Author: Peter Pentchev
Revision Date: 2014-06-11 16:42:59 UTC

* Add support for control.tar, control.tar.xz, data.tar, data.tar.xz,
  data.tar.bz2 and data.tar.lzma. Closes: #748530
  Submitted by Guillem Jover <guillem@debian.org> (thanks!)
* Bump Standards-Version to 3.9.5 with no changes.
* Convert the copyright file to the 1.0 format and bump the year of
  my copyright notice.
* Remove the source package compression specification, dpkg-dev's
  default is good enough.
* Shorten the short description of the binary package.
* Bump the debhelper compatibility level to 9 with no changes.

Author: Peter Pentchev
Revision Date: 2014-06-11 16:42:59 UTC

* Add support for control.tar, control.tar.xz, data.tar, data.tar.xz,
  data.tar.bz2 and data.tar.lzma. Closes: #748530
  Submitted by Guillem Jover <guillem@debian.org> (thanks!)
* Bump Standards-Version to 3.9.5 with no changes.
* Convert the copyright file to the 1.0 format and bump the year of
  my copyright notice.
* Remove the source package compression specification, dpkg-dev's
  default is good enough.
* Shorten the short description of the binary package.
* Bump the debhelper compatibility level to 9 with no changes.

Author: Peter Pentchev
Revision Date: 2014-06-11 16:42:59 UTC

* Add support for control.tar, control.tar.xz, data.tar, data.tar.xz,
  data.tar.bz2 and data.tar.lzma. Closes: #748530
  Submitted by Guillem Jover <guillem@debian.org> (thanks!)
* Bump Standards-Version to 3.9.5 with no changes.
* Convert the copyright file to the 1.0 format and bump the year of
  my copyright notice.
* Remove the source package compression specification, dpkg-dev's
  default is good enough.
* Shorten the short description of the binary package.
* Bump the debhelper compatibility level to 9 with no changes.

Author: Peter Pentchev
Revision Date: 2014-06-11 16:42:59 UTC

* Add support for control.tar, control.tar.xz, data.tar, data.tar.xz,
  data.tar.bz2 and data.tar.lzma. Closes: #748530
  Submitted by Guillem Jover <guillem@debian.org> (thanks!)
* Bump Standards-Version to 3.9.5 with no changes.
* Convert the copyright file to the 1.0 format and bump the year of
  my copyright notice.
* Remove the source package compression specification, dpkg-dev's
  default is good enough.
* Shorten the short description of the binary package.
* Bump the debhelper compatibility level to 9 with no changes.

Author: Peter Pentchev
Revision Date: 2011-03-01 13:36:29 UTC

* Switch to Git and point the Vcs-* fields to Gitorious.
* Bump Standards-Version to 3.9.1 with no changes.
* Refresh the copyright file:
  - change "Debian GNU/Linux systems" to "Debian systems"
  - update to the latest version of the DEP 5 candidate format
  - bump the year on my copyright notice
* Use bzip2 compression for the tarball.
* Bump the debhelper compatibility level to 8 with no changes.

Author: Peter Pentchev
Revision Date: 2011-03-01 13:36:29 UTC

* Switch to Git and point the Vcs-* fields to Gitorious.
* Bump Standards-Version to 3.9.1 with no changes.
* Refresh the copyright file:
  - change "Debian GNU/Linux systems" to "Debian systems"
  - update to the latest version of the DEP 5 candidate format
  - bump the year on my copyright notice
* Use bzip2 compression for the tarball.
* Bump the debhelper compatibility level to 8 with no changes.

Author: Peter Pentchev
Revision Date: 2011-03-01 13:36:29 UTC

* Switch to Git and point the Vcs-* fields to Gitorious.
* Bump Standards-Version to 3.9.1 with no changes.
* Refresh the copyright file:
  - change "Debian GNU/Linux systems" to "Debian systems"
  - update to the latest version of the DEP 5 candidate format
  - bump the year on my copyright notice
* Use bzip2 compression for the tarball.
* Bump the debhelper compatibility level to 8 with no changes.

