RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'd0e472f068a23bfbafac6956e10892033fd8cb9b', '/home/buildd/filecache-default/25121a7572f17d65ba7d4c7db29be92bd6e19436'] Synching the system clock with the buildd NTP service... 20 Feb 03:01:37 ntpdate[6357]: adjust time server 10.211.37.1 offset 0.000501 sec Unpacking chroot for build d0e472f068a23bfbafac6956e10892033fd8cb9b RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'd0e472f068a23bfbafac6956e10892033fd8cb9b'] Mounting chroot for build d0e472f068a23bfbafac6956e10892033fd8cb9b RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'd0e472f068a23bfbafac6956e10892033fd8cb9b', 'deb http://ftpmaster.internal/ubuntu natty main universe'] Overriding sources.list in build-d0e472f068a23bfbafac6956e10892033fd8cb9b RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'd0e472f068a23bfbafac6956e10892033fd8cb9b', 'i386'] Updating debian chroot for build d0e472f068a23bfbafac6956e10892033fd8cb9b Get:1 http://ftpmaster.internal natty Release.gpg [198 B] Ign http://ftpmaster.internal/ubuntu/ natty/main Translation-en Ign http://ftpmaster.internal/ubuntu/ natty/universe Translation-en Get:2 http://ftpmaster.internal natty Release [39.8 kB] Get:3 http://ftpmaster.internal natty/main i386 Packages [1569 kB] Get:4 http://ftpmaster.internal natty/universe i386 Packages [6025 kB] Fetched 7633 kB in 2s (3327 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: apt apt-transport-https binutils bsdutils busybox-initramfs cpp-4.5 dpkg dpkg-dev findutils g++-4.5 gcc-4.5 gcc-4.5-base initramfs-tools initramfs-tools-bin klibc-utils libblkid1 libc-bin libc-dev-bin libc6 libc6-dev libdb4.8 libdpkg-perl libgcc1 libgcrypt11 libglib2.0-0 libgomp1 libgssapi-krb5-2 libk5crypto3 libklibc libkrb5-3 libkrb5support0 libnih-dbus1 libnih1 libpam-modules libpam-runtime libpam0g libpcre3 libplymouth2 libssl0.9.8 libstdc++6 libstdc++6-4.5-dev libudev0 libuuid1 linux-libc-dev login mount mountall netbase openssl passwd perl perl-base perl-modules plymouth tzdata udev upstart util-linux 58 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 51.9 MB of archives. After this operation, 1634 kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! dpkg findutils login mount perl-modules libnih-dbus1 libnih1 libc6-dev libc-dev-bin libc-bin libc6 linux-libc-dev libgomp1 gcc-4.5-base libgcc1 cpp-4.5 libstdc++6-4.5-dev g++-4.5 gcc-4.5 libstdc++6 binutils tzdata libdb4.8 perl perl-base libudev0 libpcre3 libglib2.0-0 initramfs-tools initramfs-tools-bin klibc-utils libklibc busybox-initramfs util-linux udev plymouth libplymouth2 mountall upstart bsdutils libpam-modules apt libpam0g passwd libuuid1 libblkid1 libpam-runtime libssl0.9.8 netbase apt-transport-https libgcrypt11 libk5crypto3 libgssapi-krb5-2 libkrb5-3 libkrb5support0 openssl dpkg-dev libdpkg-perl Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ natty/main dpkg i386 1.15.8.10ubuntu1 [2002 kB] Get:2 http://ftpmaster.internal/ubuntu/ natty/main findutils i386 4.4.2-1ubuntu3 [302 kB] Get:3 http://ftpmaster.internal/ubuntu/ natty/main login i386 1:4.1.4.2+svn3283-2ubuntu3 [279 kB] Get:4 http://ftpmaster.internal/ubuntu/ natty/main mount i386 2.17.2-9.1ubuntu2 [125 kB] Get:5 http://ftpmaster.internal/ubuntu/ natty/main perl-modules all 5.10.1-17ubuntu3 [3443 kB] Get:6 http://ftpmaster.internal/ubuntu/ natty/main libnih-dbus1 i386 1.0.3-1ubuntu1 [13.1 kB] Get:7 http://ftpmaster.internal/ubuntu/ natty/main libnih1 i386 1.0.3-1ubuntu1 [45.8 kB] Get:8 http://ftpmaster.internal/ubuntu/ natty/main libc6-dev i386 2.13-0ubuntu1 [4827 kB] Get:9 http://ftpmaster.internal/ubuntu/ natty/main libc-dev-bin i386 2.13-0ubuntu1 [77.4 kB] Get:10 http://ftpmaster.internal/ubuntu/ natty/main libc-bin i386 2.13-0ubuntu1 [906 kB] Get:11 http://ftpmaster.internal/ubuntu/ natty/main libc6 i386 2.13-0ubuntu1 [3664 kB] Get:12 http://ftpmaster.internal/ubuntu/ natty/main linux-libc-dev i386 2.6.38-4.31 [773 kB] Get:13 http://ftpmaster.internal/ubuntu/ natty/main libgomp1 i386 4.5.2-3ubuntu1 [24.0 kB] Get:14 http://ftpmaster.internal/ubuntu/ natty/main gcc-4.5-base i386 4.5.2-3ubuntu1 [11.9 kB] Get:15 http://ftpmaster.internal/ubuntu/ natty/main libgcc1 i386 1:4.5.2-3ubuntu1 [51.5 kB] Get:16 http://ftpmaster.internal/ubuntu/ natty/main cpp-4.5 i386 4.5.2-3ubuntu1 [4146 kB] Get:17 http://ftpmaster.internal/ubuntu/ natty/main libstdc++6-4.5-dev i386 4.5.2-3ubuntu1 [1527 kB] Get:18 http://ftpmaster.internal/ubuntu/ natty/main g++-4.5 i386 4.5.2-3ubuntu1 [5501 kB] Get:19 http://ftpmaster.internal/ubuntu/ natty/main gcc-4.5 i386 4.5.2-3ubuntu1 [6868 kB] Get:20 http://ftpmaster.internal/ubuntu/ natty/main libstdc++6 i386 4.5.2-3ubuntu1 [333 kB] Get:21 http://ftpmaster.internal/ubuntu/ natty/main binutils i386 2.21.0.20110216-1ubuntu1 [2171 kB] Get:22 http://ftpmaster.internal/ubuntu/ natty/main tzdata all 2011b-2 [673 kB] Get:23 http://ftpmaster.internal/ubuntu/ natty/main libdb4.8 i386 4.8.30-5 [657 kB] Get:24 http://ftpmaster.internal/ubuntu/ natty/main perl i386 5.10.1-17ubuntu3 [3749 kB] Get:25 http://ftpmaster.internal/ubuntu/ natty/main perl-base i386 5.10.1-17ubuntu3 [928 kB] Get:26 http://ftpmaster.internal/ubuntu/ natty/main libudev0 i386 166-0ubuntu1 [26.7 kB] Get:27 http://ftpmaster.internal/ubuntu/ natty/main libpcre3 i386 8.12-1 [179 kB] Get:28 http://ftpmaster.internal/ubuntu/ natty/main libglib2.0-0 i386 2.28.0-0ubuntu1 [968 kB] Get:29 http://ftpmaster.internal/ubuntu/ natty/main initramfs-tools all 0.98.8ubuntu2 [52.3 kB] Get:30 http://ftpmaster.internal/ubuntu/ natty/main initramfs-tools-bin i386 0.98.8ubuntu2 [10.8 kB] Get:31 http://ftpmaster.internal/ubuntu/ natty/main klibc-utils i386 1.5.20-1ubuntu1 [142 kB] Get:32 http://ftpmaster.internal/ubuntu/ natty/main libklibc i386 1.5.20-1ubuntu1 [42.1 kB] Get:33 http://ftpmaster.internal/ubuntu/ natty/main busybox-initramfs i386 1:1.17.1-8ubuntu3 [148 kB] Get:34 http://ftpmaster.internal/ubuntu/ natty/main util-linux i386 2.17.2-9.1ubuntu2 [481 kB] Get:35 http://ftpmaster.internal/ubuntu/ natty/main udev i386 166-0ubuntu1 [340 kB] Get:36 http://ftpmaster.internal/ubuntu/ natty/main plymouth i386 0.8.2-2ubuntu17 [112 kB] Get:37 http://ftpmaster.internal/ubuntu/ natty/main libplymouth2 i386 0.8.2-2ubuntu17 [79.4 kB] Get:38 http://ftpmaster.internal/ubuntu/ natty/main mountall i386 2.21 [44.3 kB] Get:39 http://ftpmaster.internal/ubuntu/ natty/main upstart i386 0.6.7-7 [189 kB] Get:40 http://ftpmaster.internal/ubuntu/ natty/main bsdutils i386 1:2.17.2-9.1ubuntu2 [31.4 kB] Get:41 http://ftpmaster.internal/ubuntu/ natty/main libpam-modules i386 1.1.2-2ubuntu1 [290 kB] Get:42 http://ftpmaster.internal/ubuntu/ natty/main apt i386 0.8.11.5ubuntu1 [2036 kB] Get:43 http://ftpmaster.internal/ubuntu/ natty/main libpam0g i386 1.1.2-2ubuntu1 [52.2 kB] Get:44 http://ftpmaster.internal/ubuntu/ natty/main passwd i386 1:4.1.4.2+svn3283-2ubuntu3 [872 kB] Get:45 http://ftpmaster.internal/ubuntu/ natty/main libuuid1 i386 2.17.2-9.1ubuntu2 [13.1 kB] Get:46 http://ftpmaster.internal/ubuntu/ natty/main libblkid1 i386 2.17.2-9.1ubuntu2 [60.3 kB] Get:47 http://ftpmaster.internal/ubuntu/ natty/main libpam-runtime all 1.1.2-2ubuntu1 [42.4 kB] Get:48 http://ftpmaster.internal/ubuntu/ natty/main libssl0.9.8 i386 0.9.8o-4ubuntu2 [756 kB] Get:49 http://ftpmaster.internal/ubuntu/ natty/main netbase all 4.45ubuntu1 [14.8 kB] Get:50 http://ftpmaster.internal/ubuntu/ natty/main apt-transport-https i386 0.8.11.5ubuntu1 [21.1 kB] Get:51 http://ftpmaster.internal/ubuntu/ natty/main libgcrypt11 i386 1.4.6-4 [250 kB] Get:52 http://ftpmaster.internal/ubuntu/ natty/main libk5crypto3 i386 1.8.3+dfsg-4ubuntu1 [76.5 kB] Get:53 http://ftpmaster.internal/ubuntu/ natty/main libgssapi-krb5-2 i386 1.8.3+dfsg-4ubuntu1 [100 kB] Get:54 http://ftpmaster.internal/ubuntu/ natty/main libkrb5-3 i386 1.8.3+dfsg-4ubuntu1 [327 kB] Get:55 http://ftpmaster.internal/ubuntu/ natty/main libkrb5support0 i386 1.8.3+dfsg-4ubuntu1 [22.0 kB] Get:56 http://ftpmaster.internal/ubuntu/ natty/main openssl i386 0.9.8o-4ubuntu2 [398 kB] Get:57 http://ftpmaster.internal/ubuntu/ natty/main dpkg-dev all 1.15.8.10ubuntu1 [473 kB] Get:58 http://ftpmaster.internal/ubuntu/ natty/main libdpkg-perl all 1.15.8.10ubuntu1 [179 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 51.9 MB in 1s (43.1 MB/s) (Reading database ... 