Author: Martin Pitt
Revision Date: 2015-06-01 08:42:43 UTC

* Merge with Debian unstable. Remaining Ubuntu changes:
  - debian/postinst: Make /etc/resolv.conf a relative symlink so that it
    works when setting up chroots.
  - Eliminate all references to /etc/resolvconf/run. This should all be done
    directly in /run, there is no reason to support making any of this
    configurable with a symlink since we already have a versioned dependency
    on the version of initscripts that introduces the /run transition.
* Clean up some merge delta, thanks to Thomas Hood for reviewing!
  - Put back debian/triggers (should have been re-added as part of fixing
    LP #1453185)
  - Drop symlink check in dhclient-enter-hooks.d/resolvconf, to avoid
    dhclient overwriting /etc/resolv.conf when resolvconf is installed.
    (LP: #1385010)
  - resolvconf/link-tail-to-original debconf question again defaults to
    false; it's rather irrelevant as we install resolvconf by default.

Author: Martin Pitt
Revision Date: 2015-06-01 08:42:43 UTC

* Merge with Debian unstable. Remaining Ubuntu changes:
  - debian/postinst: Make /etc/resolv.conf a relative symlink so that it
    works when setting up chroots.
  - Eliminate all references to /etc/resolvconf/run. This should all be done
    directly in /run, there is no reason to support making any of this
    configurable with a symlink since we already have a versioned dependency
    on the version of initscripts that introduces the /run transition.
* Clean up some merge delta, thanks to Thomas Hood for reviewing!
  - Put back debian/triggers (should have been re-added as part of fixing
    LP #1453185)
  - Drop symlink check in dhclient-enter-hooks.d/resolvconf, to avoid
    dhclient overwriting /etc/resolv.conf when resolvconf is installed.
    (LP: #1385010)
  - resolvconf/link-tail-to-original debconf question again defaults to
    false; it's rather irrelevant as we install resolvconf by default.

Author: Nathan Dorfman
Revision Date: 2014-11-30 20:59:01 UTC

Fix bug 1349011

Author: Martin Pitt
Revision Date: 2014-11-04 10:40:39 UTC

* Merge with Debian unstable. Remaining Ubuntu changes:
  - debian/postinst: Make /etc/resolv.conf a relative symlink so that it
    works when setting up chroots.
  - Eliminate all references to /etc/resolvconf/run. This should all be done
    directly in /run, there is no reason to support making any of this
    configurable with a symlink since we already have a versioned dependency
    on the version of initscripts that introduces the /run transition.
  - Also remove debian/triggers to avoid needlessly calling resolvconf's
    postinst. (LP: #931335)
* Drop our debconfiscation when /etc/resolv.conf is immutable. This
  transition happened in 12.04 already, and if since then someone made the
  symlink immutable that doesn't cause much harm. This gets rid of quite a
  sizable delta.

Author: Martin Pitt
Revision Date: 2014-11-04 10:40:39 UTC

* Merge with Debian unstable. Remaining Ubuntu changes:
  - debian/postinst: Make /etc/resolv.conf a relative symlink so that it
    works when setting up chroots.
  - Eliminate all references to /etc/resolvconf/run. This should all be done
    directly in /run, there is no reason to support making any of this
    configurable with a symlink since we already have a versioned dependency
    on the version of initscripts that introduces the /run transition.
  - Also remove debian/triggers to avoid needlessly calling resolvconf's
    postinst. (LP: #931335)
* Drop our debconfiscation when /etc/resolv.conf is immutable. This
  transition happened in 12.04 already, and if since then someone made the
  symlink immutable that doesn't cause much harm. This gets rid of quite a
  sizable delta.

Author: Martin Pitt
Revision Date: 2014-06-25 10:57:23 UTC

postinst: Only run the cleanup for the obsolete network.target.wants on
configure, not on other actions. Thanks to Thomas Hood for pointing out.