Author: Peter Pentchev
Revision Date: 2011-03-01 13:36:29 UTC

* Switch to Git and point the Vcs-* fields to Gitorious.
* Bump Standards-Version to 3.9.1 with no changes.
* Refresh the copyright file:
  - change "Debian GNU/Linux systems" to "Debian systems"
  - update to the latest version of the DEP 5 candidate format
  - bump the year on my copyright notice
* Use bzip2 compression for the tarball.
* Bump the debhelper compatibility level to 8 with no changes.

Author: Peter Pentchev
Revision Date: 2011-03-01 13:36:29 UTC

* Switch to Git and point the Vcs-* fields to Gitorious.
* Bump Standards-Version to 3.9.1 with no changes.
* Refresh the copyright file:
  - change "Debian GNU/Linux systems" to "Debian systems"
  - update to the latest version of the DEP 5 candidate format
  - bump the year on my copyright notice
* Use bzip2 compression for the tarball.
* Bump the debhelper compatibility level to 8 with no changes.

Author: Peter Pentchev
Revision Date: 2011-03-01 13:36:29 UTC

* Switch to Git and point the Vcs-* fields to Gitorious.
* Bump Standards-Version to 3.9.1 with no changes.
* Refresh the copyright file:
  - change "Debian GNU/Linux systems" to "Debian systems"
  - update to the latest version of the DEP 5 candidate format
  - bump the year on my copyright notice
* Use bzip2 compression for the tarball.
* Bump the debhelper compatibility level to 8 with no changes.

Author: Peter Pentchev
Revision Date: 2010-06-02 11:18:57 UTC

* Update to the 3.0 (native) source format with no changes.
* Bump Standards-Version to 3.8.4:
  - remove the version from the Perl build dependency
* Update the copyright file to the latest revision of DEP 5 and
  bump the year on my copyright notice.

Author: Peter Pentchev
Revision Date: 2010-06-02 11:18:57 UTC

* Update to the 3.0 (native) source format with no changes.
* Bump Standards-Version to 3.8.4:
  - remove the version from the Perl build dependency
* Update the copyright file to the latest revision of DEP 5 and
  bump the year on my copyright notice.

Author: Peter Pentchev
Revision Date: 2009-05-16 18:27:40 UTC

* New maintainer. Closes: #522257
* Fix the changelog format by removing the Vim formatting codes.
* Do not install the empty /usr/sbin directory and remove
  the debian/dirs file altogether.
* Convert the copyright file to the machine-parseable format and
  add my copyright notice.
* Bump the debhelper compatibility level to 7:
  - store it in debian/compat
  - use debian/debsigs as the build directory instead of debian/tmp
  - add misc:Depends to the binary package
  - remove the dh_installmanpages invocation, all the manual pages
    are installed by the Perl build framework itself
  - use dh_prep instead of dh_clean in the "install" target
* Remove the debian/debsigs.undocumented file - both programs listed
  there have already been documented.
* Bump Standards-Version to 3.8.1:
  - move debhelper to Build-Depends from Build-Depends-Indep
* Add the Vcs-Svn and Vcs-Browser source control fields.
* Make the short description a noun phrase.
* Clean up the rules file:
  - do not ignore "make clean" errors
  - remove some commented-out cruft
  - remove the OPTIMIZE flags to Makefile.PL - no C code here
  - pass -k to dh_clean in the "install" target
  - move some dh_* invocations from the "binary-indep" to the "install"
    target to mimic the behavior of the dh(1) tool
  - remove some dh_* invocations that simply do not apply
  - finally, minimize this file using debhelper 7's dh(1) tool :)
* Stop debsigs-autosign from always passing key ID's and keyring paths
  to debsigs; gpg is smart enough to figure out which key to use and
  where to find it. Closes: #161541
* Make the test script include all the modules.
* Use strict mode and enable Perl warnings for all modules and scripts.
* Set the version of the debsigsmain module to the package's version.
* Bump the version of all the other modules.
* Add my copyright notice to the modules.
* Add -h and -V options and syntax() and version() functions to
  all the executable scripts. Closes: #175337, #175338
* Fix a misspelled variable name in debsigs-autosign.
* Document the signature types in the debsigs usage message and
  manual page, and refer to it from the debsigs-autosign ones.
  Closes: #457319
* Make the binary package recommend debsig-verify. Closes: #163643
* Teach debsigs-signchanges to extract the key ID from the changes
  file if it is not specified in $DEBSIGSOPTIONS. Closes: #98088
* Rework debsigs-signchanges so it recalculates all types of checksums
  listed in the changes file, not just MD5 ones.
* Add the fixup() function to the arf module to read an archive file
  and remove the trailing slashes in the member names. Invoke that
  function in debsigs. Closes: #161680

