lp:~ultimaker/ultimaker/+git/fdm_materials

Owned by Ultimaker
Get this repository:
git clone https://git.launchpad.net/~ultimaker/ultimaker/+git/fdm_materials

Import details

Import Status: Reviewed

This repository is an import of the Git repository at https://github.com/Ultimaker/fdm_materials.git.

The next import is scheduled to run in 4 hours.

Last successful import was 1 hour ago.

Import started 1 hour ago on alnitak and finished 1 hour ago taking 1 minute — see the log
Import started 8 hours ago on alnitak and finished 8 hours ago taking 1 minute — see the log
Import started 15 hours ago on alnitak and finished 15 hours ago taking 1 minute — see the log
Import started 21 hours ago on alnitak and finished 21 hours ago taking 2 minutes — see the log
Import started on 2019-09-17 on alnitak and finished on 2019-09-17 taking 1 minute — see the log
Import started on 2019-09-17 on alnitak and finished on 2019-09-17 taking 1 minute — see the log
Import started on 2019-09-17 on alnitak and finished on 2019-09-17 taking 1 minute — see the log
Import started on 2019-09-17 on alnitak and finished on 2019-09-17 taking 1 minute — see the log
Import started on 2019-09-16 on alnitak and finished on 2019-09-16 taking 1 minute — see the log
Import started on 2019-09-16 on alnitak and finished on 2019-09-16 taking 2 minutes — see the log

Branches

Name Last Modified Last Commit
master 2019-09-17 07:02:06 UTC 2019-09-17
Merge pull request #101 from Ultimaker/ST-2861-break-speeds

Author: Robin den Hertog
Author Date: 2019-09-17 07:02:06 UTC

Merge pull request #101 from Ultimaker/ST-2861-break-speeds

ST-2861: set all break speeds to 25 mm/s

CS-253-automatic-build 2019-09-04 09:48:12 UTC 2019-09-04
Check return value of command

Author: Rick van den Hof
Author Date: 2019-09-04 09:48:12 UTC

Check return value of command

4.3 2019-09-03 16:04:14 UTC 2019-09-03
Merge pull request #100 from Ultimaker/sync_fdm_materials_private

Author: Remco Burema
Author Date: 2019-09-03 16:04:14 UTC

Merge pull request #100 from Ultimaker/sync_fdm_materials_private

Sync from fdm_materials_private

4.2 2019-07-17 14:57:53 UTC 2019-07-17
Update build volume temperature

Author: StijnArntz
Author Date: 2019-07-17 14:38:57 UTC

Update build volume temperature

Updated build volume temperature for
PVA, CFFPA, CFFCPE, GFFPA, GFFCPE

4.1 2019-05-14 13:22:03 UTC 2019-05-14
Merge pull request #80 from Ultimaker/build_volume_temperatures

Author: Lipu Fei
Author Date: 2019-05-14 13:22:03 UTC

Merge pull request #80 from Ultimaker/build_volume_temperatures

Add values for the build volume temperature

new_deprime 2019-04-26 11:04:15 UTC 2019-04-26
Added ABS material settings

Author: Robin den Hertog
Author Date: 2019-04-26 11:04:15 UTC

Added ABS material settings

seems they were missing earlier

4.0 2019-03-26 14:33:21 UTC 2019-03-26
Merge pull request #76 from Ultimaker/CURA-6089_hide_materials

Author: ckielstra
Author Date: 2019-03-26 14:30:50 UTC

Merge pull request #76 from Ultimaker/CURA-6089_hide_materials

Remove UM3 and UM3Ext for CFF and GFF materials

afinkle-master 2019-03-05 14:27:42 UTC 2019-03-05
Make structur3d silicone incompatible with all except Structur3D

Author: Ruben D
Author Date: 2019-03-05 14:27:42 UTC

Make structur3d silicone incompatible with all except Structur3D

Contributes to issue CURA-6262.

CURA-5839_cc06 2018-10-30 09:59:04 UTC 2018-10-30
Add CC 0.6 for S5

Author: Lipu Fei
Author Date: 2018-10-30 09:49:28 UTC

Add CC 0.6 for S5

CURA-5839

feature_remove_exclude_materials 2018-07-10 08:35:52 UTC 2018-07-10
List materials as incompatible with printers that previously excluded them

Author: Ruben D
Author Date: 2018-07-10 08:35:52 UTC

List materials as incompatible with printers that previously excluded them

These should not be available for UM2 and UMO and HIPS and PETG should not be available for any UM printers.

Contributes to issue CURA-5460.

CURA-5460_remove_exclude_materials 2018-06-13 06:20:58 UTC 2018-06-13
Update hardware compatibility for HIPS, PETG, PVA, and tough PLA

Author: Lipu Fei
Author Date: 2018-06-13 06:20:56 UTC

Update hardware compatibility for HIPS, PETG, PVA, and tough PLA

CURA-5460

EM-1333-ulticast 2017-07-28 13:02:38 UTC 2017-07-28
Added ulticast proto

Author: Robin den Hertog
Author Date: 2017-07-28 13:02:38 UTC

Added ulticast proto

Signed-off-by: Robin den Hertog <r.denhertog@ultimaker.com>

EM-1736 2017-07-17 07:33:00 UTC 2017-07-17
Close HTML file after writing.

Author: Coen Schalkwijk
Author Date: 2017-07-17 07:33:00 UTC

Close HTML file after writing.
EM-1736

feature/html_page_generating_scripts 2017-07-14 08:25:11 UTC 2017-07-14
Applied review comments

Author: Coen Schalkwijk
Author Date: 2017-07-14 08:25:11 UTC

Applied review comments

EM-1138 2017-06-14 22:18:47 UTC 2017-06-14
Added XL machine identifier

Author: Robin den Hertog
Author Date: 2017-06-14 22:18:47 UTC

Added XL machine identifier

EM-1138

Signed-off-by: Robin den Hertog <r.denhertog@ultimaker.com>

115 of 15 results
This repository contains Public information 
Everyone can see this information.

Subscribers

No subscribers.