Author: Martin Pitt
Revision Date: 2014-06-25 10:57:23 UTC

postinst: Only run the cleanup for the obsolete network.target.wants on
configure, not on other actions. Thanks to Thomas Hood for pointing out.

Author: Timo Jyrinki
Revision Date: 2014-04-17 14:45:17 UTC

debian/preinst: On 12.04 LTS the system works without /etc/resolv.conf.
Upon upgrading such a system to 14.04 LTS network stops working.
Therefore, create a symlink upon upgrade from resolvconf <= 1.64 in the
case that /etc/resolv.conf does not exist at all. (LP: #1308378)

Author: Timo Jyrinki
Revision Date: 2014-04-17 14:45:17 UTC

debian/preinst: On 12.04 LTS the system works without /etc/resolv.conf.
Upon upgrading such a system to 14.04 LTS network stops working.
Therefore, create a symlink upon upgrade from resolvconf <= 1.64 in the
case that /etc/resolv.conf does not exist at all. (LP: #1308378)

Author: Timo Jyrinki
Revision Date: 2014-04-17 12:15:24 UTC

debian/preinst: On 12.04 LTS the system works without /etc/resolv.conf.
Upon upgrading such a system to 14.04 LTS network stops working.
Therefore, create a symlink upon upgrade from resolvconf <= 1.64 in the
case that /etc/resolv.conf does not exist at all. (LP: #1308378)

Author: Stéphane Graber
Revision Date: 2013-01-18 16:52:12 UTC

releasing version 1.69ubuntu1

Author: Stéphane Graber
Revision Date: 2013-01-18 16:52:12 UTC

releasing version 1.69ubuntu1

Author: Stéphane Graber
Revision Date: 2013-01-18 11:52:10 UTC

* Merge from Debian. Remaining changes: (LP: #1085756)
  - Make /etc/resolv.conf a relative symlink so that it works when
    setting up chroots.
  - Instead of throwing an error that aborts the upgrade when
    /etc/resolv.conf is immutable, pop a debconf error message to let the
    user know what's happening, then clear the immutable flag and continue
    with the installation. LP: #989585.
  - debian/config, debian/templates, debian/postinst: if we don't know that
    /etc/resolv.conf was being dynamically managed before install (in at
    least some cases), link the original contents of /etc/resolv.conf to
    /etc/resolvconf/resolv.conf.d/tail so that any statically configured
    nameservers aren't lost. LP: #923685.
  - Use an upstart job instead of sysvinit script.
  - Pre-Depend on the /run-providing version of initscripts instead of
    depending, so that the preinst does the right thing when creating
    /run/resolvconf/interfaces instead of getting clobbered later by a bind
    mount on initscripts upgrade. LP: #922491.
  - Completely drop the standard_run_subdirs_created helper function from
    debian/postinst, since it serves no purpose here.
  - postinst: Set resolvconf/linkify-resolvconf to false after initial
    conversion, ensuring upgrades won't convert /etc/resolv.conf to
    a symlink if the user manually converted it back to plain text.
    (LP: #922677)
  - Move the #DEBHELPER# token in debian/postinst to after the resolv.conf
    symlink is set, so the init script can actually start (since it expects
    /etc/resolv.conf to be a symlink).
  - Eliminate all references to /etc/resolvconf/run. This should all be done
    directly in /run, there is no reason to support making any of this
    configurable with a symlink since we already have a versioned dependency
    on the version of initscripts that introduces the /run transition.
  - Also remove debian/triggers to avoid needlessly calling resolvconf's
    postinst. (LP: #931335)
* Fix previous mis-merge of debian/postinst as well as the few other comments
  from the bug report. (LP: #1085862)

Author: Stéphane Graber
Revision Date: 2013-01-18 16:52:12 UTC

releasing version 1.69ubuntu1

Author: Stéphane Graber
Revision Date: 2012-09-07 22:02:13 UTC

releasing version 1.67ubuntu2

Author: Stéphane Graber
Revision Date: 2012-09-07 18:03:35 UTC

Update ppp hooks to also exit when passed
/org/freedesktop/NetworkManager/PPP/(LP: #994575)

Author: Stéphane Graber
Revision Date: 2012-09-07 18:03:35 UTC

Update ppp hooks to also exit when passed
/org/freedesktop/NetworkManager/PPP/(LP: #994575)

Author: Steve Langasek
Revision Date: 2012-05-06 19:28:31 UTC

Fix syntax of db_input command, which is part of why we're seeing
failures in bug #994539.