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Branden Robinson
Revision Date: 2002-09-19 17:55:29 UTC

* debsigs, debsigs-autosign: you can't use a module and run one of its
  methods at the same time; do these things separately (thanks, Joey Hess)
  (Closes: #161542)
* debsigs: stop hard-coding the path to gpg (thanks, Joey Hess)
  (Closes: #161543)
* debsigs: update $VERSION
* debsigs: add FUTURE DIRECTIONS section to POD
* debsigs-signchanges: only dig into @ARGV if it's defined (thanks, Joey
  Hess) (Closes: #161540)
* debsigs-installer: wrote rudimentary manpage

* debian/control:
  - bump Standards-Version to 3.5.7 (no changes needed)
  - add dependency on gnupg (Closes: #161544)

Author: Peter Pentchev
Revision Date: 2009-05-16 18:27:40 UTC

* New maintainer. Closes: #522257
* Fix the changelog format by removing the Vim formatting codes.
* Do not install the empty /usr/sbin directory and remove
  the debian/dirs file altogether.
* Convert the copyright file to the machine-parseable format and
  add my copyright notice.
* Bump the debhelper compatibility level to 7:
  - store it in debian/compat
  - use debian/debsigs as the build directory instead of debian/tmp
  - add misc:Depends to the binary package
  - remove the dh_installmanpages invocation, all the manual pages
    are installed by the Perl build framework itself
  - use dh_prep instead of dh_clean in the "install" target
* Remove the debian/debsigs.undocumented file - both programs listed
  there have already been documented.
* Bump Standards-Version to 3.8.1:
  - move debhelper to Build-Depends from Build-Depends-Indep
* Add the Vcs-Svn and Vcs-Browser source control fields.
* Make the short description a noun phrase.
* Clean up the rules file:
  - do not ignore "make clean" errors
  - remove some commented-out cruft
  - remove the OPTIMIZE flags to Makefile.PL - no C code here
  - pass -k to dh_clean in the "install" target
  - move some dh_* invocations from the "binary-indep" to the "install"
    target to mimic the behavior of the dh(1) tool
  - remove some dh_* invocations that simply do not apply
  - finally, minimize this file using debhelper 7's dh(1) tool :)
* Stop debsigs-autosign from always passing key ID's and keyring paths
  to debsigs; gpg is smart enough to figure out which key to use and
  where to find it. Closes: #161541
* Make the test script include all the modules.
* Use strict mode and enable Perl warnings for all modules and scripts.
* Set the version of the debsigsmain module to the package's version.
* Bump the version of all the other modules.
* Add my copyright notice to the modules.
* Add -h and -V options and syntax() and version() functions to
  all the executable scripts. Closes: #175337, #175338
* Fix a misspelled variable name in debsigs-autosign.
* Document the signature types in the debsigs usage message and
  manual page, and refer to it from the debsigs-autosign ones.
  Closes: #457319
* Make the binary package recommend debsig-verify. Closes: #163643
* Teach debsigs-signchanges to extract the key ID from the changes
  file if it is not specified in $DEBSIGSOPTIONS. Closes: #98088
* Rework debsigs-signchanges so it recalculates all types of checksums
  listed in the changes file, not just MD5 ones.
* Add the fixup() function to the arf module to read an archive file
  and remove the trailing slashes in the member names. Invoke that
  function in debsigs. Closes: #161680