The UA customer tried all options in the cipher suite drop-down list, but no luck.
The customer also found different behaviors of 'ipmitool lan print' between before/after adding the Lenovo x3650 M5 into MAAS.
Pre-enlistment:
root@bionic-maas:~# ipmitool -I lanplus -H 100.88.20.2 -U USERID -P PASSW0RD lan print
Set in Progress : Set Complete
Auth Type Support : NONE MD5 PASSWORD
Auth Type Enable : Callback : : User : MD5 PASSWORD : Operator : MD5 PASSWORD : Admin : MD5 PASSWORD : OEM :
IP Address Source : Static Address
IP Address : 100.88.20.2
Subnet Mask : 255.255.255.0
MAC Address : 08:94:ef:48:f0:55
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Gratituous ARP Intrvl : 2.0 seconds
Default Gateway IP : 100.88.20.254
Default Gateway MAC : 00:00:00:00:00:00
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
RMCP+ Cipher Suites : 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
Cipher Suite Priv Max : aaaaaaaaaaaaaaa : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM
Bad Password Threshold : 0
Invalid password disable: no
Attempt Count Reset Int.: 0
User Lockout Interval : 0
<<OPEN SESSION RESPONSE
<< Message tag : 0x00
<< RMCP+ status : no matching cipher suite
<< Maximum privilege level : Unknown (0x00)
<< Console Session ID : 0xa0a2a3a4
Error in open session response message : no matching cipher suite
Error: Unable to establish IPMI v2 / RMCP+ session
The UA customer tried all options in the cipher suite drop-down list, but no luck.
The customer also found different behaviors of 'ipmitool lan print' between before/after adding the Lenovo x3650 M5 into MAAS.
Pre-enlistment:
root@bionic-maas:~# ipmitool -I lanplus -H 100.88.20.2 -U USERID -P PASSW0RD lan print
: User : MD5 PASSWORD
: Operator : MD5 PASSWORD
: Admin : MD5 PASSWORD
: OEM : 5,6,7,8, 9,10,11, 12,13,14, 15,16
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM
Set in Progress : Set Complete
Auth Type Support : NONE MD5 PASSWORD
Auth Type Enable : Callback :
IP Address Source : Static Address
IP Address : 100.88.20.2
Subnet Mask : 255.255.255.0
MAC Address : 08:94:ef:48:f0:55
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Gratituous ARP Intrvl : 2.0 seconds
Default Gateway IP : 100.88.20.254
Default Gateway MAC : 00:00:00:00:00:00
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
RMCP+ Cipher Suites : 1,2,3,4,
Cipher Suite Priv Max : aaaaaaaaaaaaaaa
Bad Password Threshold : 0
Invalid password disable: no
Attempt Count Reset Int.: 0
User Lockout Interval : 0
Post-enlistment:
root@bionic-maas:~# ipmitool -I lanplus -H 100.88.20.2 -U USERID -P PASSW0RD lan print -vvv
>> Sending IPMI command payload
>> netfn : 0x06
>> command : 0x38
>> data : 0x8e 0x04
BUILDING A v1.5 COMMAND
>> IPMI Request Session Header
>> Authtype : NONE
>> Sequence : 0x00000000
>> Session ID : 0x00000000
>> IPMI Request Message Header
>> Rs Addr : 20
>> NetFn : 06
>> Rs LUN : 0
>> Rq Addr : 81
>> Rq Seq : 00
>> Rq Lun : 0
>> Command : 38
<< IPMI Response Session Header
<< Authtype : NONE
<< Payload type : IPMI (0)
<< Session ID : 0x00000000
<< Sequence : 0x00000000
<< IPMI Msg/Payload Length : 16
<< IPMI Response Message Header
<< Rq Addr : 81
<< NetFn : 07
<< Rq LUN : 0
<< Rs Addr : 20
<< Rq Seq : 00
<< Rs Lun : 0
<< Command : 38
<< Compl Code : 0x00
>> SENDING AN OPEN SESSION REQUEST
<<OPEN SESSION RESPONSE
<< Message tag : 0x00
<< RMCP+ status : no matching cipher suite
<< Maximum privilege level : Unknown (0x00)
<< Console Session ID : 0xa0a2a3a4
Error in open session response message : no matching cipher suite
Error: Unable to establish IPMI v2 / RMCP+ session