lp:ubuntu/saucy/nut
- Get this branch:
- bzr branch lp:ubuntu/saucy/nut
Branch information
- Owner:
- Ubuntu branches
- Status:
- Mature
Recent revisions
- 41. By Chuck Short
-
* Merge from Debian. Remaining changes:
- debian/control:
+ remove Build-Depends on libpowerman0-dev
+ remove nut-powerman-pdu
- debian/nut-powerman- pdu.{install, manpages} : dropped for now
- debian/{nut-cgi, nut-server} .postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/source_ nut.py, debian/ {nut,nut- server, nut-client} .install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu
- debian/series, debian/patches/ backport- fix-lp753661. patch: re-enabled
* Non-maintainer upload with fixes for wheezy.
* debian/nut-client. preinst: also revert /etc/nut/nut.conf mangling done
by postinst during upgrade from lenny to squeeze (Really closes: #677054)
Thanks to Andreas Beckmann for the review.
* Merge from Debian. Remaining changes:
- debian/control:
+ remove Build-Depends on libpowerman0-dev
+ remove nut-powerman-pdu
- debian/nut-powerman- pdu.{install, manpages} : dropped for now
- debian/{nut-cgi, nut-server} .postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/source_ nut.py, debian/ {nut,nut- server, nut-client} .install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu
- debian/series, debian/patches/ backport- fix-lp753661. patch: re-enabled
* Dropped the following patches, no longer required:
- debian/patches/ CVE-2012- 2944.patch (included upstream)
* Non-maintainer upload with fixes for wheezy.
* Only remove /etc/init.d/nut from previous versions of nut in nut-server
postinst if there are no local changes.
* Also remove /etc/init.d/nut in nut-client postinst. Thanks to
Laurent Bigonville for the hint.
* Only fix permissions of configfiles on first install.
* debian/control: Fix typo in package description. Thanks to Julien Cristau
for spotting this.
* Non-maintainer upload.
* debian/nut-client. preinst: revert /etc/nut/nut.conf mangling done by older
versions of the postinst (Closes: #677054)
* debian/rules: Stop the nut-client before nut-server on systems using
static
boot ordering (Closes: #679451)
* debian/nut-server. postinst: Remove /etc/init.d/nut on upgrade
(Closes: #677822)
* Rename nut-server.lintian- overrides to nut-client. lintian- overrides and
adjust overrides now that ups-monitor is shipped in nut-client package
(Closes: #677947)
* Add debian/patches/ 0001-fix- upsmon- regression. patch: Fix upsmon/upssched
regression (Taken from upstream) (Closes: #679513)
* Move nut metapackage to Section: metapackages
* Also create nut user when installing nut-client package and do not delete
it on purge anymore (Closes: #682000)
* Drop /etc/default/nut → /etc/nut/nut.conf migration code, migration
happends before squeeze release and this was against policy to have a
maintainer script modifying a conffile in the first place (Closes: #684392)
* Add dependency against adduser and lsb-base on nut-client package
* Be sure that client is stopped before the server also when using
dependencies based boot
* Fix package descriptions (Closes: #678068)
* Also install /bin/upssched-cmd in nut-client package as this script is
referenced in default upssched.conf config file
* debian/watch: Update watch file
* Be sure that all maintainer scripts are returning 0 at their end
* New upstream release (Closes: #671444)
* acknowledges NMU (Closes: #613643)
* debian/nut-client. init: fix action "start" and use of log_*_*msg
LSB log functions (Closes: #675619)
* debian/nut-server. preinst: remove obsolete file(s) left in
/etc/udev/rules.d and related processing: udev files are now located
in /lib/udev/rules, and there is no reason to modify the dedicated
USB UPS rules (52-nut-usbups. rules) (Closes: #660072)
* debian/nut-server. init: rewrite to match upsd / drivers startup scope
* debian/nut-client. init: created to match upsmon startup scope
(Closes: #634858)
* debian/nut.TODO. Debian, debian/Makefile.am: updated to reflect the above
* debian/rules: install nut-client.init, and update to reflect the above
* debian/control, debian/Makefile.am: updated to reflect the above
* debian/control:
- add Breaks on nut-server (<< 2.6.3-1~)
- bump Standards-Version to 3.9.3
* debian/nut-client. links: renamed from debian/ nut-server. links, since
ups-monitor is now provided by nut-client initscript
* debian/nut.README. Debian: renamed from nut-server. README. Debian,
to provide it with both client and server packages
* debian/nut-server. install: add missing drivers (clone-outlet,
liebert-esp2 and microdowell)
* debian/nut-server. manpages: add missing manual pages (apcsmart-old,
ivtscd, liebert-esp2 and microdowell)
* SECURITY UPDATE: remote denial of service
- debian/CVE-2012- 2944.patch: limit the set of parsed characters to ' '
through '~'
- CVE-2012-2944
* Merge from Debian testing. Remaining changes:
- debian/control: Drop Build-Depends on libpowerman0-dev (currently in
universe)
- debian/{nut-cgi, nut-server} .postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/nut-powerman- pdu.{install, manpages} : dropped for now.
