Comment 9 for bug 867670

This bug was fixed in the package u-boot-linaro - 2011.09.6-0ubuntu1

---------------
u-boot-linaro (2011.09.6-0ubuntu1) oneiric; urgency=low

  * omap4: reduce default operating point for 4460 devices
    Reduce the operating point for 4460 to OPP100 (MPU at 700MHz)
    (LP: #867670)
      From bug report:
        With both A9 cores loaded 4460 reaches max temperature in about 30s at the
        current operating point of 930MHz. The operating point should be lowered to
        700MHz.
        It appears the panda heats more than I thought (and much more that the blaze),
        and by loading the 2 cores I can quite easily reach max temperature at 920MHz
        (it takes around 30s on my board!).
        At 700MHz, the temperature still increases but much slower. So if the A9 cores
        do not run at 100% all the time we shall be ok.
        So for now, we definitely need this change if we don't want to run with a
        heatsink...
  * mmc: omap: enable high capacity
      Enable high capacity to host capability.
      Fixes eMMC detection on boot from MMC/SD card.
    mmc: omap: config VMMC, MMC1_PBIAS
      Config VMMC voltage to 3V for MMC/SD card slot
      and PBIAS settings needed for OMAP4
    (LP: #867650)
 -- John Rigby <email address hidden> Wed, 05 Oct 2011 17:17:34 -0600