13677 files and directories currently installed.) Preparing to replace dpkg 1.15.8.7ubuntu2 (using .../dpkg_1.15.8.10ubuntu1_i386.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.8.10ubuntu1) ... (Reading database ... 13677 files and directories currently installed.) Preparing to replace findutils 4.4.2-1ubuntu2 (using .../findutils_4.4.2-1ubuntu3_i386.deb) ... Unpacking replacement findutils ... Setting up findutils (4.4.2-1ubuntu3) ... (Reading database ... 13677 files and directories currently installed.) Preparing to replace login 1:4.1.4.2+svn3283-2ubuntu2 (using .../login_1%3a4.1.4.2+svn3283-2ubuntu3_i386.deb) ... Unpacking replacement login ... Setting up login (1:4.1.4.2+svn3283-2ubuntu3) ... (Reading database ... 13677 files and directories currently installed.) Preparing to replace mount 2.17.2-3.3ubuntu4 (using .../mount_2.17.2-9.1ubuntu2_i386.deb) ... Unpacking replacement mount ... Setting up mount (2.17.2-9.1ubuntu2) ... (Reading database ... 13677 files and directories currently installed.) Preparing to replace perl-modules 5.10.1-17ubuntu1 (using .../perl-modules_5.10.1-17ubuntu3_all.deb) ... Unpacking replacement perl-modules ... Preparing to replace libnih-dbus1 1.0.3-1 (using .../libnih-dbus1_1.0.3-1ubuntu1_i386.deb) ... Unpacking replacement libnih-dbus1 ... Preparing to replace libnih1 1.0.3-1 (using .../libnih1_1.0.3-1ubuntu1_i386.deb) ... Unpacking replacement libnih1 ... Preparing to replace libc6-dev 2.12.1-0ubuntu14 (using .../libc6-dev_2.13-0ubuntu1_i386.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-dev-bin 2.12.1-0ubuntu14 (using .../libc-dev-bin_2.13-0ubuntu1_i386.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc-bin 2.12.1-0ubuntu14 (using .../libc-bin_2.13-0ubuntu1_i386.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.13-0ubuntu1) ... (Reading database ... 13693 files and directories currently installed.) Preparing to replace libc6 2.12.1-0ubuntu14 (using .../libc6_2.13-0ubuntu1_i386.deb) ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc6 (2.13-0ubuntu1) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13693 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.38-1.28 (using .../linux-libc-dev_2.6.38-4.31_i386.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libgomp1 4.5.2-2ubuntu1 (using .../libgomp1_4.5.2-3ubuntu1_i386.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.5-base 4.5.2-2ubuntu1 (using .../gcc-4.5-base_4.5.2-3ubuntu1_i386.deb) ... Unpacking replacement gcc-4.5-base ... Setting up gcc-4.5-base (4.5.2-3ubuntu1) ... (Reading database ... 13696 files and directories currently installed.) Preparing to replace libgcc1 1:4.5.2-2ubuntu1 (using .../libgcc1_1%3a4.5.2-3ubuntu1_i386.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.5.2-3ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13696 files and directories currently installed.) Preparing to replace cpp-4.5 4.5.2-2ubuntu1 (using .../cpp-4.5_4.5.2-3ubuntu1_i386.deb) ... Unpacking replacement cpp-4.5 ... Preparing to replace libstdc++6-4.5-dev 4.5.2-2ubuntu1 (using .../libstdc++6-4.5-dev_4.5.2-3ubuntu1_i386.deb) ... Unpacking replacement libstdc++6-4.5-dev ... Preparing to replace g++-4.5 4.5.2-2ubuntu1 (using .../g++-4.5_4.5.2-3ubuntu1_i386.deb) ... Unpacking replacement g++-4.5 ... Preparing to replace gcc-4.5 4.5.2-2ubuntu1 (using .../gcc-4.5_4.5.2-3ubuntu1_i386.deb) ... Unpacking replacement gcc-4.5 ... Preparing to replace libstdc++6 4.5.2-2ubuntu1 (using .../libstdc++6_4.5.2-3ubuntu1_i386.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.5.2-3ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13696 files and directories currently installed.) Preparing to replace binutils 2.21-5ubuntu1 (using .../binutils_2.21.0.20110216-1ubuntu1_i386.deb) ... Unpacking replacement binutils ... Preparing to replace tzdata 2011a-1 (using .../tzdata_2011b-2_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2011b-2) ... Current default time zone: 'Etc/UTC' Local time is now: Sun Feb 20 03:03:15 UTC 2011. Universal Time is now: Sun Feb 20 03:03:15 UTC 2011. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... 13699 files and directories currently installed.) Preparing to replace libdb4.8 4.8.30-3 (using .../libdb4.8_4.8.30-5_i386.deb) ... Unpacking replacement libdb4.8 ... Setting up libdb4.8 (4.8.30-5) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13699 files and directories currently installed.) Preparing to replace perl 5.10.1-17ubuntu1 (using .../perl_5.10.1-17ubuntu3_i386.deb) ... Unpacking replacement perl ... Preparing to replace perl-base 5.10.1-17ubuntu1 (using .../perl-base_5.10.1-17ubuntu3_i386.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-17ubuntu3) ... (Reading database ... 13699 files and directories currently installed.) Preparing to replace libudev0 165-0ubuntu2 (using .../libudev0_166-0ubuntu1_i386.deb) ... Unpacking replacement libudev0 ... Preparing to replace libpcre3 8.12-0ubuntu2 (using .../libpcre3_8.12-1_i386.deb) ... Unpacking replacement libpcre3 ... Preparing to replace libglib2.0-0 2.27.92-0ubuntu1 (using .../libglib2.0-0_2.28.0-0ubuntu1_i386.deb) ... Unpacking replacement libglib2.0-0 ... Preparing to replace initramfs-tools 0.98.1ubuntu9 (using .../initramfs-tools_0.98.8ubuntu2_all.deb) ... Unpacking replacement initramfs-tools ... Preparing to replace initramfs-tools-bin 0.98.1ubuntu9 (using .../initramfs-tools-bin_0.98.8ubuntu2_i386.deb) ... Unpacking replacement initramfs-tools-bin ... Preparing to replace klibc-utils 1.5.20-1 (using .../klibc-utils_1.5.20-1ubuntu1_i386.deb) ... Unpacking replacement klibc-utils ... Preparing to replace libklibc 1.5.20-1 (using .../libklibc_1.5.20-1ubuntu1_i386.deb) ... Unpacking replacement libklibc ... Preparing to replace busybox-initramfs 1:1.17.1-8ubuntu1 (using .../busybox-initramfs_1%3a1.17.1-8ubuntu3_i386.deb) ... Unpacking replacement busybox-initramfs ... Preparing to replace util-linux 2.17.2-3.3ubuntu4 (using .../util-linux_2.17.2-9.1ubuntu2_i386.deb) ... Unpacking replacement util-linux ... Setting up util-linux (2.17.2-9.1ubuntu2) ... (Reading database ... 13702 files and directories currently installed.) Preparing to replace udev 165-0ubuntu2 (using .../udev_166-0ubuntu1_i386.deb) ... Adding 'local diversion of /sbin/udevadm to /sbin/udevadm.upgrade' Unpacking replacement udev ... Preparing to replace plymouth 0.8.2-2ubuntu13 (using .../plymouth_0.8.2-2ubuntu17_i386.deb) ... Unpacking replacement plymouth ... Preparing to replace libplymouth2 0.8.2-2ubuntu13 (using .../libplymouth2_0.8.2-2ubuntu17_i386.deb) ... Unpacking replacement libplymouth2 ... Preparing to replace mountall 2.20+nmu1 (using .../mountall_2.21_i386.deb) ... Unpacking replacement mountall ... Preparing to replace upstart 0.6.7-5 (using .../upstart_0.6.7-7_i386.deb) ... Unpacking replacement upstart ... Preparing to replace bsdutils 1:2.17.2-3.3ubuntu4 (using .../bsdutils_1%3a2.17.2-9.1ubuntu2_i386.