- debian/source_ nut.py, debian/ {nut,nut- server, nut-client} .install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu.
- debian/series, debian/patches/ backport- fix-lp753661. patch: re-enabled.
* New upstream release (Closes: #635186, #598741, #633756, #638221)
* debian/nut-server. {install, manpages} : add richcomm_usb
* debian/nut-server. install, debian/rules: install Avahi service file
* debian/rules, nut-client.install: install Augeas lenses
* debian/nut-server. README. Debian: clarify udev explanation (Closes: #529664)
* debian/patches/ 0001-fix_ spelling_ and_typo. patch,
debian/patches/ 0003-libupsclie nt-version. patch: removed since these are now
fixed upstream
* debian/patches/ series: updated
* Merge from debian unstable. Remaining changes:
- debian/control: Drop Build-Depends on libpowerman0-dev (currently in
universe)
- debian/{nut-cgi, nut-server} .postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/nut-powerman- pdu.{install, manpages} : dropped for now.
- debian/source_ nut.py, debian/ {nut,nut- server, nut-client} .install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu.
- debian/series, debian/patches/ backport- fix-lp753661. patch: re-enabled.
* New upstream release (Closes: #594989)
* debian/control:
- remove legacy Build-Depends for nut-hal-drivers on libdbus and libglib
- Build-Depends-Indep on docbook-xsl for offline document
generation (Closes: #635347)
* debian/nut-server. install: add apcsmart-old
* debian/nut-server. init:
- add udev as Required-Start/Stop (Closes: #642412)
- remove legacy support for /etc/default/nut (Closes: #638021)
* debian/patches/ 0003-libupsclie nt-version. patch: added to fix the missing
libupsclient version info bump
* debian/libupsclient1- dev.links: update link name
* debian/libupsclient1. symbols: add with upscli_tryconnect
* debian/nut.TODO. Debian: update and complete the TODO list
* Fix FTBFS for Ubuntu (LP: #815760):
- debian/control: Build-Depends-Indep on docbook-xsl for offline
document generation.
* Merge from Debian unstable (LP: #811976). Remaining changes:
- debian/control: Drop Build-Depends on libpowerman0-dev (currently in
universe)
- debian/{nut-cgi, nut-server} .postinst: add nut to the dialout and nut
groups unconditonally to handle the upgrade from hardy release.
- debian/nut-powerman- pdu.{install, manpages} : dropped for now.
- debian/source_ nut.py, debian/ {nut,nut- server, nut-client} .install,
debian/rules: Install apport hooks for all top-level nut packages.
- debian/rules: Use udev version for Ubuntu.
- debian/series, debian/patches/ backport- fix-lp753661. patch: re-enabled.
* debian/nut.README. Debian: Adjust udev rules naming for permissions override
(Closes: #529664)
* Re-add and refresh debian/patches/ 0001-fix_ spelling_ and_typo. patch:
Some typos and spelling errors remain.
