lp:ubuntu/quantal/mdadm

Created by Ubuntu Package Importer on 2012-08-21 and last modified on 2012-08-21
Get this branch:
bzr branch lp:ubuntu/quantal/mdadm
Members of Ubuntu branches can upload to this branch. Log in for directions.

Branch merges

Related bugs

Related blueprints

Branch information

Owner:
Ubuntu branches
Review team:
Ubuntu Development Team
Status:
Mature

Recent revisions

67. By Dimitri John Ledkov on 2012-08-21

Applying relevant changes from precise SRU:
udev-md-raid.rules to not auto-start arrays based on detection
of ddf or isw (imsm) signatures; this conflicts with dmraid usage in
precise and requires more analysis before it can be enabled in SRU.
LP: #1030292. Thanks to Steve Langasek.

66. By Dimitri John Ledkov on 2012-06-25

Copy udev rule from /etc/udev/rules.d/ as well as the
/lib/udev/rules.d/, to allow local administrator to override mdadm
rules file (LP: #1017407)

65. By Dimitri John Ledkov on 2012-06-15

* Merge from Debian testing. (LP: #920324) Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).

* Additional Ubuntu changes:
    - debian/initramfs/local-premount: add call wait_for_udev to wait a
    little longer for RAID devices to appear (LP: #942106)

* Dropped Ubuntu changes:
  - Build udeb with -O2 on ppc64, working around a link error. Builds
    fine without it on debian.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so
    that the rules file ends up with a more reasonable name. debian/rules
    changes for adding ubuntu's udev rule corresponding to mdadm. As we
    are now using 'upstream' udev rules see 3.2.3-2ubuntu2.

* Changes to Ubuntu changes:
  - debian/source_mdadm.py: make apport hook python 2 and 3 compatible
    (LP: #1013171).

* New upstream release closes this bugs:
  - mdadm --detail --scan segfaults during update-initramfs (LP: #969384)

64. By Dimitri John Ledkov on 2012-05-21

* Minimizing the merge-diff from Debian:
  + debian/rules, debian/mdadm.udev, debian/mdadm.mdadm-blkid.udev:
    Drop our own udev rules in favour of upstream's. Debian did so in
    3.0~devel3-43-g2800528-1. Upstream's rules have everything we had.
    (LP: #1002357, LP: #968074)
  + debian/initramfs/hooks: Update to copy only the new/correct udev rules
    file.
  + debian/rules: Remove pointless diff against debian. And now mdmon
  installs itself (LP: #957494).

* debian/patches/series: Remove `disable-udev-incr-assembly.diff' to
  enable incremental assembly, now that we are using upstream rules & we
  always had incremental assembly enabled.

* Fixing lintian tags, that are introduced in Ubuntu:
  + debian/source_mdadm.py: fix executable-not-elf-or-script
  + debian/changelog: correct trailer formating of acient changelog entry

63. By Clint Byrum on 2012-02-09

* Merge from Debian testing. (LP: #920324) Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - Build udeb with -O2 on ppc64, working around a link error.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).

62. By Clint Byrum on 2011-12-16

* Merge from debian unstable. Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - Build udeb with -O2 on ppc64, working around a link error.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).
* Disabling -fno-strict-aliasing as according to debian bug 375876 it
  has been unnecessary since mdadm 2.5.2
* Dropped changes:
  - applied upstream
  - d/rules: fix FTBFS by adding -Wno-unused-but-set-variable to
    compiler flags until upstream solves the issue. (fixed upstream)
  - d/control: add dependency on initscripts >= 2.88dsf-13.3 to ensure
    /run exists per http://wiki.debian.org/ReleaseGoals/RunDirectory
    (change also done in debian)
* d/rules: add 'man' to build mdadm.8

61. By Clint Byrum on 2011-08-24

* d/initramfs/mdadm-functions: Record in /run when boot-degraded
  question has been asked so that it is only asked once (LP: #820111)
* d/control: add dependency on initscripts >= 2.88dsf-13.3 to ensure
  /run exists per http://wiki.debian.org/ReleaseGoals/RunDirectory
* d/rules: fix FTBFS by adding -Wno-unused-but-set-variable to
  compiler flags until upstream solves the issue. (LP: #829463)

60. By Clint Byrum on 2011-05-24

Call checks in local-premount to avoid race condition with udev
and opening a degraded array. (LP: #778520)

59. By Clint Byrum on 2011-04-27

pass --test to mdadm to enable result codes for degraded arrays.
(LP: #761971)

58. By Surbhi Palande on 2011-03-23

mdadm udev rule incrementally adds mdadm member when detected. Starting
such an array in degraded mode is possible by mdadm -IRs. Using mdadm -ARs
without stopping the array first does nothing when no mdarray-unassociated
device is available. Using mdadm -IRs to start a previously partially
assembled array through incremental mode. Keeping the mdadm -ARs for
assembling arrays which were for some reason not assembled through
incremental mode (i.e through mdadm's udev rule). (LP: #728435)

Branch metadata

Branch format:
Branch format 7
Repository format:
Bazaar repository format 2a (needs bzr 1.16 or later)
Stacked on:
lp:ubuntu/raring/mdadm
This branch contains Public information 
Everyone can see this information.

Subscribers