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.17.2-9.1ubuntu2) ... (Reading database ... 13705 files and directories currently installed.) Preparing to replace libpam-modules 1.1.1-4ubuntu2 (using .../libpam-modules_1.1.2-2ubuntu1_i386.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.2-2ubuntu1) ... Installing new version of config file /etc/security/group.conf ... (Reading database ... 13705 files and directories currently installed.) Preparing to replace apt 0.8.10ubuntu1 (using .../apt_0.8.11.5ubuntu1_i386.deb) ... Unpacking replacement apt ... Setting up apt (0.8.11.5ubuntu1) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key 437D05B5: "Ubuntu Archive Automatic Signing Key " not changed gpg: key FBB75451: "Ubuntu CD Image Automatic Signing Key " not changed gpg: Total number processed: 2 gpg: unchanged: 2 Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13705 files and directories currently installed.) Preparing to replace libpam0g 1.1.1-4ubuntu2 (using .../libpam0g_1.1.2-2ubuntu1_i386.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.2-2ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13705 files and directories currently installed.) Preparing to replace passwd 1:4.1.4.2+svn3283-2ubuntu2 (using .../passwd_1%3a4.1.4.2+svn3283-2ubuntu3_i386.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.4.2+svn3283-2ubuntu3) ... (Reading database ... 13705 files and directories currently installed.) Preparing to replace libuuid1 2.17.2-3.3ubuntu4 (using .../libuuid1_2.17.2-9.1ubuntu2_i386.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.17.2-9.1ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13705 files and directories currently installed.) Preparing to replace libblkid1 2.17.2-3.3ubuntu4 (using .../libblkid1_2.17.2-9.1ubuntu2_i386.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.17.2-9.1ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13705 files and directories currently installed.) Preparing to replace libpam-runtime 1.1.1-4ubuntu2 (using .../libpam-runtime_1.1.2-2ubuntu1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.2-2ubuntu1) ... (Reading database ... 13705 files and directories currently installed.) Preparing to replace libssl0.9.8 0.9.8o-4ubuntu1 (using .../libssl0.9.8_0.9.8o-4ubuntu2_i386.deb) ... Unpacking replacement libssl0.9.8 ... Setting up libssl0.9.8 (0.9.8o-4ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 13705 files and directories currently installed.) Preparing to replace netbase 4.44ubuntu1 (using .../netbase_4.45ubuntu1_all.deb) ... Unpacking replacement netbase ... Preparing to replace apt-transport-https 0.8.10ubuntu1 (using .../apt-transport-https_0.8.11.5ubuntu1_i386.deb) ... Unpacking replacement apt-transport-https ... Preparing to replace libgcrypt11 1.4.5-2ubuntu2 (using .../libgcrypt11_1.4.6-4_i386.deb) ... Unpacking replacement libgcrypt11 ... Preparing to replace libk5crypto3 1.8.3+dfsg-4 (using .../libk5crypto3_1.8.3+dfsg-4ubuntu1_i386.deb) ... Unpacking replacement libk5crypto3 ... Preparing to replace libgssapi-krb5-2 1.8.3+dfsg-4 (using .../libgssapi-krb5-2_1.8.3+dfsg-4ubuntu1_i386.deb) ... Unpacking replacement libgssapi-krb5-2 ... Preparing to replace libkrb5-3 1.8.3+dfsg-4 (using .../libkrb5-3_1.8.3+dfsg-4ubuntu1_i386.deb) ... Unpacking replacement libkrb5-3 ... Preparing to replace libkrb5support0 1.8.3+dfsg-4 (using .../libkrb5support0_1.8.3+dfsg-4ubuntu1_i386.deb) ... Unpacking replacement libkrb5support0 ... Preparing to replace openssl 0.9.8o-4ubuntu1 (using .../openssl_0.9.8o-4ubuntu2_i386.deb) ... Unpacking replacement openssl ... Preparing to replace dpkg-dev 1.15.8.7ubuntu2 (using .../dpkg-dev_1.15.8.10ubuntu1_all.deb) ... Unpacking replacement dpkg-dev ... Preparing to replace libdpkg-perl 1.15.8.7ubuntu2 (using .../libdpkg-perl_1.15.8.10ubuntu1_all.deb) ... Unpacking replacement libdpkg-perl ... Setting up libnih1 (1.0.3-1ubuntu1) ... Setting up libnih-dbus1 (1.0.3-1ubuntu1) ... Setting up libc-dev-bin (2.13-0ubuntu1) ... Setting up linux-libc-dev (2.6.38-4.31) ... Setting up libc6-dev (2.13-0ubuntu1) ... Setting up libgomp1 (4.5.2-3ubuntu1) ... Setting up cpp-4.5 (4.5.2-3ubuntu1) ... Setting up binutils (2.21.0.20110216-1ubuntu1) ... Setting up gcc-4.5 (4.5.2-3ubuntu1) ... Setting up libudev0 (166-0ubuntu1) ... Setting up libpcre3 (8.12-1) ... Setting up libglib2.0-0 (2.28.0-0ubuntu1) ... Setting up initramfs-tools-bin (0.98.8ubuntu2) ... Setting up libklibc (1.5.20-1ubuntu1) ... Setting up klibc-utils (1.5.20-1ubuntu1) ... Setting up busybox-initramfs (1:1.17.1-8ubuntu3) ... Setting up libplymouth2 (0.8.2-2ubuntu17) ... Setting up apt-transport-https (0.8.11.5ubuntu1) ... Setting up libgcrypt11 (1.4.6-4) ... Setting up libkrb5support0 (1.8.3+dfsg-4ubuntu1) ... Setting up libk5crypto3 (1.8.3+dfsg-4ubuntu1) ... Setting up libkrb5-3 (1.8.3+dfsg-4ubuntu1) ... Setting up libgssapi-krb5-2 (1.8.3+dfsg-4ubuntu1) ... Setting up openssl (0.9.8o-4ubuntu2) ... Setting up perl-modules (5.10.1-17ubuntu3) ... Setting up libstdc++6-4.5-dev (4.5.2-3ubuntu1) ... Setting up mountall (2.21) ... Installing new version of config file /etc/init/mounted-tmp.conf ... Setting up upstart (0.6.7-7) ... Setting up udev (166-0ubuntu1) ... Removing 'local diversion of /sbin/udevadm to /sbin/udevadm.upgrade' update-initramfs: deferring update (trigger activated) Setting up initramfs-tools (0.98.8ubuntu2) ... update-initramfs: deferring update (trigger activated) Setting up netbase (4.45ubuntu1) ... Installing new version of config file /etc/protocols ... Installing new version of config file /etc/services ... Setting up perl (5.10.1-17ubuntu3) ... Setting up g++-4.5 (4.5.2-3ubuntu1) ... Setting up plymouth (0.8.2-2ubuntu17) ... update-initramfs: deferring update (trigger activated) Setting up libdpkg-perl (1.15.8.10ubuntu1) ... Setting up dpkg-dev (1.15.8.10ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Processing triggers for initramfs-tools ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'd0e472f068a23bfbafac6956e10892033fd8cb9b', 'i386', 'natty', '--nolog', '--batch', '--archive=ubuntu', '--dist=natty', '-A', '--purpose=PRIMARY', '--architecture=i386', '--comp=universe', 'pythoncad_0.1.37.0-3.dsc'] Initiating build d0e472f068a23bfbafac6956e10892033fd8cb9b with 8 processor cores. Automatic build of pythoncad_0.1.37.0-3 on roseapple by sbuild/i386 1.170.5 Build started at 20110220-0304 ****************************************************************************** pythoncad_0.1.37.0-3.dsc exists in cwd sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 7.3.0) Build-Depends-Indep: python (>= 2.6.6-3~) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) Checking for already installed source dependencies... debhelper: missing python: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper python Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils file gettext gettext-base groff-base html2text intltool-debian libcroco3 libexpat1 libmagic1 libpipeline1 libsqlite3-0 libunistring0 libxml2 man-db mime-support po-debconf python2.7 Suggested packages: wamerican wordlist whois vacation dh-make gettext-doc groff less www-browser libmail-box-perl python-doc python-tk python-profiler python2.7-doc python2.7-profiler Recommended packages: curl wget lynx-cur xml-core libmail-sendmail-perl The following NEW packages will be installed: bsdmainutils debhelper file gettext gettext-base groff-base html2text intltool-debian libcroco3 libexpat1 libmagic1 libpipeline1 libsqlite3-0 