* Split nut package into nut-client and nut-server, keep nut package as
metapackage
* Generate PDF and html doc and install it in nut-doc package
* debian/rules:
- List non-installed files
- Includes python-module.mk
- Add flags to build documentation and install it
* debian/control:
- Add python-nut package and add python build-dependency
- Set nut-powerman-pdu priority to extras
- Add nut-monitor package
- Add nut-doc package and add required C/R/P
- Add libups-nut-perl package
* debian/nut-server. prerm: Remove /var/run/nut during removal
* Merge from debian unstable. Remaining changes:
- debian/control:
+ Drop Build-Depends on libpowerman0-dev (currently in universe)
- debian/{nut-cgi, nut}.postinst: add nut to the dialout and nut groups
unconditonally to handle the upgrade from hardy release.
- debian/nut-powerman- pdu.{install, manpages} : dropped for now.
- debian/source_ nut.py, debian/nut.install, debian/rules: Install apport hook.
- debian/rules: Use udev version for Ubuntu.
* debian/patches/ backport- fix-lp753661. patch: Refreshed.
* Drop changes due to .pc being not clean.
* New upstream release (Closes: #595953, #614842, #595773)
* debian/patches/ *.patch: removed since these are now fixed upstream
* Drop HAL package and build-dependencies (Closes: #613197)
* debian/control:
- Bump Standards-Version to 3.9.2 (no further changes)
- Drop autotools build-dependencies (not needed anymore)
- Drop non-existing build-dependencies
* debian/rules:
- Correctly pass flags to configure
* Merge from debian unstable (LP: #789323). Remaining changes:
+ debian/control:
- Update maintainer as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
+ debian/{nut-cgi, nut}.postinst: add nut to the dialout and nut groups
unconditonally to handle the upgrade from hardy release.
+ debian/nut-powerman- pdu.install, debian/ nut-powerman- pdu.manpages: dropped for now.
+ debian/nul-hal- drivers. {docs,install, postinst, preinst} : Dropped since hal is in universe now
+ debian/nut.links: must create the init script link, used if the upse needs to be powered down
(LP: #357583)
+ debian/source_ nut.py, debian/nut.install, debian/rules: Install apport hook.
+ debian/patches/ backport- fix-lp753661. patch
+ Dropped:
- debian/patches/ fix_pc_ file.patch: replaced by debian's 0002-fix_ libupsclient_ pc.patch
* debian/patches/ fix_pc_ file.patch: add DEP3 patch header
* debian/patches/ debian- changes- 2.6.0-1: remove that accidental file
* debian/nut-snmp. docs: Distribute snmp.txt doc file (Closes: #548295)
* d/p/0001-fix_spelling_ and_typo. patch: Update and refresh
* debian/nut.lintian- overrides: Fix typo
* debian/patch/0002- fix_libupsclien t_pc.patch: Fix libupsclient.pc (Closes:
#624255)
* debian/rules:
- Switch to cdbs
- Remove not existing configure options (Closes: #611813)
- Drop Phony rules (Closes: #613699)
* debian/control:
- Add cdbs build-dependency
* debian/patches/ backport- fix-lp753661. patch: Backport fix
to trim extraneous end-of-line, in buggy HID string tables,
which results in upsc breaking the communication pipe.
(LP: #753661)
* fix_pc_file.patch: fix .pc source files by using LIBSSL_LIBS instead of
LIBSSL_LDFLAGS to avoid a FTBFS in packages that uses libupsclient.pc
(LP: #743484)
* Merge from Debian unstable, remaining changes:
+ debian/control:
- Update maintainer as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
+ debian/{nut-cgi, nut}.postinst: add nut to the dialout and nut groups
unconditonally to hanle the upgrade from hardy release.
+ debian/nut-powerman- pdu.install, debian/ nut-powerman- pdu.manpages: dropped for now.
+ debian/nul-hal- drivers. {docs,install, postinst, preinst} : Dropped since hal is in universe now
+ debian/nut.links: must create the init script link, used if the upse needs to be powered down
(LP: #357583)
+ debian/source_ nut.py, debian/nut.install, debian/rules: Install apport hook.
+ Dropped:
- debian/patches/ 0002-fix_ udev_action. patch: Accepted upstream.
- debian/patches/ 0004-netvision- improvements- lp-600950: no longer needed.
