Paul Larson

lp:~pwlars/+junk/device-models

Created by Paul Larson on 2015-03-19 and last modified on 2015-03-20

Only Paul Larson can upload to this branch. If you are Paul Larson please log in for upload directions.

8. By Paul Larson on 2015-03-20: move the volume button down 2 more mm
7. By Paul Larson on 2015-03-20: Move the slot for the volume button down by 2mm
6. By Paul Larson on 2015-03-19: eliminate ledge in the button slot
5. By Paul Larson on 2015-03-19: Restore base to 2mm and subtract a section from the center of it to reduce build volume
4. By Paul Larson on 2015-03-17: Redesign the button pushing to exert indirect force on the buttons. I
believe this will reduce the tendancy to lift the phone when the servo
activates. This will require printing another small insert to slide
along the hole that has been added.
3. By Paul Larson on 2015-03-17: * reduce base to 1mm thick
* increase wall height to 14
2. By Paul Larson on 2015-03-16: Make the servo mount now start at the leading edge of the hole, not at the center
1. By Paul Larson on 2015-03-16: Initial checkin after several iterations, there are a few things that surely need fixing still

This branch contains Public information

Everyone can see this information.