libunistring0 libxml2 man-db mime-support po-debconf python python2.7 0 upgraded, 20 newly installed, 0 to remove and 0 not upgraded. Need to get 8459 kB of archives. After this operation, 30.0 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file libexpat1 libsqlite3-0 mime-support python2.7 python bsdmainutils gettext-base groff-base libpipeline1 libxml2 man-db html2text libcroco3 libunistring0 gettext intltool-debian po-debconf debhelper Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ natty/main libmagic1 i386 5.04-5ubuntu2 [204 kB] Get:2 http://ftpmaster.internal/ubuntu/ natty/main file i386 5.04-5ubuntu2 [22.1 kB] Get:3 http://ftpmaster.internal/ubuntu/ natty/main libexpat1 i386 2.0.1-7ubuntu1 [139 kB] Get:4 http://ftpmaster.internal/ubuntu/ natty/main libsqlite3-0 i386 3.7.4-2ubuntu2 [308 kB] Get:5 http://ftpmaster.internal/ubuntu/ natty/main mime-support all 3.51-1ubuntu1 [30.7 kB] Get:6 http://ftpmaster.internal/ubuntu/ natty/main python2.7 i386 2.7.1-3 [2497 kB] Get:7 http://ftpmaster.internal/ubuntu/ natty/main python all 2.7.1-0ubuntu5 [163 kB] Get:8 http://ftpmaster.internal/ubuntu/ natty/main bsdmainutils i386 8.2.2 [191 kB] Get:9 http://ftpmaster.internal/ubuntu/ natty/main gettext-base i386 0.18.1.1-3ubuntu1 [56.6 kB] Get:10 http://ftpmaster.internal/ubuntu/ natty/main groff-base i386 1.21-3 [1021 kB] Get:11 http://ftpmaster.internal/ubuntu/ natty/main libpipeline1 i386 1.1.0-1 [23.1 kB] Get:12 http://ftpmaster.internal/ubuntu/ natty/main libxml2 i386 2.7.8.dfsg-2 [607 kB] Get:13 http://ftpmaster.internal/ubuntu/ natty/main man-db i386 2.5.9-3 [676 kB] Get:14 http://ftpmaster.internal/ubuntu/ natty/main html2text i386 1.3.2a-15 [101 kB] Get:15 http://ftpmaster.internal/ubuntu/ natty/main libcroco3 i386 0.6.2-1 [92.5 kB] Get:16 http://ftpmaster.internal/ubuntu/ natty/main libunistring0 i386 0.9.3-3 [423 kB] Get:17 http://ftpmaster.internal/ubuntu/ natty/main gettext i386 0.18.1.1-3ubuntu1 [1180 kB] Get:18 http://ftpmaster.internal/ubuntu/ natty/main intltool-debian all 0.35.0+20060710.1 [31.6 kB] Get:19 http://ftpmaster.internal/ubuntu/ natty/main po-debconf all 1.0.16+nmu1 [212 kB] Get:20 http://ftpmaster.internal/ubuntu/ natty/main debhelper all 8.1.2ubuntu1 [479 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 8459 kB in 0s (30.1 MB/s) Selecting previously deselected package libmagic1. (Reading database ... 13704 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_5.04-5ubuntu2_i386.deb) ... Selecting previously deselected package file. Unpacking file (from .../file_5.04-5ubuntu2_i386.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-7ubuntu1_i386.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.7.4-2ubuntu2_i386.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.51-1ubuntu1_all.deb) ... Selecting previously deselected package python2.7. Unpacking python2.7 (from .../python2.7_2.7.1-3_i386.deb) ... Selecting previously deselected package python. Unpacking python (from .../python_2.7.1-0ubuntu5_all.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.2.2_i386.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.18.1.1-3ubuntu1_i386.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.21-3_i386.deb) ... Selecting previously deselected package libpipeline1. Unpacking libpipeline1 (from .../libpipeline1_1.1.0-1_i386.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.8.dfsg-2_i386.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.9-3_i386.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-15_i386.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_i386.deb) ... Selecting previously deselected package libunistring0. Unpacking libunistring0 (from .../libunistring0_0.9.3-3_i386.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.18.1.1-3ubuntu1_i386.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16+nmu1_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_8.1.2ubuntu1_all.deb) ... Setting up libmagic1 (5.04-5ubuntu2) ... Setting up file (5.04-5ubuntu2) ... Setting up libexpat1 (2.0.1-7ubuntu1) ... Setting up libsqlite3-0 (3.7.4-2ubuntu2) ... Setting up mime-support (3.51-1ubuntu1) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode. Setting up python2.7 (2.7.1-3) ... Setting up python (2.7.1-0ubuntu5) ... Setting up bsdmainutils (8.2.2) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode. Setting up gettext-base (0.18.1.1-3ubuntu1) ... Setting up groff-base (1.21-3) ... Setting up libpipeline1 (1.1.0-1) ... Setting up libxml2 (2.7.8.dfsg-2) ... Setting up man-db (2.5.9-3) ... Building database of manual pages ... Setting up html2text (1.3.2a-15) ... Setting up libcroco3 (0.6.2-1) ... Setting up libunistring0 (0.9.3-3) ... Setting up gettext (0.18.1.1-3ubuntu1) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu1) ... Setting up debhelper (8.1.2ubuntu1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.13-0ubuntu1 make_3.81-8 dpkg-dev_1.15.8.10ubuntu1 gcc-4.5_4.5.2-3ubuntu1 g++-4.5_4.5.2-3ubuntu1 binutils_2.21.0.20110216-1ubuntu1 libstdc++6-4.5-dev_4.5.2-3ubuntu1 libstdc++6_4.5.2-3ubuntu1 ------------------------------------------------------------------------------ dpkg-source: warning: -sn is not a valid option for Dpkg::Source::Package::V3::quilt gpgv: Signature made Mon Feb 7 22:59:07 2011 UTC using RSA key ID EBE2F31F gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./pythoncad_0.1.37.0-3.dsc dpkg-source: info: extracting pythoncad in pythoncad-0.1.37.0 dpkg-source: info: unpacking pythoncad_0.1.37.0.orig.tar.gz dpkg-source: info: unpacking pythoncad_0.1.37.0-3.debian.tar.gz dpkg-source: info: applying image_path.patch dpkg-source: info: applying string_exceptions.patch dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package pythoncad dpkg-buildpackage: source version 0.1.37.0-3 dpkg-source --before-build pythoncad-0.1.37.0 dpkg-buildpackage: host architecture i386 /usr/bin/fakeroot debian/rules clean dh clean --with python2 dh_testdir dh_auto_clean running clean 'build/lib.linux-i686-2.7' does not exist -- can't clean it 'build/bdist.linux-i686' does not exist -- can't clean it 'build/scripts-2.7' does not exist -- can't clean it dh_clean debian/rules build dh build --with python2 dh_testdir dh_auto_configure dh_auto_build running build running build_py creating build creating build/lib.linux-i686-2.7 creating build/lib.linux-i686-2.7/PythonCAD copying PythonCAD/__init__.py -> build/lib.linux-i686-2.7/PythonCAD creating build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/message.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/conobject.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/printing.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/fileio.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/entity.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/graphicobject.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/keywords.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/dwgbase.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/polyline.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/ccircle.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/extFormat.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/dxf.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/preferences.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/layer.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/pyGeoLib.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/style.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/dwg1314.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/dwgutil.