Author: Stéphane Graber
Revision Date: 2012-03-29 20:40:06 UTC

releasing version 1.63ubuntu11

Author: Bhavani Shankar
Revision Date: 2011-01-13 19:22:32 UTC

* Merge from debian unstable. Remaining changes:
  - bin/resolvconf:
    + fail with non-zero exit code when /etc/resolv.conf is not a symlink.
  - debian/postinst:
    + use default /var/run.
    + make sure all run files are sent to /var/run, not /lib/init/rw
    + update regex to check that /var/run is a tmpfs (LP: #386822)
    + fix typo in comments
  - debian/rules:
    + don't install the init script in runlevels 0 and 6.
  - debian/postrm:
    + remove /var/run/resolvconf, not /lib/init/rw/resolvconf
    + also purge /var/run/resolvconf/interface

Author: Bhavani Shankar
Revision Date: 2011-01-13 19:22:32 UTC

* Merge from debian unstable. Remaining changes:
  - bin/resolvconf:
    + fail with non-zero exit code when /etc/resolv.conf is not a symlink.
  - debian/postinst:
    + use default /var/run.
    + make sure all run files are sent to /var/run, not /lib/init/rw
    + update regex to check that /var/run is a tmpfs (LP: #386822)
    + fix typo in comments
  - debian/rules:
    + don't install the init script in runlevels 0 and 6.
  - debian/postrm:
    + remove /var/run/resolvconf, not /lib/init/rw/resolvconf
    + also purge /var/run/resolvconf/interface

Author: Lorenzo De Liso
Revision Date: 2010-07-13 19:35:38 UTC

* Merge from debian unstable (LP: #605116), remaining changes:
  - bin/resolvconf:
    + fail with non-zero exit code when /etc/resolv.conf is not a symlink.
  - debian/postinst:
    + use default /var/run.
    + make sure all run files are sent to /var/run, not /lib/init/rw
    + update regex to check that /var/run is a tmpfs (LP: #386822)
    + fix typo in comments
  - debian/rules:
    + don't install the init script in runlevels 0 and 6.
  - debian/postrm:
    + remove /var/run/resolvconf, not /lib/init/rw/resolvconf
    + also purge /var/run/resolvconf/interface

Author: Mathieu Trudel-Lapierre
Revision Date: 2009-12-30 16:17:58 UTC

* Merge from debian unstable, remaining changes (LP: #495998):
  - bin/resolvconf:
    + fail with non-zero exit code when /etc/resolv.conf is not a symlink.
  - debian/postinst:
    + use default /var/run.
  - debian/rules:
    + don't install the init script in runlevels 0 and 6.
* debian/postinst:
  - make sure all run files are sent to /var/run, not /lib/init/rw
  - update regex to check that /var/run is a tmpfs (LP: #386822)
  - fix typo in comments
* debian/postrm:
  - remove /var/run/resolvconf, not /lib/init/rw/resolvconf
  - also purge /var/run/resolvconf/interface

Author: Nick Ellery
Revision Date: 2008-12-07 15:12:34 UTC

* Merge from debian unstable, remaining changes (LP: #306092):
  - bin/resolvconf:
    + fail with non-zero exit code when /etc/resolv.conf is not a symlink.
  - debian/postinst:
    + use default /var/run.
  - debian/rules:
    + don't install the init script in runlevels 0 and 6.

