CURA-7240_split_bundled_unbundled_marketplace 2020-03-31 13:46:32 UTC 2020-03-31
Fix marketplace installed plugins/materials empty rectangle.

Author: Remco Burema
Author Date: 2020-03-31 13:46:32 UTC

Fix marketplace installed plugins/materials empty rectangle.

part of CURA-7240

back_pressure_compensation 2020-03-04 15:28:59 UTC 2020-03-04
introduce setting speed_equalize_flow_width_factor

Author: Tim Kuipers
Author Date: 2020-03-04 15:28:59 UTC

introduce setting speed_equalize_flow_width_factor

CURA-7279

4.5 2020-02-25 15:16:45 UTC 2020-02-25
Fix layout of 4.5 change log

Author: Ruben D
Author Date: 2020-02-25 15:16:45 UTC

Fix layout of 4.5 change log

Contributes to issue CURA-7250.

osx_crash_fixes 2020-02-24 12:07:59 UTC 2020-02-24
Revert speedup

Author: Jaime van Kessel
Author Date: 2020-02-24 11:47:11 UTC

Revert speedup

raft_line_direction_hack 2020-02-19 11:03:10 UTC 2020-02-19
Added line directions for raft setting.

Author: Remco Burema
Author Date: 2020-02-19 11:03:10 UTC

Added line directions for raft setting.

Not part of any story, custom hack for research.

CURA-7155_confusing_license_dialog_page_count 2020-01-30 15:42:42 UTC 2020-01-30
Count the number of packages which have a license to display

Author: Nino van Hooff
Author Date: 2020-01-30 15:42:42 UTC

Count the number of packages which have a license to display

CURA-7155

tooling_doxygen_2_rst 2020-01-27 13:50:59 UTC 2020-01-27
Dox 2 Rst: Move from Cura to Uranium

Author: Nino van Hooff
Author Date: 2020-01-27 13:50:59 UTC

Dox 2 Rst: Move from Cura to Uranium

CURA-7072-temp 2020-01-23 14:00:54 UTC 2020-01-23
Added printer compatibility

Author: Dimitriovski
Author Date: 2020-01-23 14:00:54 UTC

Added printer compatibility

test_winbuild_qt5.14 2020-01-09 14:24:55 UTC 2020-01-09
Wincrash chase: Play it safe, add these smartavionics suggestions for the app...

Author: Remco Burema
Author Date: 2020-01-09 14:24:55 UTC

Wincrash chase: Play it safe, add these smartavionics suggestions for the app as well.

CURA-6968_Meaterial_volume_between_wipes_setting_fix 2020-01-09 14:06:58 UTC 2020-01-09
Change description of nozzle wipes settings

Author: Kostas Karmas
Author Date: 2020-01-09 14:06:10 UTC

Change description of nozzle wipes settings

CURA-6968

controls2_scrollbars 2020-01-08 15:35:56 UTC 2020-01-08
Merge branch 'master' of github.com:Ultimaker/Cura into controls2_scrollbars

Author: Dimitriovski
Author Date: 2020-01-08 15:35:56 UTC

Merge branch 'master' of github.com:Ultimaker/Cura into controls2_scrollbars

4.4 2019-12-23 09:52:51 UTC 2019-12-23
Add change log entry for 4.4.1

Author: Ruben D
Author Date: 2019-12-23 09:52:51 UTC

Add change log entry for 4.4.1

Contributes to issue CURA-7047.

variant_node_material_removed_testcase 2019-12-23 08:42:47 UTC 2019-12-23
wip: variant node material removed testcase

Author: Nino van Hooff
Author Date: 2019-12-23 08:42:47 UTC

wip: variant node material removed testcase

4.3 2019-09-24 12:37:31 UTC 2019-09-24
Merge pull request #6398 from Ultimaker/CURA-6768_4.3_translations_lionbridge

Author: Jaime van Kessel
Author Date: 2019-09-24 12:37:31 UTC

Merge pull request #6398 from Ultimaker/CURA-6768_4.3_translations_lionbridge

Update translations for Cura 4.3 from Lionbridge

per_object_settings_controls2 2019-08-02 12:26:40 UTC 2019-08-02
Change the panel to use controls 2

Author: Diego Prado Gesto
Author Date: 2019-08-02 12:26:40 UTC

Change the panel to use controls 2

Using the reusable components

4.2 2019-07-31 12:34:07 UTC 2019-07-31
Remove debugging statements

Author: Ruben D
Author Date: 2019-07-31 12:34:07 UTC

Remove debugging statements

Contributes to issue CURA-6696.

