sudo ./network test -i wlan0 -t iperf --target 192.168.0.10
DEBUG:root:Shutting down interface:virbr0
DEBUG:root:Shutting down interface:eth0
WARNING:root:No max speed detected, assuming Wireless deviceand continuing with test.
DEBUG:root:timeout 180 iperf -c transit -n 1024M
WARNING:root:iperf timed out - this should be OK
------------------------------------------------------------
Client connecting to transit, TCP port 5001
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.0.101 port 35363 connected with 192.168.0.10 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-180.0 sec 458 MBytes 21.3 Mbits/sec
ERROR:root:Max Speed was not reported properly. Run ethtool and verify that the card is properly reporting its capabilities.
ERROR:root:float division by zero
Transfer speed: 21.3 Mb/s
WARNING:root:Unable to obtain maximum speed, so I can't decide if it passed the required threshold.Considering the test as passed, but pleasereview the results manually and decide ifperformance is acceptable
DEBUG:root:Restoring interface:virbr0
DEBUG:root:Restoring interface:eth0
sudo ./network test -i wlan0 -t iperf --target 192.168.0.10 ------- ------- ------- ------- ------- ------- ------- ---- ------- ------- ------- ------- ------- ------- ------- ----
DEBUG:root:Shutting down interface:virbr0
DEBUG:root:Shutting down interface:eth0
WARNING:root:No max speed detected, assuming Wireless deviceand continuing with test.
DEBUG:root:timeout 180 iperf -c transit -n 1024M
WARNING:root:iperf timed out - this should be OK
-------
Client connecting to transit, TCP port 5001
TCP window size: 85.0 KByte (default)
-------
[ 3] local 192.168.0.101 port 35363 connected with 192.168.0.10 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-180.0 sec 458 MBytes 21.3 Mbits/sec
ERROR:root:Max Speed was not reported properly. Run ethtool and verify that the card is properly reporting its capabilities.
ERROR:root:float division by zero
Transfer speed: 21.3 Mb/s Considering the test as passed, but pleasereview the results manually and decide ifperformance is acceptable Restoring interface:virbr0 Restoring interface:eth0
WARNING:root:Unable to obtain maximum speed, so I can't decide if it passed the required threshold.
DEBUG:root:
DEBUG:root: