Branches for Wily

Author: Tim Gardner
Revision Date: 2015-10-13 17:24:07 UTC

[ Tim Gardner ]

* Release Tracking Bug
  - LP: #1506972

[ Paolo Pisati ]

* Pull in latest 4.2 based kernel changes from
  https://github.com/raspberrypi/linux rpi-4.2.y
  e3eba57f7c9ffba24f695f187b6578d56495998a
* Revert "SAUCE: raspi2 -- add overlays directory to dts-dirs to get the overlays installed"
* [Config] DMA_BCM2835=y, =m for the other newly introduced options

[ Upstream Kernel Changes ]

* spi: bcm2835: fix overflow in calculation of transfer time
* BCM270X_DT: Add SDIO overlay
* leds-gpio: Implement the brightness_get method
* RaspiDAC3 support
* bcm2835: camera: check for scene not being found
* BCM270X_DT: Use fixed-factor-clock for uart1
* tpa6130a2: Add headphone switch control
* vchiq_arm: Sort out the vmalloc case
* config: Add SND_SOC_ADAU1701 module
* staging: fbtft: Add reset to fbtft_init_display_dt()
* bcm2835-mmc: Don't overwrite MMC capabilities from DT
* BCM270X_DT: mz61581: Set txbuflen to 32k
* backport: spi: bcm2835: BUG: fix wrong use of PAGE_MASK
* mt7601u: fix dma from stack address
* mt7601u: use correct ieee80211_rx variant
* mt7601u: fix tx status reporting contexts
* mt7601u: lock out rx path and tx status reporting
* config: Add CIFS_DFS_UPCALL, CIFS_ACL, CIFS_SMB2, CIFS_FSCACHE
* Add SMI driver
* Add SMI NAND driver
* BCM270X_DT: Document SMI overlay
* dwc_otg: Force host mode to fix incorrect compute module boards
* bcm2709: Remove custom barrier implementation it is no different to default
* config: Add CONFIG_UHID
* Add support for the HiFiBerry DAC+ Pro.
* dmaengine: bcm2708: Make legacy API available for bcm2835-dma
* dmaengine: bcm2835: Add slave dma support
* dmaengine: bcm2835: set residue_granularity field
* dmaengine: bcm2835: Load driver early and support legacy API
* dmaengine: bcm2835: Add debug option for setting wait states
* configs: Enable DMA_BCM2835
* dmaengine: bcm2708: Change DT compatible string
* config: Add CONFIG_CRYPTO_USER_API_SKCIPHER
* config: Add options for supporting openlabs 802.15.4 radio
* BCM270X_DT: Add at86rf233 overlay
* bcm2835-gpiomem: Fix for ARCH_BCM2835 builds
* scripts/mkknlimg: Improve ARCH_BCM2835 detection
* BCM270X_DT: Make mmc overlay compatible with current firmware
* bcm2835-dma: Fix dreq not set for slave transfers
* bcm2835-dma: Limit cyclic transfers on lite channels to 32k
* BCM270X_DT: Reduce default at86rf233 SPI frequency
* bcm2708: Use #include in dtsi files.
* clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.
* clk: bcm2835: Add binding docs for the new platform clock driver.
* clk: bcm2835: Add support for programming the audio domain clocks
* clk: bcm2835: Also build the driver for downstream kernels.
* bcm2835: Add (disabled) devicetree for the audio clock manager.
* drm/atomic: fix null pointer access to mode_fixup callback
* Use dts-dirs feature for overlays.

Author: Tim Gardner
Revision Date: 2015-10-13 17:24:07 UTC

[ Tim Gardner ]

* Release Tracking Bug
  - LP: #1506972

[ Paolo Pisati ]

* Pull in latest 4.2 based kernel changes from
  https://github.com/raspberrypi/linux rpi-4.2.y
  e3eba57f7c9ffba24f695f187b6578d56495998a
* Revert "SAUCE: raspi2 -- add overlays directory to dts-dirs to get the overlays installed"
* [Config] DMA_BCM2835=y, =m for the other newly introduced options

[ Upstream Kernel Changes ]

* spi: bcm2835: fix overflow in calculation of transfer time
* BCM270X_DT: Add SDIO overlay
* leds-gpio: Implement the brightness_get method
* RaspiDAC3 support
* bcm2835: camera: check for scene not being found
* BCM270X_DT: Use fixed-factor-clock for uart1
* tpa6130a2: Add headphone switch control
* vchiq_arm: Sort out the vmalloc case
* config: Add SND_SOC_ADAU1701 module
* staging: fbtft: Add reset to fbtft_init_display_dt()
* bcm2835-mmc: Don't overwrite MMC capabilities from DT
* BCM270X_DT: mz61581: Set txbuflen to 32k
* backport: spi: bcm2835: BUG: fix wrong use of PAGE_MASK
* mt7601u: fix dma from stack address
* mt7601u: use correct ieee80211_rx variant
* mt7601u: fix tx status reporting contexts
* mt7601u: lock out rx path and tx status reporting
* config: Add CIFS_DFS_UPCALL, CIFS_ACL, CIFS_SMB2, CIFS_FSCACHE
* Add SMI driver
* Add SMI NAND driver
* BCM270X_DT: Document SMI overlay
* dwc_otg: Force host mode to fix incorrect compute module boards
* bcm2709: Remove custom barrier implementation it is no different to default
* config: Add CONFIG_UHID
* Add support for the HiFiBerry DAC+ Pro.
* dmaengine: bcm2708: Make legacy API available for bcm2835-dma
* dmaengine: bcm2835: Add slave dma support
* dmaengine: bcm2835: set residue_granularity field
* dmaengine: bcm2835: Load driver early and support legacy API
* dmaengine: bcm2835: Add debug option for setting wait states
* configs: Enable DMA_BCM2835
* dmaengine: bcm2708: Change DT compatible string
* config: Add CONFIG_CRYPTO_USER_API_SKCIPHER
* config: Add options for supporting openlabs 802.15.4 radio
* BCM270X_DT: Add at86rf233 overlay
* bcm2835-gpiomem: Fix for ARCH_BCM2835 builds
* scripts/mkknlimg: Improve ARCH_BCM2835 detection
* BCM270X_DT: Make mmc overlay compatible with current firmware
* bcm2835-dma: Fix dreq not set for slave transfers
* bcm2835-dma: Limit cyclic transfers on lite channels to 32k
* BCM270X_DT: Reduce default at86rf233 SPI frequency
* bcm2708: Use #include in dtsi files.
* clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.
* clk: bcm2835: Add binding docs for the new platform clock driver.
* clk: bcm2835: Add support for programming the audio domain clocks
* clk: bcm2835: Also build the driver for downstream kernels.
* bcm2835: Add (disabled) devicetree for the audio clock manager.
* drm/atomic: fix null pointer access to mode_fixup callback
* Use dts-dirs feature for overlays.