lp:ubuntu/precise/u-boot-linaro

Related source package recipes

No recipes using this branch. (?)

Create packaging recipe

Related snap packages

Related bugs

Bug #707047: Only half of RAM useable when using Device Tree on Panda board

Medium

Triaged

Link a bug report

Related blueprints

4239. By John Rigby on 2012-04-02

Update to upstream 2012.02.3 u-boot-linaro which includes patch
to correct memory size on rev C4 Beagle.
(LP: #928580).

4238. By Robie Basak on 2012-03-15

Mark u-boot-linaro-omap4-panda-splusb for Multi-Arch: foreign, so that
this can be installed on non-arm hosts for USB-booting ARM boards.
(LP: #956037).

4237. By John Rigby on 2012-02-16

* Update to upstream 2012.02.2 u-boot-linaro

[ John Rigby ]
* SAUCE: Snowball: init serial later
* MMC: arm_pl180_mmci: allow multiple devices
* OMAP3 Beagle and OMAP4: add preEnv.txt support (LP: 932436)

[ Rob Herring ]
* net: allow setting env enetaddr from net device setting
* net: add Calxeda xgmac driver
* ARM: highbank: enable networking and pxe
* ARM: highbank: Add boot counter support
* ARM: highbank: add reset support
* ARM: highbank: setup env from boot source register
* ARM: highbank: change TEXT_BASE to 0x8000
* ARM: highbank: add autoboot script files
* ARM: highbank: fix us_to_tick calculation
* ARM: highbank: update autoboot bootdelay value

[ Jason Hobbs ]
* configs/highbank.h: point at env in nvram
* configs/highbank.h: correct the fdt_addr env variable

[ Robie Basak ]
* OMAP4: Force PXE booting when booting via spl-usb (LP: 927956)

4236. By John Rigby on 2012-01-19

Releasing 2012.01.1 to Ubuntu precise

4235. By Matthias Klose on 2011-12-05

Build for armhf.

4234. By John Rigby on 2011-10-05

* omap4: reduce default operating point for 4460 devices
  Reduce the operating point for 4460 to OPP100 (MPU at 700MHz)
  (LP: #867670)
    From bug report:
      With both A9 cores loaded 4460 reaches max temperature in about 30s at the
      current operating point of 930MHz. The operating point should be lowered to
      700MHz.
      It appears the panda heats more than I thought (and much more that the blaze),
      and by loading the 2 cores I can quite easily reach max temperature at 920MHz
      (it takes around 30s on my board!).
      At 700MHz, the temperature still increases but much slower. So if the A9 cores
      do not run at 100% all the time we shall be ok.
      So for now, we definitely need this change if we don't want to run with a
      heatsink...
* mmc: omap: enable high capacity
    Enable high capacity to host capability.
    Fixes eMMC detection on boot from MMC/SD card.
  mmc: omap: config VMMC, MMC1_PBIAS
    Config VMMC voltage to 3V for MMC/SD card slot
    and PBIAS settings needed for OMAP4
  (LP: #867650)

4233. By John Rigby on 2011-09-29

FFe: u-boot-linaro 11.09, misc fixes for new silicon and boards
(LP: #851974)
mmc: omap: enable high capacity
mmc: omap: config VMMC, MMC1_PBIAS
omap4: fix pad configuration settings for SDP and Panda
omap4: make SDRAM init work for ES1.0 silicon
omap4: IO settings
pxe: make the first label the implicit default
OMAP4: removing fdt_addr from the default env
U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
(LP: #837235)
Revert "armv7: adapt omap3 to the new cache maintenance framework"
(LP: #862013)

4232. By Ricardo Salveti on 2011-09-02

FFe: enabling build and package for OMAP4 SDP4430 (LP: #839615)

4231. By John Rigby on 2011-08-29

Allow loading of u-boot.bin as well as u-boot.img
Feature freeze exception (LP: #836748)

4230. By John Rigby on 2011-08-25

Same upstream, new upload for oneiric.
Feature freeze exception (LP: #833876)