One 8 GB Cruzer Micro USB causes this problem.
(I had GParted reformat this to FAT32, then to ext4. Same error.)
I have this othe 16 GB Sandisk Cruzer USB, and I don't have a problem using Startup Disk Creator on it.
If the 8 GB USB is plugged in, Startup Disk Creator crashes immediately upon starting up.
Or if the 8 GB is not plugged, I can start up Startup Disk Creator, but as soon as I insert the
8 GB USB into the port, Startup Disk Creator crashes immediately.
`lsusb --verbose` shows this for the two USB sticks.
Bus 002 Device 004: ID 0781:5406 SanDisk Corp. Cruzer Micro U3
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0781 SanDisk Corp.
idProduct 0x5406 Cruzer Micro U3
bcdDevice 2.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Bus 002 Device 005: ID 0781:5530 SanDisk Corp. Cruzer
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0781 SanDisk Corp.
idProduct 0x5530 Cruzer
bcdDevice 1.03
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Same results for me.
One 8 GB Cruzer Micro USB causes this problem.
(I had GParted reformat this to FAT32, then to ext4. Same error.)
I have this othe 16 GB Sandisk Cruzer USB, and I don't have a problem using Startup Disk Creator on it.
If the 8 GB USB is plugged in, Startup Disk Creator crashes immediately upon starting up.
Or if the 8 GB is not plugged, I can start up Startup Disk Creator, but as soon as I insert the
8 GB USB into the port, Startup Disk Creator crashes immediately.
`lsusb --verbose` shows this for the two USB sticks.
Bus 002 Device 004: ID 0781:5406 SanDisk Corp. Cruzer Micro U3 tions 1 ionValue 1 orType 4 eNumber 0 eSetting 0 eClass 8 Mass Storage eSubClass 6 SCSI eProtocol 80 Bulk-Only
bDescriptorTyp e 5
bEndpointAddre ss 0x81 EP 1 IN
bmAttributes 2
wMaxPacketSize 0x0200 1x 512 bytes
bDescriptorTyp e 5
bEndpointAddre ss 0x02 EP 2 OUT
bmAttributes 2
wMaxPacketSize 0x0200 1x 512 bytes
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0781 SanDisk Corp.
idProduct 0x5406 Cruzer Micro U3
bcdDevice 2.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 0
Bus 002 Device 005: ID 0781:5530 SanDisk Corp. Cruzer tions 1 ionValue 1 orType 4 eNumber 0 eSetting 0 eClass 8 Mass Storage eSubClass 6 SCSI eProtocol 80 Bulk-Only
bDescriptorTyp e 5
bEndpointAddre ss 0x81 EP 1 IN
bmAttributes 2
wMaxPacketSize 0x0200 1x 512 bytes
bDescriptorTyp e 5
bEndpointAddre ss 0x02 EP 2 OUT
bmAttributes 2
wMaxPacketSize 0x0200 1x 512 bytes
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0781 SanDisk Corp.
idProduct 0x5530 Cruzer
bcdDevice 1.03
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 1