- debian/patches/ 0005-fix- nut-m4. patch: no longer needed.
- debian/patches/ 9999-autoconf. patch: no longer needed.
* New upstream release (Closes: #575176, #588648, #609597, #687985)
* debian/patches/ *.patch: removed since these are now fixed upstream
* debian/patches/ 0001-fix_ spelling_ and_typo. patch,
debian/patches/ series: reworked to match the new upstream release
* debian/nut.install, debian/nut.manpages: remove obsolete reference to
megatec and megatec_usb, now respectively replaced by blazer_ser and
blazer_usb
* debian/nut.docs: limit distributed documentation
* debian/control:
- Wrap build-dependencies
- Change nut-cgi Recommends to apache2 | httpd-cgi
* debian/nut.postinst: Only trigger USB subsystem, should Closes: #574769
* debian/patches/ 0002-fix_ udev_action. patch: Use SUBSYSTEM instead of BUS
* debian/control, debian/rules,
debian/nut-hal- drivers. {docs,install, postinst, preinst} : Drop
nut-hal-drivers since Nut doesnt go into universe.
* Split patches/debian- changes- 2.4.3-2ubuntu1 into
patches/0005-fix- nut-m4. patch and patches/ 9999-autoconf. patch
* Readd lost debian/patches0004- netvision- improvements- lp-600950. patch patch
(LP: #707050)
* debian/patches/ 0002-fix_ udev_action. patch:
Change BUS to SUBSYSTEMS, since the former is deprecated. (LP: #692171)
* debian/nut.postinst: Uncomment missing call to adduser
* debian/control: Drop hal build dependency, we don't need the daemon to
build the package. Add a hal dependency to nut-hal-drivers, which is the
only thing that actually needs it.
* Merge from debian unstable. Remaining changes:
+ debian/control:
- Update maintainer as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
+ debian/{nut-cgi, nut}.postinst: add nut to the dialout and nut groups
unconditonally to hanle the upgrade from hardy release.
+ debian/nut-powerman- pdu.install, debian/ nut-powerman- pdu.manpages: dropped for now.
+ debian/nut.links: must create the init script link, used if the upse needs to be powered down
(LP: #357583)
+ debian/nut.postinst: Update udevadm trigger.
"libusb_get_report: error sending control message:
Operation not permitted" error on some UPS devices. (LP: #572262)
+ debian/source_ nut.py, debian/nut.install, debian/rules: Install apport hook.
+ debian/patches/ netvision- improvements- lp-600950. patch: Add improvements
for netvision UPSes
+ Fix FTBFS with ld --as-needed.
+ Dropped:
- debian/patches/ 03_udev_ rules_change. dpatch: Use debian's instead.
- debian/patches/ 04_nut_ small-buffers. dpatch: Use debian's instead.
* debian/control:
- Bump Standards-Version to 3.9.1
- Update Vcs-* fields to new GIT repository
- Add myself as Uploaders
* Switch to dpkg-source 3.0 (quilt) format (Closes: #573601)
* debian/patches/ 0001-low_ speed_usb_ ups.patch: Use patch system for changes
that were applied directly in the source
* Add debian/gbp.conf file
* debian/watch: Bump version to 3
* Add debian/patches/ 0002-fix_ udev_action. patch: Also set permission for
"change" udev ACTION (Closes: #557178)
* debian/nut.postrm: Do not try to remove nut user is deluser is not
installed anymore
* debian/nut.manpages: Install manpage nut.conf.5 (Closes: #528222)
* debian/copyright: Fix copyright-with-old- dh-make- debian- copyright
* Remove nut-snmp.lintian- overrides, not needed anymore
* debian/patches/ 0003-fix_ spelling_ and_typo. patch: Fix some spelling errors
* Add debian/libupsclient1. symbols file
* Add debian/nut.links: Re-add /etc/init.d/ups-monitor that was lost for
some reasons (Closes: #592351)
* debian/nut.lintian- overrides: Add override for
init.d-script- does-not- provide- itself /etc/init. d/ups-monitor
* Drop libupsclient1.post{inst, rm}: ldconfig call is added automatically by
debhelper
* debian/libupsclient1- dev.install: Do not ship /lib/libupsclie nt.la anymore
* debian/rules: Remove dpatch logic as we are using package source version
'3.0 (quilt)'
* debian/compat: Bump debhelper compatibility to 8
* Non-maintainer upload.
