(In reply to comment #3)
> Default sink name: alsa_output.pci-0000_00_1b.0.hdmi-stereo
> Default source name: alsa_input.usb-046d_08b2-01-U0x46d0x8b2.analog-mono
>
> post output of
>
> pactl list sinks
>
> do the state of your analog outputs are available and higher priority than
> your hdmi ?
Below is what I get when my HDMI cable is plugged in (I usually leave it unplugged to avoid the problem).
(In reply to comment #3) pci-0000_ 00_1b.0. hdmi-stereo usb-046d_ 08b2-01- U0x46d0x8b2. analog- mono
> Default sink name: alsa_output.
> Default source name: alsa_input.
>
> post output of
>
> pactl list sinks
>
> do the state of your analog outputs are available and higher priority than
> your hdmi ?
Below is what I get when my HDMI cable is plugged in (I usually leave it unplugged to avoid the problem).
$ pactl list sinks pci-0000_ 00_1b.0. hdmi-stereo front-right pci-0000_ 00_1b.0. hdmi-stereo. monitor resolution_ bits = "16" subdevice_ name = "subdevice #0" long_card_ name = "HDA Intel PCH at 0xf7c10000 irq 45" pci0000: 00/0000: 00:1b.0/ sound/card0" vendor. name = "Intel Corporation" product. name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" form_factor = "internal" buffering. buffer_ size = "65536" buffering. fragment_ size = "32768" access_ mode = "mmap+timer" profile. name = "hdmi-stereo" profile. description = "Digital Stereo (HDMI)" description = "Built-in Audio Digital Stereo (HDMI)" 1462f758, 00100302 HDA:80862806, 80860101, 00100000" udev-detect. discovered = "1"
Sink #0
State: SUSPENDED
Name: alsa_output.
Description: Built-in Audio Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,
Owner Module: 6
Mute: no
Volume: 0: 45% 1: 45%
0: -20.80 dB 1: -20.80 dB
balance 0.00
Base Volume: 100%
0.00 dB
Monitor Source: alsa_output.
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/
device.bus = "pci"
device.vendor.id = "8086"
device.
device.product.id = "1e20"
device.
device.
device.string = "hdmi:0"
device.
device.
device.
device.
device.
device.
alsa.mixer_name = "Intel PantherPoint HDMI"
alsa.components = "HDA:10ec0892,
module-
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, available)
Active Port: hdmi-output-0
Formats:
pcm