Author: Alexander Sack
Revision Date: 2008-09-10 10:08:56 UTC

bin/resolvconf: fail with non-zero exit code when /etc/resolv.conf is not
a symlink. This allows network-manager to recognize such an error and
fallback to default behaviour when resolvconf is installed, but is not
used.

Author: Emanuele Gentili
Revision Date: 2008-01-13 01:36:43 UTC

* Merge from debian unstable, remaining changes (LP: #182433):
  - use /var/run instead of /dev/shm
  - debian/rules: don't install the init script in runlevels 0 and 6

Author: Michael Bienia
Revision Date: 2006-12-19 14:19:02 UTC

* Merge from debian unstable, remaining changes:
  - use /var/run instead of /dev/shm
  - debian/rules: don't install the init script in runlevels 0 and 6

Author: Michael Bienia
Revision Date: 2006-12-19 14:19:02 UTC

* Merge from debian unstable, remaining changes:
  - use /var/run instead of /dev/shm
  - debian/rules: don't install the init script in runlevels 0 and 6

Author: Daniel T Chen
Revision Date: 2006-09-20 03:12:20 UTC

[ William Alexander Grant ]
* Readded patch to use /var/run rather than /dev/shm (it was lost in a sync
  a while back)
(Closes Ubuntu: #61310).

[ Daniel T. Chen ]
* debian/rules: Follow multiuser semantics for dh_installinit(1) --
  that is, we don't need to save anything for runlevels 0 or 6, so
  don't create those symlinks.

Author: Sebastian Kapfer
Revision Date: 2006-04-07 01:35:22 UTC

Fixed /dev/shm migration from breezy. Thanks to Elias Oltmanns. (Closes:
M#38009)

Author: Thomas Hood
Revision Date: 2005-06-14 20:00:00 UTC

* /lib/resolvconf/list-records: Enable extglob and clean up a tad
* Add ja.po (Closes: #310211) Thanks to Hideki Yamane
* Fix typos in de.po (Closes: #313818) Thanks to Jens Seidel
* Eliminate preinst. We now support upgrades only from the sarge
  (1.28) or later versions.
* Reject initial hyphen in record name (Closes: #309153)
* /etc/resolvconf/interface-order:
  + Don't match lo.pdns and lo.pdns-recursor prior to the catch-all
    line (See #308677 for background.)

Author: Thomas Hood
Revision Date: 2004-10-19 08:14:56 UTC

* Treat the domain option just like the search option
  (Closes: #276960)
* Tweak README (Closes: #277158)

Author: Thomas Hood
Revision Date: 2004-06-04 09:33:39 UTC

* /sbin/resolvconf:
  + Tweak -d case
* /lib/resolvconf/list-records
  + Only return names of nonempty files
* /etc/resolvconf/update.d/bind:
  + Try to reload both bind9 and bind
* /etc/resolvconf/update.d/libc:
  + Support nscd. If nscd is installed and running and /etc/resolv.conf
    has changed then restart nscd and run update-libc.d/ scripts with
    an '--nscd' option which will allow some of them (e.g., fetchmail)
    to decide not to do anything.
    (Closes: #48976, #60771, #69256, #252251, #252283)
* /etc/resolvconf/interface-order
  + Order lo for the different nameservers in case more than one of them
    is running
* README:
  + Add note about -n
* debian/control:
  + Remove unused '${shlibs:Depends}' from Depends: line
* debian/po/de.po
  + Added. Thanks to Helge Kreutzmann! (Closes: #253587)

Author: Nick Ellery
Revision Date: 2009-06-04 16:38:43 UTC

* Merge from debian unstable, remaining changes (LP: #384131):
  - bin/resolvconf:
    + fail with non-zero exit code when /etc/resolv.conf is not a symlink.
  - debian/postinst:
    + use default /var/run.
  - debian/rules:
    + don't install the init script in runlevels 0 and 6.