lp:~xnox/ubuntu/precise/mdadm/precise

Branch merges

Propose for merging

No branches dependent on this one.

Related source package recipes

No recipes using this branch. (?)

Create packaging recipe

Related snap packages

Related bugs

Bug #920324: Please merge mdadm 3.2.3-2 from Debian unstable (main) (multiple regressions)

High

Fix Released

Link a bug report

Related blueprints

63. By Clint Byrum on 2012-02-09

* Merge from Debian testing. (LP: #920324) Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - Build udeb with -O2 on ppc64, working around a link error.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).

62. By Clint Byrum on 2011-12-16

* Merge from debian unstable. Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - Build udeb with -O2 on ppc64, working around a link error.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).
* Disabling -fno-strict-aliasing as according to debian bug 375876 it
  has been unnecessary since mdadm 2.5.2
* Dropped changes:
  - applied upstream
  - d/rules: fix FTBFS by adding -Wno-unused-but-set-variable to
    compiler flags until upstream solves the issue. (fixed upstream)
  - d/control: add dependency on initscripts >= 2.88dsf-13.3 to ensure
    /run exists per http://wiki.debian.org/ReleaseGoals/RunDirectory
    (change also done in debian)
* d/rules: add 'man' to build mdadm.8

61. By Clint Byrum on 2011-08-24

* d/initramfs/mdadm-functions: Record in /run when boot-degraded
  question has been asked so that it is only asked once (LP: #820111)
* d/control: add dependency on initscripts >= 2.88dsf-13.3 to ensure
  /run exists per http://wiki.debian.org/ReleaseGoals/RunDirectory
* d/rules: fix FTBFS by adding -Wno-unused-but-set-variable to
  compiler flags until upstream solves the issue. (LP: #829463)

60. By Clint Byrum on 2011-05-24

Call checks in local-premount to avoid race condition with udev
and opening a degraded array. (LP: #778520)

59. By Clint Byrum on 2011-04-27

pass --test to mdadm to enable result codes for degraded arrays.
(LP: #761971)

58. By Surbhi Palande on 2011-03-23

mdadm udev rule incrementally adds mdadm member when detected. Starting
such an array in degraded mode is possible by mdadm -IRs. Using mdadm -ARs
without stopping the array first does nothing when no mdarray-unassociated
device is available. Using mdadm -IRs to start a previously partially
assembled array through incremental mode. Keeping the mdadm -ARs for
assembling arrays which were for some reason not assembled through
incremental mode (i.e through mdadm's udev rule). (LP: #728435)

57. By Matthias Klose on 2011-02-20

Build udeb with -O2 on ppc64, working around a link error.

56. By Kees Cook on 2011-01-05

debian/mdadm.manpages: add manpages back to build (LP: #697821).

55. By Surbhi Palande on 2010-09-30

* Merge from debian unstable. (LP: #603582)
* Remaining changes
  - Assemble.c, config.c: upgraded to the mdadm-3.1.4 version of these files
    from Debian.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/rules: kept debian's switch to using dh_lintian
  - debian/mdadm.links, debian/mdadm.manpages: dropped owing to the fact
    that these are not used in Ubuntu. Also dropped the build-dep on docbook
    to man)
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntus version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name

54. By Surbhi Palande on 2010-09-13

* debian/initramfs/hook: Added following code (invoked on update-initramfs)
  (LP: #617725):
  - create a mdadm.conf if it is not found in /etc and copy it in initramfs
  - update an existing mdadm.conf in the initramfs if it does'nt include
    a definition of any array
  - warn the user if the definition of an active array is not found in the
    initramfs/etc/mdadm.conf