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/mirror.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/intersections.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/tolerance.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/bindump.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/plotfile.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/leader.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/transfer.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/units.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/acline.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/text.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/tree.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/selections.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/split.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/segment.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/hcline.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/quadtree.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/color.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/globals.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/dwg15.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/__init__.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/dimtrees.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/imageio.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/hatch.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/segjoint.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/linetype.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/dimension.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/vcline.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/move.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/circle.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/util.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/snap.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/ellipse.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/cline.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/logger.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/dwg12.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/point.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/options.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/tangent.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/arc.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/image.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/nurbs.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/prompt.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/maptree.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/rotate.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/delete.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/tools.py -> build/lib.linux-i686-2.7/PythonCAD/Generic copying PythonCAD/Generic/baseobject.py -> build/lib.linux-i686-2.7/PythonCAD/Generic creating build/lib.linux-i686-2.7/PythonCAD/Interface copying PythonCAD/Interface/__init__.py -> build/lib.linux-i686-2.7/PythonCAD/Interface creating build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/CocoaText.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/ImageWindowController.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/CocoaEntities.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/CocoaDimensions.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/LayerView.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/AppController.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/CocoaModify.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/ImageDocument.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/CocoaConobjs.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/CADView.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/__init__.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/Globals.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa copying PythonCAD/Interface/Cocoa/CocoaPrompt.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa creating build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkmenus.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkshell.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkprinting.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkimage.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkmodify.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkdimprefs.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtktext.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkprefs.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkmirror.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/__init__.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtktextprefs.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkDialog.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkinit.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkdimension.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkedit.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkactions.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkentities.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkstyleprefs.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk copying PythonCAD/Interface/Gtk/gtkconobjs.py -> build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk dh_auto_test /usr/bin/fakeroot debian/rules binary dh binary --with python2 dh_testroot dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory `/build/buildd/pythoncad-0.1.37.0' dh_auto_install -- --install-scripts=/usr/share/pythoncad --install-lib=/usr/share/pythoncad running install running build running build_py running install_lib creating /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr creating /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share creating /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad creating /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD creating /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface creating /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkmenus.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkshell.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkprinting.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkimage.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkmodify.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkdimprefs.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtktext.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkprefs.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkmirror.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/__init__.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtktextprefs.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkDialog.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkinit.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkdimension.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkedit.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkactions.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkentities.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkstyleprefs.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk copying build/lib.linux-i686-2.7/PythonCAD/Interface/Gtk/gtkconobjs.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Gtk creating /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/CocoaText.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/ImageWindowController.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/CocoaEntities.