hi bill wear,
We are installing maas in ipv6 machine.
MAAS version: 3.2.6
we have provisioned ip address configured in eth0 like below:
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 1c:98:ec:13:17:10 brd ff:ff:ff:ff:ff:ff
inet6 fd17:22:1::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::1e98:ecff:fe13:1710/64 scope link
valid_lft forever preferred_lft forever
And the subnet (fd17:22:1::1/64) is enlisted in maas console (screenshots attached), it is ipv6 we may not need dhcp but since we do pxe boot it requires a dhcp server. so we enabled dhcp server in maas and setup the ranges.
And also we create radvd.conf : (contents are attached)
When we boot the idrac by using pxe boot, it assigned /128 ip address instead of /64 ip address and that causes the boot process fail (screenshot attached)
hi bill wear,
We are installing maas in ipv6 machine.
MAAS version: 3.2.6
we have provisioned ip address configured in eth0 like below: MULTICAST, UP,LOWER_ UP> mtu 1500 qdisc mq state UP group default qlen 1000 ecff:fe13: 1710/64 scope link
2: eth0: <BROADCAST,
link/ether 1c:98:ec:13:17:10 brd ff:ff:ff:ff:ff:ff
inet6 fd17:22:1::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::1e98:
valid_lft forever preferred_lft forever
And the subnet (fd17:22:1::1/64) is enlisted in maas console (screenshots attached), it is ipv6 we may not need dhcp but since we do pxe boot it requires a dhcp server. so we enabled dhcp server in maas and setup the ranges.
And also we create radvd.conf : (contents are attached)
When we boot the idrac by using pxe boot, it assigned /128 ip address instead of /64 ip address and that causes the boot process fail (screenshot attached)
Please find all the screenshots as zip file