bcmxcp driver from nut not working
| Affects | Status | Importance | Assigned to | Milestone | |
|---|---|---|---|---|---|
| nut (Ubuntu) |
Fix Released
|
Low
|
Emmet Hikory | ||
Bug Description
Binary package hint: nut
The driver bcmxcp is not wokring on feisty.
nut version is: nut-2.0.5
I'm working with UPS HP R3000 XR, I'm not sure if the problem is limited to this UPS model.
Steps to reproduce:
sudo apt-get install nut
configure nut use the bcmxcp driver
start nut
sudo /etc/init.d/nut start
Network UPS Tools - UPS driver controller 2.0.5
Network UPS Tools - BCMXCP UPS driver 0.11 (2.0.5)
Communications with UPS lost: Error executing command
Communications with UPS lost: Error executing command
Communications with UPS lost: Error executing command
Communications with UPS lost: Error executing command
Communications with UPS re-established
Connected to UPS on /dev/ttyS0 baudrate: 19200
Communications with UPS lost: Receive error (Request command): 9!!!
Communications with UPS lost: Receive error (Request command): 9!!!
Communications with UPS lost: Receive error (Request command): 9!!!
Communications with UPS lost: Error executing command
Could not communicate with the ups
Driver failed to start (exit status=1)
This problem has been resolved in the nut mail list.
http://
And they provide a patch to solve it.
I have tried this patch in feisty and it worked just fine.
Related branches
| Jose Blanca (jblanca) wrote | #1 |
| Luca Falavigna (dktrkranz) wrote | #2 |
| Changed in nut: | |
| status: | New → Confirmed |
| Changed in nut: | |
| assignee: | nobody → persia |
| importance: | Undecided → Low |
| status: | Confirmed → In Progress |
| Emmet Hikory (persia) wrote | #3 |
| Changed in nut: | |
| status: | In Progress → Fix Committed |
| Luca Falavigna (dktrkranz) wrote | #4 |
| Changed in nut: | |
| status: | Fix Committed → Fix Released |
The patch from the nut mail list