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/CocoaDimensions.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/LayerView.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/AppController.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/CocoaModify.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/ImageDocument.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/CocoaConobjs.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/CADView.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/__init__.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/Globals.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/Cocoa/CocoaPrompt.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface/Cocoa copying build/lib.linux-i686-2.7/PythonCAD/Interface/__init__.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Interface copying build/lib.linux-i686-2.7/PythonCAD/__init__.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD creating /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/message.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/conobject.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/printing.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/fileio.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/entity.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/graphicobject.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/keywords.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/dwgbase.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/polyline.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/ccircle.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/extFormat.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/dxf.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/preferences.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/layer.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/pyGeoLib.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/style.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/dwg1314.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/dwgutil.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/mirror.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/intersections.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/tolerance.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/bindump.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/plotfile.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/leader.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/transfer.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/units.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/acline.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/text.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/tree.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/selections.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/split.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/segment.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/hcline.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/quadtree.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/color.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/globals.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/dwg15.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/__init__.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/dimtrees.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/imageio.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/hatch.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/segjoint.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/linetype.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/dimension.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/vcline.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/move.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/circle.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/util.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/snap.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/ellipse.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/cline.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/logger.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/dwg12.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/point.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/options.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/tangent.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/arc.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/image.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/nurbs.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/prompt.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/maptree.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/rotate.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/delete.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/tools.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic copying build/lib.linux-i686-2.7/PythonCAD/Generic/baseobject.py -> /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD/Generic running install_egg_info Writing /build/buildd/pythoncad-0.1.37.0/debian/pythoncad/usr/share/pythoncad/PythonCAD-DS1_R37.egg-info make[1]: Leaving directory `/build/buildd/pythoncad-0.1.37.0' dh_install dh_installdocs debian/rules override_dh_installchangelogs make[1]: Entering directory `/build/buildd/pythoncad-0.1.37.0' dh_installchangelogs NEWS make[1]: Leaving directory `/build/buildd/pythoncad-0.1.37.0' dh_installexamples dh_installman dh_installcatalogs dh_installcron dh_installdebconf dh_installemacsen dh_installifupdown dh_installinfo dh_installinit dh_installmenu dh_installmime dh_installmodules dh_installlogcheck dh_installlogrotate dh_installpam dh_installppp dh_installudev dh_installwm dh_installxfonts dh_bugfiles dh_lintian dh_gconf dh_icons dh_perl dh_python2 dh_usrlocal dh_link dh_compress dh_fixperms dh_strip dh_strip debug symbol extraction: all non-arch-all packages for this build platform i386: dh_strip debug symbol extraction: packages to act on: dh_strip debug symbol extraction: ignored packages: dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb INFO: pkgstriptranslations version 91 pkgstriptranslations: processing control file: ./debian/pythoncad/DEBIAN/control, package pythoncad, directory ./debian/pythoncad ./debian/pythoncad/usr/share/applications/pythoncad.desktop: does not have gettext domain, not stripping pkgstriptranslations: pythoncad does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/pythoncad/DEBIAN/control, package pythoncad, directory debian/pythoncad .. removing usr/share/doc/pythoncad/changelog.gz pkgstripfiles: Truncating changelog to topmost ten records dpkg-deb: warning: 'debian/pythoncad/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `pythoncad' in `../pythoncad_0.1.37.0-3_all.deb'. dpkg-genchanges -b -mUbuntu/amd64 Build Daemon >../pythoncad_0.1.37.0-3_i386.changes dpkg-genchanges: binary-only upload - not including any source code dpkg-source --after-build pythoncad-0.1.37.0 dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20110220-0305 chroot-autobuild/build/buildd/pythoncad_0.1.37.0-3_all.deb: new debian package, version 2.0. size 466344 bytes: control archive= 4128 bytes. 637 bytes, 15 lines control 9423 bytes, 112 lines md5sums 355 bytes, 14 lines * postinst #!/bin/sh 160 bytes, 5 lines * postrm #!/bin/sh 255 bytes, 14 lines * prerm #!