4.1 2019-05-28 09:59:17 UTC 2019-05-28
Fix manual output devices not being added on boot

Author: Jaime van Kessel
Author Date: 2019-05-28 09:59:17 UTC

Fix manual output devices not being added on boot

4.0 2019-03-21 08:35:51 UTC 2019-03-21
Remove duplicate shortcut in Polish

Author: Diego Prado Gesto
Author Date: 2019-03-21 08:35:51 UTC

Remove duplicate shortcut in Polish

Contributes to CURA-6257.

feature_click_and_place 2019-03-03 16:52:01 UTC 2019-03-03
Add some print outs

Author: Diego Prado Gesto
Author Date: 2019-03-03 16:52:01 UTC

Add some print outs

extend_eraser_to_bottom 2019-01-18 19:11:11 UTC 2019-01-18
Extend the created eraser cube to the buildplate

Author: Diego Prado Gesto
Author Date: 2019-01-18 19:11:11 UTC

Extend the created eraser cube to the buildplate

For the user it gives more feedback about what the eraser is going to delete.

3.6 2018-11-12 14:47:42 UTC 2018-11-12
Disable Polish language

Author: Ruben D
Author Date: 2018-11-12 14:47:21 UTC

Disable Polish language

The translation didn't arrive in time for the 3.6 release.

Contributes to issue CURA-5870.

3.5 2018-10-15 12:00:47 UTC 2018-10-15
Correct some printers to use 1.75mm filament

Author: Ruben D
Author Date: 2018-10-15 11:55:47 UTC

Correct some printers to use 1.75mm filament

This should fix some underextrusion problems... Hmm.

Sources:
* https://alya3dp.com/pages/teknik-ozellikler
* https://www.creality3d.cn/creality-cr-10-s4-3d-printer-p00098p1.html
* https://www.creality3d.cn/creality-cr-10-s5-3d-printer-p00099p1.html
* https://3dprint.com/3643/german-repraps-neo-3d-printer-now-available-in-the-us-uk/
* https://somosmaker.com/pegasus-impresora-3d/
* http://www.3dmaker.vn/3d-printer-3dmaker-starter/?lang=en# (assuming the filaments they sell on that website are compatible)
* https://makezine.com/product-review/printrbot-play/

I could not find a source for the Deltabot, but got that information from here: https://github.com/Ultimaker/Cura/issues/4573

Contributes to issue CURA-5817.

feature_print_time_estimation 2018-09-06 16:34:17 UTC 2018-09-06
Merge branch 'master' into feature_print_time_estimation

Author: Diego Prado Gesto
Author Date: 2018-09-06 16:34:17 UTC

Merge branch 'master' into feature_print_time_estimation

feature_texture_processing 2018-07-26 08:08:57 UTC 2018-07-26
JSON: texture processing settings

Author: Tim Kuipers
Author Date: 2018-07-26 08:08:53 UTC

JSON: texture processing settings

3.4 2018-07-10 10:03:59 UTC 2018-07-10
Update change log for Cura 3.4.1

Author: Ruben D
Author Date: 2018-07-10 10:03:59 UTC

Update change log for Cura 3.4.1

feature_custom_support 2018-06-28 09:07:31 UTC 2018-06-28
Don't draw endcap if we don't have a pen any more

Author: Ruben D
Author Date: 2018-06-28 09:07:31 UTC

Don't draw endcap if we don't have a pen any more

If Python lags behind and there are multiple mouse release events processed after each other without mouse press events, then it would crash. No longer.

Contributes to issue CURA-5482.

gcode-model 2018-06-27 11:38:02 UTC 2018-06-27
Trying out stuff with openscad and fusion 360

Author: Jack Ha
Author Date: 2018-06-27 11:38:02 UTC

Trying out stuff with openscad and fusion 360

3.3 2018-05-24 12:08:52 UTC 2018-05-24
Merge pull request #3691 from ohrn/usb-gcode-check

Author: Chris ter Beke
Author Date: 2018-05-24 12:08:52 UTC

Merge pull request #3691 from ohrn/usb-gcode-check

Only open USB ports if the printer understands gcode.

