bladerf 0.2023.02-5 source package in Ubuntu
Changelog
bladerf (0.2023.02-5) unstable; urgency=medium * use option TREAT_WARNINGS_AS_ERRORS=OFF because gcc-14 has new unexpected warnings. (Closes: #1074849) -- A. Maitland Bottoms <email address hidden> Thu, 25 Jul 2024 10:20:28 -0400
Upload details
- Uploaded by:
- A. Maitland Bottoms
- Uploaded to:
- Sid
- Original maintainer:
- A. Maitland Bottoms
- Architectures:
- any all
- Section:
- misc
- Urgency:
- Medium Urgency
See full publishing history Publishing
Series | Published | Component | Section | |
---|---|---|---|---|
Oracular | release | universe | misc |
Downloads
File | Size | SHA-256 Checksum |
---|---|---|
bladerf_0.2023.02-5.dsc | 3.0 KiB | d698e3d0138cc59cb5470870101371b3d6bae88ce0d41eb01262e9c6f120a71a |
bladerf_0.2023.02.orig-drivers.tar.xz | 11.1 MiB | 38a620bd952f0e3debf10f6991a80adfdf4fc651a51d08463f64790efa1b0c31 |
bladerf_0.2023.02.orig.tar.gz | 2.2 MiB | 3bbac54ad7d6e35be31eb12393be5e7102a070fb1ddc176992d64a6a623670c7 |
bladerf_0.2023.02-5.debian.tar.xz | 54.4 KiB | 0ea4b10a9278012ded21aceab5a56719c6518bb7bdca4e296fa323e0256b2fbd |
Available diffs
No changes file available.
Binary packages built by this source
- bladerf: Nuand bladeRF software-defined radio device (tools)
The Nuand bladeRF is an open-source software-defined radio (SDR) system,
comprised of an RF transceiver, a field-programmable gate array (FPGA),
a microcontroller driving a USB 3.0 interface, and a suite of host
libraries and drivers to facilitate interaction with the device.
.
This package provides command-line tools for controlling the bladeRF.
- bladerf-dbgsym: debug symbols for bladerf
- bladerf-firmware-fx3: Nuand bladeRF firmware downloader (FX3)
This empty package will, at the time of installation, download an appropriate
firmware image for using the Nuand bladeRF with a Cypress FX3 USB
controller. The image will be downloaded from http://Nuand.com/ fx3/
and saved to /usr/share/Nuand/bladeRF.
.
This bitstream will work for either the Nuand bladeRF x40 or the x115.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
- bladerf-fpga-hostedx115: Nuand bladeRF FPGA bitstream downloader (hostedx115)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
http://Nuand.com/ fpga/ and saved to /usr/share/ Nuand/bladeRF.
.
This bitstream is for the bladeRF x115 with the Altera Cyclone IV
EP4CE115 FPGA.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
- bladerf-fpga-hostedx40: Nuand bladeRF FPGA bitstream downloader (hostedx40)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
http://Nuand.com/ fpga/ and saved to /usr/share/ Nuand/bladeRF.
.
This bitstream is for the bladeRF x40 with the Altera Cyclone IV
EP4CE40 FPGA.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
- bladerf-fpga-hostedxa4: Nuand bladeRF FPGA bitstream downloader (hostedxA4)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
https://nuand. com/fpga/ and saved to /usr/share/ Nuand/bladeRF.
.
This bitstream is for the bladeRF 2.0 Micro xA4 with the Altera Cyclone V
5CEBA4 FPGA.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
- bladerf-fpga-hostedxa5: Nuand bladeRF FPGA bitstream downloader (hostedxA5)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
https://nuand. com/fpga/ and saved to /usr/share/ Nuand/bladeRF.
.
This bitstream is for the bladeRF 2.0 Micro xA5 with the Altera Cyclone V
77KLE FPGA
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
- bladerf-fpga-hostedxa9: Nuand bladeRF FPGA bitstream downloader (hostedxA9)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
https://nuand. com/fpga/ and saved to /usr/share/ Nuand/bladeRF.
.
This bitstream is for the bladeRF 2.0 Micro xA9 with the Altera Cyclone V
5CEBA9 FPGA.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
- libbladerf-dev: Nuand bladeRF software-defined radio device (header files)
The Nuand bladeRF is an open-source software-defined radio (SDR) system,
comprised of an RF transceiver, a field-programmable gate array (FPGA),
a microcontroller driving a USB 3.0 interface, and a suite of host
libraries and drivers to facilitate interaction with the device.
.
This package contains the header files required for compiling bladeRF
applications.
- libbladerf-doc: Nuand bladeRF software-defined radio device (API documentation)
The Nuand bladeRF is an open-source software-defined radio (SDR) system,
comprised of an RF transceiver, a field-programmable gate array (FPGA),
a microcontroller driving a USB 3.0 interface, and a suite of host
libraries and drivers to facilitate interaction with the device.
.
This package contains libbladeRF API documentation.
- libbladerf2: Nuand bladeRF software-defined radio device
The Nuand bladeRF is an open-source software-defined radio (SDR) system,
comprised of an RF transceiver, a field-programmable gate array (FPGA),
a microcontroller driving a USB 3.0 interface, and a suite of host
libraries and drivers to facilitate interaction with the device.
.
This package provides the host library.
- libbladerf2-dbgsym: debug symbols for libbladerf2
- python3-bladerf: Nuand bladeRF software-defined radio device (Python)
The Nuand bladeRF is an open-source software-defined radio (SDR) system,
comprised of an RF transceiver, a field-programmable gate array (FPGA),
a microcontroller driving a USB 3.0 interface, and a suite of host
libraries and drivers to facilitate interaction with the device.
.
This package provides Python bindings for controlling the bladeRF.