/bin/sh Package: pythoncad Version: 0.1.37.0-3 Architecture: all Maintainer: Ubuntu Developers Original-Maintainer: Python Applications Packaging Team Installed-Size: 3472 Depends: python (>= 2.7.1-0ubuntu2), python-gtk2 (>= 1.99.16), python-gobject Section: graphics Priority: optional Homepage: http://sourceforge.net/projects/pythoncad/ Description: Computer Aided Drafting (CAD) program PythonCAD is a scriptable (with the Python language) and easy to use drafting program. . Please note that this version still doesn't support DWG and DXF file formats. chroot-autobuild/build/buildd/pythoncad_0.1.37.0-3_all.deb: drwxr-xr-x root/root 0 2011-02-20 03:05 ./ drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/ drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/bin/ drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/ drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/applications/ -rw-r--r-- root/root 175 2009-12-09 09:28 ./usr/share/applications/pythoncad.desktop drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/doc-base/ -rw-r--r-- root/root 259 2009-08-29 01:31 ./usr/share/doc-base/pythoncad drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/pixmaps/ -rw-r--r-- root/root 2407 2009-12-18 22:10 ./usr/share/pixmaps/gtkpycad.xpm drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/menu/ -rw-r--r-- root/root 170 2009-06-25 14:42 ./usr/share/menu/pythoncad drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/doc/ drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/doc/pythoncad/ -rw-r--r-- root/root 3747 2009-12-09 09:28 ./usr/share/doc/pythoncad/README -rw-r--r-- root/root 1396 2009-10-29 22:27 ./usr/share/doc/pythoncad/copyright -rw-r--r-- root/root 13262 2009-08-29 01:15 ./usr/share/doc/pythoncad/usage.html -rw-r--r-- root/root 7019 2009-08-29 01:15 ./usr/share/doc/pythoncad/commands.html -rw-r--r-- root/root 1688 2011-02-20 03:05 ./usr/share/doc/pythoncad/changelog.Debian.gz drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/man/ drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/man/man1/ -rw-r--r-- root/root 502 2011-02-20 03:05 ./usr/share/man/man1/pythoncad.1.gz drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/pythoncad/ -rwxr-xr-x root/root 9929 2009-12-09 09:28 ./usr/share/pythoncad/gtkpycad.py drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD/ drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD/Interface/ drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/ -rw-r--r-- root/root 106588 2009-12-09 10:14 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkmenus.py -rw-r--r-- root/root 30983 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkshell.py -rw-r--r-- root/root 11031 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkprinting.py -rw-r--r-- root/root 52720 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkimage.py -rw-r--r-- root/root 95000 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkmodify.py -rw-r--r-- root/root 54495 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkdimprefs.py -rw-r--r-- root/root 9753 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtktext.py -rw-r--r-- root/root 106082 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkprefs.py -rw-r--r-- root/root 4955 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkmirror.py -rw-r--r-- root/root 1093 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/__init__.py -rw-r--r-- root/root 25221 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtktextprefs.py -rw-r--r-- root/root 4241 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkDialog.py -rw-r--r-- root/root 55151 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkinit.py -rw-r--r-- root/root 18012 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkdimension.py -rw-r--r-- root/root 18288 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkedit.py -rw-r--r-- root/root 19060 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkactions.py -rw-r--r-- root/root 63658 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkentities.py -rw-r--r-- root/root 20920 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkstyleprefs.py -rw-r--r-- root/root 26863 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Gtk/gtkconobjs.py drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/ -rw-r--r-- root/root 2720 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/CocoaText.py -rw-r--r-- root/root 14439 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/ImageWindowController.py -rw-r--r-- root/root 30616 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/CocoaEntities.py -rw-r--r-- root/root 10964 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/CocoaDimensions.py -rw-r--r-- root/root 3438 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/LayerView.py -rw-r--r-- root/root 19414 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/AppController.py -rw-r--r-- root/root 26327 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/CocoaModify.py -rw-r--r-- root/root 16726 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/ImageDocument.py -rw-r--r-- root/root 25437 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/CocoaConobjs.py -rw-r--r-- root/root 51516 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/CADView.py -rw-r--r-- root/root 1044 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/__init__.py -rw-r--r-- root/root 1659 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/Globals.py -rw-r--r-- root/root 5843 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/Cocoa/CocoaPrompt.py -rw-r--r-- root/root 179 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Interface/__init__.py -rw-r--r-- root/root 92 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/__init__.py drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD/Generic/ -rw-r--r-- root/root 6300 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/message.py -rw-r--r-- root/root 3264 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/conobject.py -rw-r--r-- root/root 32092 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/printing.py -rw-r--r-- root/root 10682 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/fileio.py -rw-r--r-- root/root 21738 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/entity.py -rw-r--r-- root/root 19855 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/graphicobject.py -rw-r--r-- root/root 3304 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/keywords.py -rw-r--r-- root/root 29404 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/dwgbase.py -rw-r--r-- root/root 34206 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/polyline.py -rw-r--r-- root/root 26323 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/ccircle.py -rw-r--r-- root/root 2259 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/extFormat.py -rw-r--r-- root/root 9896 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/dxf.py -rw-r--r-- root/root 66355 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/preferences.py -rw-r--r-- root/root 138088 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/layer.py -rw-r--r-- root/root 4235 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/pyGeoLib.py -rw-r--r-- root/root 6137 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/style.py -rw-r--r-- root/root 177703 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/dwg1314.py -rw-r--r-- root/root 24225 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/dwgutil.py -rw-r--r-- root/root 18612 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/mirror.py -rw-r--r-- root/root 34918 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/intersections.py -rw-r--r-- root/root 4293 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/tolerance.py -rw-r--r-- root/root 1682 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/bindump.py -rw-r--r-- root/root 15711 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/plotfile.py -rw-r--r-- root/root 34340 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/leader.py -rw-r--r-- root/root 13641 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/transfer.py -rw-r--r-- root/root 10290 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/units.py -rw-r--r-- root/root 29285 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/acline.py -rw-r--r-- root/root 58724 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/text.py -rw-r--r-- root/root 11964 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/tree.py -rw-r--r-- root/root 3059 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/selections.py -rw-r--r-- root/root 57981 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/split.py -rw-r--r-- root/root 30766 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/segment.py -rw-r--r-- root/root 16328 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/hcline.py -rw-r--r-- root/root 14468 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/quadtree.py -rw-r--r-- root/root 7302 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/color.py -rw-r--r-- root/root 816 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/globals.py -rw-r--r-- root/root 197666 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/dwg15.py -rw-r--r-- root/root 1699 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/__init__.py -rw-r--r-- root/root 15369 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/dimtrees.py -rw-r--r-- root/root 125904 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/imageio.py -rw-r--r-- root/root 24802 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/hatch.py -rw-r--r-- root/root 31602 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/segjoint.py -rw-r--r-- root/root 7765 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/linetype.py -rw-r--r-- root/root 192059 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/dimension.py -rw-r--r-- root/root 16305 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/vcline.py -rw-r--r-- root/root 19383 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/move.py -rw-r--r-- root/root 73483 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/circle.py -rw-r--r-- root/root 7643 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/util.py -rw-r--r-- root/root 15334 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/snap.py -rw-r--r-- root/root 15574 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/ellipse.py -rw-r--r-- root/root 31690 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/cline.py -rw-r--r-- root/root 3953 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/logger.py -rw-r--r-- root/root 37334 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/dwg12.py -rw-r--r-- root/root 17002 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/point.py -rw-r--r-- root/root 20257 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/options.py -rw-r--r-- root/root 27496 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/tangent.py -rw-r--r-- root/root 39368 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/arc.py -rw-r--r-- root/root 72635 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD/Generic/image.py -rw-r--r-- root/root 7357 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/nurbs.py -rw-r--r-- root/root 5086 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/prompt.py -rw-r--r-- root/root 5544 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/maptree.py -rw-r--r-- root/root 17361 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/rotate.py -rw-r--r-- root/root 4698 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/delete.py -rw-r--r-- root/root 135987 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD/Generic/tools.py -rw-r--r-- root/root 11942 2009-12-09 09:28 ./usr/share/pythoncad/PythonCAD/Generic/baseobject.py -rw-r--r-- root/root 257 2011-02-20 03:05 ./usr/share/pythoncad/PythonCAD-DS1_R37.egg-info drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/python/ drwxr-xr-x root/root 0 2011-02-20 03:05 ./usr/share/python/runtime.d/ -rwxr-xr-x root/root 115 2011-02-20 03:05 ./usr/share/python/runtime.d/pythoncad.rtupdate lrwxrwxrwx root/root 0 2011-02-20 03:05 ./usr/bin/pythoncad -> ../share/pythoncad/gtkpycad.py pythoncad_0.1.37.0-3_i386.changes: Format: 1.8 Date: Mon, 07 Feb 2011 22:43:10 -0500 Source: pythoncad Binary: pythoncad Architecture: all Version: 0.1.37.0-3 Distribution: natty Urgency: low Maintainer: Ubuntu/amd64 Build Daemon Changed-By: Charlie Smotherman Description: pythoncad - Computer Aided Drafting (CAD) program Changes: pythoncad (0.1.37.0-3) unstable; urgency=low . * After a discussion with Luca Falavigna, I am taking over maintenance of the package. * Removed pyversions it is no longer needed. * Updated debian/rules to use dh_python2. * debian/control: - Bump Standards-Version to 3.9.1, no changes required. - Updated Maintainer field with my info. - Updated python and debhelper versions for use with dh_python2. - Added X-P-V. - Updated Homepage field. Checksums-Sha1: 19136c699042947a3b8c8c5e2d6928ef707a74b6 466344 pythoncad_0.1.37.0-3_all.deb Checksums-Sha256: 0a17bc2e7d557a18bc279f18afa7c33a6a6edb5a179648c9de655ad518e4055e 466344 pythoncad_0.1.37.0-3_all.deb Files: e4f8beff951b3ed3db4c845bb696d050 466344 graphics optional pythoncad_0.1.37.0-3_all.deb ****************************************************************************** Built successfully Purging chroot-autobuild/build/buildd/pythoncad-0.1.37.0 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge intltool-debian groff-base python2.7 mime-support gettext file html2text gettext-base debhelper po-debconf libunistring0 python libcroco3 libmagic1 libpipeline1 libexpat1 libxml2 libsqlite3-0 bsdmainutils man-db (Reading database ... 15471 files and directories currently installed.) Removing debhelper ... Removing po-debconf ... Removing python ... Purging configuration files for python ... Removing man-db ... Purging configuration files for man-db ... Removing catpages as well as /var/cache/man hierarchy. Removing intltool-debian ... Removing groff-base ... Purging configuration files for groff-base ... Removing python2.7 ... Purging configuration files for python2.7 ... Removing mime-support ... Purging configuration files for mime-support ... Removing gettext ... Removing file ... Removing html2text ... Purging configuration files for html2text ... Removing gettext-base ... Removing libunistring0 ... Purging configuration files for libunistring0 ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libpipeline1 ... Purging configuration files for libpipeline1 ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20110220-0305 Build needed 00:00:05, 11260k disk space Can't open average time db /var/debbuild/avg-build-times Can't open average space db /var/debbuild/avg-build-space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', 'd0e472f068a23bfbafac6956e10892033fd8cb9b'] Scanning for processes to kill in build /home/buildd/build-d0e472f068a23bfbafac6956e10892033fd8cb9b/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'd0e472f068a23bfbafac6956e10892033fd8cb9b'] Unmounting chroot for build d0e472f068a23bfbafac6956e10892033fd8cb9b... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'd0e472f068a23bfbafac6956e10892033fd8cb9b'] Removing build d0e472f068a23bfbafac6956e10892033fd8cb9b