System testing: cycle between video modes didn't happen

Bug #437151 reported by Matej Kenda
26
This bug affects 5 people
Affects Status Importance Assigned to Milestone
x11-xserver-utils (Ubuntu)
Confirmed
Undecided
Unassigned

Bug Description

Binary package hint: x11-xserver-utils

I ran system testing on Compaq Evo N1015v. Cycling between video modes didn't happen.

Karmic Alpha 6 + updates.

ProblemType: Bug
Architecture: i386
CheckboxCommand: xrandr_cycle
CheckboxTest: xrandr_cycle
Date: Sat Sep 26 13:43:51 2009
DistroRelease: Ubuntu 9.10
Lsusb:
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 001 Device 002: ID 093a:2510 Pixart Imaging, Inc.
 Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: Compaq Presario
Package: x11-xserver-utils 7.4+2ubuntu3
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   3.3V 32-bit PC Card
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-11-generic root=UUID=737a8285-476e-4d78-9849-96d939d64b95 ro quiet splash
ProcEnviron:
 SHELL=/bin/bash
 LANG=sl_SI.UTF-8
ProcVersionSignature: Ubuntu 2.6.31-11.36-generic
RelatedPackageVersions:
 xserver-xorg 1:7.4+3ubuntu5
 libgl1-mesa-glx 7.6.0~git20090817.7c422387-0ubuntu5
 libdrm2 2.4.13-1ubuntu1
 xserver-xorg-video-intel 2:2.8.1-1ubuntu2
 xserver-xorg-video-ati 1:6.12.99+git20090825.fc74e119-0ubuntu2
SourcePackage: x11-xserver-utils
Tags: checkbox-bug
Uname: Linux 2.6.31-11-generic i686
XorgConf: Error: [Errno 2] No such file or directory: '/etc/X11/xorg.conf'
dmi.bios.date: 11/25/2003
dmi.bios.vendor: Phoenix
dmi.bios.version: 0F0B
dmi.board.name: 07D4h
dmi.board.vendor: Compaq
dmi.board.version: KBC Revision: 1328
dmi.chassis.type: 10
dmi.chassis.vendor: Compaq
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnPhoenix:bvr0F0B:bd11/25/2003:svnCompaq:pnPresario:pvr0100:rvnCompaq:rn07D4h:rvrKBCRevision1328:cvnCompaq:ct10:cvrN/A:
dmi.product.name: Presario
dmi.product.version: 0100
dmi.sys.vendor: Compaq
fglrx: Not loaded
system:
 distro: Ubuntu
 architecture: i686kernel: 2.6.31-11-generic

[lspci]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility U1 [1002:4336]
     Subsystem: Compaq Computer Corporation Device [0e11:00b0]

Revision history for this message
Matej Kenda (matejken) wrote :
Bryce Harrington (bryce)
Changed in x11-xserver-utils (Ubuntu):
status: New → Confirmed
Revision history for this message
yoda42 (yoda42) wrote :

Release: 9.10 Ubuntu karmic (development branch)
System: Dell 1525n

PROBLEM:
System testing test 'cycle through the detected video modes for your system' does not " cycle through any modes.

DIAGNOSIS:
Expected behavior is not observed.

CURE:
Unknown. Need guidance from system testing video mode testing developer. Willing to help retest.

Bryce Harrington (bryce)
tags: added: karmic
Bryce Harrington (bryce)
description: updated
Revision history for this message
Matej Kenda (matejken) wrote :

I observer two additional phenomena on the same computer:

* Screensaver doesn't turn on. Screen just blinks when screensaver should be activated.
* When the power cord is detached, the screen goes black. I assume that the driver tries to lower the backlight, however I'm not sure whether the laptop has this functionality at all.

Is it possible that they have the same root cause?

Revision history for this message
Matej Kenda (matejken) wrote :

Please see drm related kernel messages from the latest kernel. Is it OK that KMS is disabled?

$ uname -a
Linux knd 2.6.31-11-generic #38-Ubuntu SMP Fri Oct 2 11:55:55 UTC 2009 i686 GNU/Linux

$ dmesg | grep "\[drm\]"

[ 9.506836] [drm] Initialized drm 1.1.0 20060810
[ 11.245492] [drm] radeon default to kernel modesetting DISABLED.
[ 11.246930] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
[ 28.188395] [drm] Setting GART location based on new memory map
[ 28.188414] [drm] Loading R100 Microcode
[ 28.188464] [drm] writeback test succeeded in 1 usecs
[ 141.798236] [drm] Loading R100 Microcode

Revision history for this message
Matej Kenda (matejken) wrote :

Screensaver and power management functions worked properly with Jaunty. This is regression potential.

tags: added: regression-potential
Revision history for this message
Matej Kenda (matejken) wrote :

After upgrading to kernel 2.6.31-11 the screensaver works properly, however the screen still goes black when unplugging the power cord.

Revision history for this message
Matej Kenda (matejken) wrote :

Sorry, I meant kernel 2.6.31-13.

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.