* drivers/libhid.c: Apply r2407 from upstream to fix bug with some
low speed UPS devices. (Closes: #583371)
* Fix FTBFS with ld --as-needed.
* debian/patches/ netvision- improvements- lp-600950. patch: Add improvements for netvision UPSes
(LP: #600950)
* debian/source_ nut.py, debian/nut.install, debian/rules: Install apport hook.
* debian/patches/ 04_nut- small-buffers. dpatch: Fix "libusb_get_report: error sending control message:
Operation not permitted" error on some UPS devices. (LP: #572262)
* debian/nut.postinst: Revert dropping of --action=change. "add" events must
not ever be triggered automatically.
* Add 03_udev_rules_change. dpatch: Run udev rules on change events, too.
* debian/control: grr...fix ftbfs.
* Merge from debian testing. Remaining changes (LP: #535152):
+ debian/control:
- Update maintainer as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
+ debian/{nut-cgi, nut}.postinst: add nut to the dialout and nut groups
unconditonally to hanle the upgrade from hardy release.
+ debian/nut-powerman- pdu.install, debian/ nut-powerman- pdu.manpages: dropped for now.
+ debian/nut.links: must create the init script link, used if the upse needs to be powered down
(LP: #357583)
+ debian/nut.postinst: Update udevadm trigger.
+ Dropped:
- debian/patches/ 02-fix- trust-pw4130m. dpatch: No longer needed.
* New upstream release (Closes: #544390, #528222, #539747, #526811,
#562064)
* debian/nut.install, debian/nut.manpages:
- remove cyberpower driver and manpage
- add bestfortress, clone and ivtscd drivers and manpages
* debian/rules:
- change udev dir to /lib/udev (Closes: #522327)
- replace deprecated calls to 'dh_clean -k' by dh_prep (Closes: #536599)
* debian/rules, debian/nut.install, debian/nut.install,
debian/nut.README. Debian: install configuration files, without the
sample suffix (Closes: #528641)
* debian/nut.links: restored (Closes: #522506)
* debian/nut.init:
- source nut.conf instead of default/nut for POWEROFF_WAIT(Closes:
#538173)
- fix status checking (Closes: #538785)
- improve detection of non configured system and beautify related
output (Closes: #563112)
- use 'invoke-rc.d' instead of calling the reboot script directly
- add $remote_fs to Required-Start and Required-Stop
* debian/nut.postrm: remove udev files and simplify cleanup (Closes:
#541629)
* debian/control:
- remove Luca Filipozzi from the Uploaders list (Closes: #568987)
- update Standards-Version to 3.8.4
- remove the debconf dependency
- bump debhelper version to (>= 7) in Build-Depends, for dh_prep
- add Breaks on nut-hal-drivers to ensure we have correct udev version
* Remove debconf support since it was related to really old nut
version (Closes: #518056):
- remove nut-cgi.config, nut.config, nut-cgi.templates, nut.templates,
and po/ directory
- update nut-cgi.postinst
* debian/nut.dirs: remove /var/run/nut to conform to Debian Policy
* debian/nut.postint:
- create /var/run/nut if needed
- improve security checks
* debian/nut.README. Debian: add a security note for ups.conf
* debian/watch: URL update
* debian/patches/ 02-fix- trust-pw4130m. dpatch: Fix issues with Trust
PW-4130M UPS. (LP: #447586) - 40. By Chuck Short
-
* Resynchronize with debian, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe).
- Remove the nut-powerman-pdu package for now.
+ debian/{nut-cgi, nut}.postinst: add nut to the dialout and nut groups
unconditionally, to handle the upgrade from hardy release.
+ debian/nut-powerman- pdu.install, debian/ nut-powerman- pdu.manpages: dropped
for now.
