Ubuntu
linux-source-2.6.15 package

Soundcard not detected in Dapper

Bug #49287 reported by marco neudorfer
4
Affects Status Importance Assigned to Milestone
linux-source-2.6.15 (Ubuntu)
Invalid
Low
Brian Murray

Bug Description

The onboard soundcard on my ASUS A7N8X-X motherboard was not detected by Dapper. Breezy has no problems with this soundcard.

Revision history for this message
Daniel T Chen (crimsun) wrote :

Please attach (don't inline) the output from ``lspci -v && lspci -nv''.

Revision history for this message
marco neudorfer (mneudorfer) wrote : Re: [Bug 49287] Re: Soundcard not detected in Dapper

Daniel T Chen schreef:

>Please attach (don't inline) the output from ``lspci -v && lspci -nv''.
>
>** Changed in: Ubuntu
>Sourcepackagename: None => linux-source-2.6.15
> Importance: Untriaged => Low
> Status: Unconfirmed => Needs Info
>
>
>
That's not possible because i reinstalled Breezy again. Sorry.

Revision history for this message
Ben Collins (ben-collins) wrote :

The lspci -vv and lspci -vvn output on breezy should be the same. Since you have a work breezy install, then you can possibly get the output of "cat /proc/asound/modules" too.

Revision history for this message
marco neudorfer (mneudorfer) wrote :

Ben Collins schreef:

>The lspci -vv and lspci -vvn output on breezy should be the same. Since
>you have a work breezy install, then you can possibly get the output of
>"cat /proc/asound/modules" too.
>
>
>
Ok, i gave the 3 commands in a terminal, and copied and pasted the
output in a OpenOffice-writer document.
It is included. Thanks for your effords and good luck solving the problem.

Marco

Revision history for this message
marco neudorfer (mneudorfer) wrote :

Daniel T Chen schreef:

>Please attach (don't inline) the output from ``lspci -v && lspci -nv''.
>
>** Changed in: Ubuntu
>Sourcepackagename: None => linux-source-2.6.15
> Importance: Untriaged => Low
> Status: Unconfirmed => Needs Info
>
>
>
Ok, i gave the 2 commands in a terminal, and copied and pasted the
output in a OpenOffice-writer document.
It is included. Thanks for your effords and good luck solving the problem.

Marco

Revision history for this message
Dennis Kaarsemaker (dennis) wrote : Re: [Bug 49287] Re: [Bug 49287] Re: Soundcard not detected in Dapper

Mail attachments don't work. Please use the web interface to attach
files.

Revision history for this message
marco neudorfer (mneudorfer) wrote :
Download full text (17.7 KiB)

marco@ubuntu:~$ lspci -vv
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
        Subsystem: Asustek Computer, Inc.: Unknown device 80ac
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
        Subsystem: Asustek Computer, Inc. A7N8X Mainboard
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: <available only to root>

0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 0c11
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at c000 [size=32]
        Capabilities: <available only to root>

0000:00:02.0 USB Controller: nVidia Corporation...

Revision history for this message
marco neudorfer (mneudorfer) wrote :
Download full text (9.6 KiB)

marco@ubuntu:~$ lspci -v
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
        Subsystem: Asustek Computer, Inc.: Unknown device 80ac
        Flags: bus master, 66MHz, fast devsel, latency 0
        Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) Subsystem: nVidia Corporation: Unknown device 0c17
        Flags: 66MHz, fast devsel

0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
        Subsystem: Asustek Computer, Inc. A7N8X Mainboard
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: <available only to root>

0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
        Subsystem: Asustek Computer, Inc.: Unknown device 0c11
        Flags: 66MHz, fast devsel, IRQ 5
        I/O ports at c000 [size=32]
        Capabilities: <available only to root>

0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
        Subsystem: Asustek Computer, Inc. A7N8X Mainboard
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at e7003000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
        Subsystem: Asustek Computer, Inc. A7N8X Mainboard
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at e7004000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <available only to root>

0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
        Subsystem: Asustek Computer, Inc. A7N8X Mainboard
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at e7005000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
        Subsystem: Asustek Computer, Inc. A7N8X Mainboard onboard nForce2 Ethernet
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at e7000000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at c400 [size=8]
        Capabilities: <available only to root>

0000:00:06.0 Multimedia audio controller: nVidia ...

Read more...

Revision history for this message
marco neudorfer (mneudorfer) wrote : Re: [Bug 49287] Re: [Bug 49287] Re: [Bug 49287] Re: Soundcard not detected in Dapper

Dennis Kaarsemaker schreef:

>Mail attachments don't work. Please use the web interface to attach
>files.
>
>
>
Done.

Revision history for this message
Müschback (michab-ma) wrote : no soundcard in dapper

Hi,

I have the same problem. Before installing dapper, sound was working fine. I will add two attachments with lspci command output.

As far as I see, soundcard is only av for root...
Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
 Capabilities: <available only to root>

How can I change this??

Thanks in advance,
Mueschback

Revision history for this message
Müschback (michab-ma) wrote : lspci-nv [2. file]

see description above

Revision history for this message
Brian Murray (brian-murray) wrote :

Thanks for taking the time to report this bug and helping to make Ubuntu better. You reported this bug a while ago and there hasn't been any activity in it recently. We were wondering is this still an issue for you? Thanks in advance.

Changed in linux-source-2.6.15:
assignee: nobody → brian-murray
Revision history for this message
Brian Murray (brian-murray) wrote :

We are closing this bug report as it lacks the information, described in the previous comments, we need to investigate the problem further. However, please reopen it if you can give us the missing information and feel free to submit bug reports in the future.

Changed in linux-source-2.6.15:
status: Incomplete → Invalid
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.