Ok, I have just installed the 'daily build' kernel and can confirm that this bug still exists:-
$ uname -a Linux proxyauth0 3.1.0-030100rc10-generic #201110200610 SMP Thu Oct 20 10:11:32 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
$ dmesg | grep -i bnx [ 1.442551] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) [ 1.442580] bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.925067] bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:1a:4b:4c:ae:1e [ 1.925129] bnx2 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 62.944050] bnx2: Can't load firmware file "bnx2/bnx2-mips-06-6.2.1.fw" [ 62.944089] bnx2 0000:05:00.0: PCI INT A disabled [ 62.944104] bnx2: probe of 0000:05:00.0 failed with error -2 [ 65.971304] bnx2 0000:03:00.0: irq 46 for MSI/MSI-X [ 66.096032] bnx2 0000:03:00.0: eth0: using MSI [ 69.294254] bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex
$ lsmod | grep bnx bnx2 86844 0
Ok, I have just installed the 'daily build' kernel and can confirm that this bug still exists:-
$ uname -a 0-generic #201110200610 SMP Thu Oct 20 10:11:32 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
Linux proxyauth0 3.1.0-030100rc1
$ dmesg | grep -i bnx mips-06- 6.2.1.fw"
[ 1.442551] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
[ 1.442580] bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.925067] bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:1a:4b:4c:ae:1e
[ 1.925129] bnx2 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 62.944050] bnx2: Can't load firmware file "bnx2/bnx2-
[ 62.944089] bnx2 0000:05:00.0: PCI INT A disabled
[ 62.944104] bnx2: probe of 0000:05:00.0 failed with error -2
[ 65.971304] bnx2 0000:03:00.0: irq 46 for MSI/MSI-X
[ 66.096032] bnx2 0000:03:00.0: eth0: using MSI
[ 69.294254] bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex
$ lsmod | grep bnx
bnx2 86844 0