+ debian/nut.links: must create the init script link, used if the ups
needs to be powered down. (LP: #357583)
+ debian/nut.init: Fix status_of_proc messages not to lie to the user (LP: #416182)
* Non-maintainer upload.
* nut.postinst: fix post-processing of nut.conf to avoid overriding
user settings (Closes: #531220)
* Non-maintainer upload.
* nut.postinst: fix post-processing of nut.conf to avoid overriding
user settings (Closes: #531220) - 39. By Chuck Short
-
* Merge from debian testing, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
- remove the nut-powerman-pdu package for now
+ debian/{nut-cgi, nut}.postinst: add nut to the dialout and nut groups
unconditionally, to handle the upgrade from hardy release.
+ debian/nut-powerman- pdu.install, debian/ nut-powerman- pdu.manpages: dropped
for now
+ debian/nut.links: must create the init script link, used if the ups
needs to be powered down (LP: #357583)
+ debian/nut.init: Fix status_of_proc messages not to lie to the user (LP: #416182) - 38. By Chuck Short
-
debian/nut.init: Fix status_of_proc messages not to lie to
the user. (LP: #416182) - 37. By Chuck Short
-
* Merge from debian unstable, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
- Drop libpowerman0-dev from the Build-Depends (currently in universe)
- remove the nut-powerman-pdu package for now
+ debian/{nut-cgi, nut}.postinst: add nut to the dialout and nut groups
unconditionally, to handle the upgrade from hardy release.
+ debian/nut-powerman- pdu.install, debian/ nut-powerman- pdu.manpages: dropped
for now.
+ debian/nut.links: must create the init script link, used if the ups
needs to be powered down (LP: #357583) - 36. By Dustin Kirkland
-
debian/nut.links: must create the init script link, used if the ups
needs to be powered down, LP: #357583 - 35. By Arnaud Quette
-
Fixes for LP: #348454
* debian/control: add dpatch to Build-Depends,
* debian/patches/*: back for the below fix
* debian/patches/ 01_epdu_ fix.dpatch: fix an upstream problem with Eaton PDUs
vs untested PDUs from Raritan
* debian/rules: reactivate again dpatch rules - 34. By Dustin Kirkland
-
[ Arnaud Quette <email address hidden> ]
* Fix FTBFS
* debian/control:
- drop libpowerman0-dev from the Build-Depends (currently in universe)
- remove the nut-powerman-pdu package for now
* debian/nut-powerman- pdu.install, debian/ nut-powerman- pdu.manpages: dropped
for now - 33. By Arnaud Quette
-
* Acknowledge closed bugs in upstream and Debian: LP: #1568, LP: #221737,
LP: #239025, LP: #278495, LP: #332030, LP: #332032
* Merge from debian unstable, remaining changes:
+ debian/control:
- Update maintainer field as per spec.
- Add Breaks on nut-hal-drivers to ensure we have correct udev version.
+ debian/{nut-cgi, nut}.postinst: add nut to the dialout and nut groups
unconditionally, to handle the upgrade from the hardy release (simply
uncommented).
+ debian/rules: pre merge the changes for Ubuntu (udev path and version),
(simply uncommented). - 32. By Steve Langasek
-
* debian/
{nut-cgi, nut}.preinst: don't call adduser or addgroup *at
all*, these operations should be handled in the postinst. Since
this is the only custom action at all for nut-cgi, remove that
preinst completely.
* debian/{nut-cgi, nut}.postinst: add nut to the dialout
and nut groups unconditionally, to handle the upgrade from the hardy
release. LP: #222761, LP: #287781.
* debian/control: nut needs Pre-Depends: debconf instead of Depends:,
because we use debconf unconditionally in the preinst.
* reinstate debian/nut-hal- drivers. postinst, which was lost in a
merge; and fix it up to use udevadm trigger --action=change, the
safe way to install udev rules.
* have nut-hal-drivers Depend: on udev so it can use the above.
* fix up nut postinst to also use 'udevadm trigger --action=change'
Branch metadata
- Branch format:
- Branch format 7
- Repository format:
- Bazaar repository format 2a (needs bzr 1.16 or later)
- Stacked on:
- lp:ubuntu/trusty/nut