lp:ubuntu/precise/mdadm

Created by Ubuntu Package Importer and last modified
Get this branch:
bzr branch lp:ubuntu/precise/mdadm
Members of Ubuntu branches can upload to this branch. Log in for directions.

Branch merges

Related bugs

Related blueprints

Branch information

Owner:
Ubuntu branches
Review team:
Ubuntu Development Team
Status:
Mature

Recent revisions

63. By Clint Byrum

* Merge from Debian testing. (LP: #920324) Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - Build udeb with -O2 on ppc64, working around a link error.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).

62. By Clint Byrum

* Merge from debian unstable. Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - Build udeb with -O2 on ppc64, working around a link error.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).
* Disabling -fno-strict-aliasing as according to debian bug 375876 it
  has been unnecessary since mdadm 2.5.2
* Dropped changes:
  - applied upstream
  - d/rules: fix FTBFS by adding -Wno-unused-but-set-variable to
    compiler flags until upstream solves the issue. (fixed upstream)
  - d/control: add dependency on initscripts >= 2.88dsf-13.3 to ensure
    /run exists per http://wiki.debian.org/ReleaseGoals/RunDirectory
    (change also done in debian)
* d/rules: add 'man' to build mdadm.8

61. By Clint Byrum

* d/initramfs/mdadm-functions: Record in /run when boot-degraded
  question has been asked so that it is only asked once (LP: #820111)
* d/control: add dependency on initscripts >= 2.88dsf-13.3 to ensure
  /run exists per http://wiki.debian.org/ReleaseGoals/RunDirectory
* d/rules: fix FTBFS by adding -Wno-unused-but-set-variable to
  compiler flags until upstream solves the issue. (LP: #829463)

60. By Clint Byrum

Call checks in local-premount to avoid race condition with udev
and opening a degraded array. (LP: #778520)

59. By Clint Byrum

pass --test to mdadm to enable result codes for degraded arrays.
(LP: #761971)

58. By Surbhi Palande

mdadm udev rule incrementally adds mdadm member when detected. Starting
such an array in degraded mode is possible by mdadm -IRs. Using mdadm -ARs
without stopping the array first does nothing when no mdarray-unassociated
device is available. Using mdadm -IRs to start a previously partially
assembled array through incremental mode. Keeping the mdadm -ARs for
assembling arrays which were for some reason not assembled through
incremental mode (i.e through mdadm's udev rule). (LP: #728435)

57. By Matthias Klose

Build udeb with -O2 on ppc64, working around a link error.

56. By Kees Cook

debian/mdadm.manpages: add manpages back to build (LP: #697821).

55. By Surbhi Palande

* Merge from debian unstable. (LP: #603582)
* Remaining changes
  - Assemble.c, config.c: upgraded to the mdadm-3.1.4 version of these files
    from Debian.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/rules: kept debian's switch to using dh_lintian
  - debian/mdadm.links, debian/mdadm.manpages: dropped owing to the fact
    that these are not used in Ubuntu. Also dropped the build-dep on docbook
    to man)
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntus version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name

54. By Surbhi Palande

* debian/initramfs/hook: Added following code (invoked on update-initramfs)
  (LP: #617725):
  - create a mdadm.conf if it is not found in /etc and copy it in initramfs
  - update an existing mdadm.conf in the initramfs if it does'nt include
    a definition of any array
  - warn the user if the definition of an active array is not found in the
    initramfs/etc/mdadm.conf

Branch metadata

Branch format:
Branch format 7
Repository format:
Bazaar repository format 2a (needs bzr 1.16 or later)
Stacked on:
lp:ubuntu/quantal/mdadm
This branch contains Public information 
Everyone can see this information.

Subscribers