~ali-coban2006/snappy-hwe-snaps/+git/modem-manager:upstream-flow-control

Branch merges

Related source package recipes

No recipes using this branch. (?)

Create packaging recipe

Related snap packages

Related charm recipes

79a88ac... by Alfonso Sanchez-Beato on 2018-09-03

broadband-modem: set flow control from port

Set the flow control used in the data connection from the one
set in the port.

12f9988... by Alfonso Sanchez-Beato on 2018-09-03

Set serial port flow control from udev tag

Set the serial port flow control from the udev tag
ID_MM_TTY_FLOW_CONTROL before accessing the port.

9672d65... by Alfonso Sanchez-Beato on 2018-09-03

port-serial: add flow control property

Add flow control property to the MMPortSerial class, and use it when
setting the port flow control.

d3fdae0... by Alfonso Sanchez-Beato on 2018-09-03

modem-helpers: add flow control udev tag parser

Add function for parsing the content of the udev tag
ID_MM_TTY_FLOW_CONTROL.

e66f087... by Alfonso Sanchez-Beato on 2018-08-28

cinterion: disable SWWAN support

The PLS62-W does not really support SWWAN even though the AT
command responds to queries.

82fd275... by Alfonso Sanchez-Beato on 2018-08-27

Downgrade gettext dependency

So it can compile in xenial.

b75474a... by Alfonso Sanchez-Beato on 2018-07-30

cinterion: increment IP timeout

Increment timeout before pppd gives up when trying to get an IP address.
Needed as some times this modem does not respond to PPP frames, but we
want NetworkManager to wait a bit to stop pppd - otherwise the port is
not properly closed and does not respond to AT commands anymore.

23b41eb... by Alfonso Sanchez-Beato on 2017-04-21

plugins: dell: always probe AT ports

Previously, probing or not the commands depended on a race condition,
and, besides, we need the AT ports for implementing workarounds for
Sierra HL7588. Therefore, we make sure we always probe the AT ports in
the Dell plugin, even when an MBIM port has already been detected.

18edc52... by Alfonso Sanchez-Beato on 2018-08-27

Reset the modem on MBIM NOT_OPENED error for HL7588

Reset the modem for said condition so connection can be recovered
after resuming from S4.

06921d4... by Alfonso Sanchez-Beato on 2018-08-27

Send +CGACT for Sierra HL7588 on connection

Sent AT+CGACT=1,3 command for Sierra HL7588 on connection as a
workaround for buggy modem firmware. This makes sure vzwinternet
is activated.

This workaround is executed for both Sierra and Dell VID/PID, but
an additional twist is needed for the later, as Dell reused same
VID/PID for a Telit modem, so we additionally check the ouput of
AT+CGMM.