3.2 2018-02-19 12:11:00 UTC 2018-02-19
Merge pull request #3325 from fieldOfView/feature_early_crash_config_folder_b...

Author: Mark
Author Date: 2018-02-19 12:11:00 UTC

Merge pull request #3325 from fieldOfView/feature_early_crash_config_folder_button

Add a button to open the configuration folder.

step_file_reader 2018-02-14 13:14:02 UTC 2018-02-14
Added plugin for reading cad files with .step file extension

Author: Aleksei S
Author Date: 2018-02-14 13:14:02 UTC

Added plugin for reading cad files with .step file extension
CURA-4891

feature_simulation_view_position_info 2018-01-21 18:00:19 UTC 2018-01-21
Add labels for position and feedrate

Author: Diego Prado Gesto
Author Date: 2018-01-21 18:00:19 UTC

Add labels for position and feedrate

3.1 2017-12-21 14:59:00 UTC 2017-12-21
Add Fedora to test for nvidia driver work around.

Author: Andrew Donaldson
Author Date: 2017-12-04 10:16:30 UTC

Add Fedora to test for nvidia driver work around.

CURA-4572_Space_Mouse 2017-11-15 14:50:47 UTC 2017-11-15
Initial version for Space Mouse, win and linux, only x,y,z

Author: Aleksei Sasin
Author Date: 2017-11-15 14:50:47 UTC

Initial version for Space Mouse, win and linux, only x,y,z

CURA-4572

3.0 2017-10-31 10:47:55 UTC 2017-10-31
CURA-4502 Minor changes

Author: Diego Prado Gesto
Author Date: 2017-10-31 10:47:55 UTC

CURA-4502 Minor changes

2.7 2017-08-29 13:27:10 UTC 2017-08-29
Enable prime tower for CPE+ 0.8 Fast Print

Author: Ruben D
Author Date: 2017-08-29 13:27:10 UTC

Enable prime tower for CPE+ 0.8 Fast Print

The prime tower is enabled for the other two quality profiles but not for this one, so we're making this consistent (with confirmation from the Materials team).

2.6 2017-06-27 14:41:58 UTC 2017-06-27
Rename other quality profiles to old not-supported names

Author: Ruben D
Author Date: 2017-06-27 14:41:58 UTC

Rename other quality profiles to old not-supported names

The Superdraft quality was sometimes still active in users' old configuration as well.

Contributes to issue CURA-3973.

2.5 2017-04-21 11:30:29 UTC 2017-04-21
Revert "Drop in experimental profiles for external testing"

Author: Ruben D
Author Date: 2017-04-21 11:30:29 UTC

Revert "Drop in experimental profiles for external testing"

This reverts commit 1feaace2859dbf2e73fe34705ba58b53b5814896.

2.4 2017-02-10 17:11:49 UTC 2017-02-10
Merge branch '2.4' of github.com:Ultimaker/Cura into 2.4

Author: Ruben D
Author Date: 2017-02-10 17:11:49 UTC

Merge branch '2.4' of github.com:Ultimaker/Cura into 2.4

2.3 2016-11-04 13:24:43 UTC 2016-11-04
Blur focus upon changing profiles, material, variant, etc.

Author: Ruben D
Author Date: 2016-11-04 13:24:43 UTC

Blur focus upon changing profiles, material, variant, etc.

Otherwise the currently focussed setting gets taken along to after the switch.

2.1 2016-08-18 15:41:03 UTC 2016-08-18
Revert "Remove superfluous M140 command"

Author: fieldOfView
Author Date: 2016-08-18 15:41:03 UTC

Revert "Remove superfluous M140 command"

This reverts commit 63905d80eff741bb7113cb598432935362dbeb0b.
M104 != M140

170 of 70 results

Other repositories

Name Last Modified
lp:cura 3 hours ago
lp:~thopiekar/cura/+git/cura-thopiekar 2020-02-22
12 of 2 results
You can't create new repositories for Cura.